Turbulence modelling of the shear layers in the trailing edge region of a modern rear-loaded airfoil at incidence

After carefull analysis in a turbulent zero-pressure gradient flow, various simple algebraic turbulence models were applied to the almost separated flow on the upperside of an airfoil at incidence. The Johnson-King and Horton non-equilibrium (or rate equation) models give clearly improved results.     

Solution of the hyperbolic mild‐slope equation using the finite volume method

A finite volume solver for the 2D depth‐integrated harmonic hyperbolic formulation of the mild‐slope equation for wave propagation is presented and discussed. The solver is implemented on unstructured triangular meshes and the solution methodology is based upon a Godunov‐type second‐order finite volume scheme, whereby the numerical fluxes are computed using Roe's flux function. The eigensystem of the mild‐slope equations is derived and used for the construction of Roe's matrix. A formulation that updates the unknown variables in time implicitly is presented, which produces a more accurate and reliable scheme than hitherto available. Boundary conditions for different types of boundaries are also derived. The agreement of the computed results with analytical results for a range of wave propagation/transformation problems is very good, and the model is found to be virtually paraxiality‐free. Copyright © 2003 John Wiley & Sons, Ltd.     

Nonlinear modelling and control of a common rail injection system for diesel engines

Modern trends in designing mechatronic systems call for a synergic design of the separated subsystems (mechanic, electronic parts, control modules, etc.) concurring to the overall performance. Following this point of view, this paper presents a control oriented model and a nonlinear control design for a Common Rail injection system. First a model is developed, which is tuned in a virtual simulation environment, representing the injection system in details in a reliable replication of reality. Then a sliding mode control is developed. Both the model of the injection process and of the control law are validated by a virtual detailed simulation environment. The prediction capability of the model and the control efficiency are clearly shown.     

The Effect of Boundary Conditions on Gas-phase Synthesised Silver Nanoparticles

We have prepared spherical non-agglomerated silver nanoparticles by an evaporation–condensation–dilution/cooling technique. Silver was evaporated from a crucible in a tubular flow reactor. A porous tube diluter was used to quench the carrier gas at the outlet of the reactor to enhance the formation of small particles and to suppress agglomeration and other particle growth mechanisms. The number size distribution of the prepared particles was measured with a differential mobility analyser–condensation nucleus counter combination and the size and the shape of the particles were analysed with transmission electron microscope. The system was modelled using a sectional aerosol dynamics computer code to estimate the importance of different aerosol processes. In all conditions the particles obtained were non-agglomerated and spherical. The mean particle diameter varied from 4 to 10-nm depending on boundary conditions. From the modelling studies it can be concluded that the nucleation rate is the most important parameter controlling the final particle size.     

Ab initio modelling of crosslinking in polymers. A case of chains with furan rings

A quantum chemical model (Abinitio HF-MO and DFT-B3LYP) of polyfurfuryl alcohol crosslinking is shown. Two pathways were considered: (a) a Diels–Alder (D–A) reaction between a dihydrofuran moiety and a furan ring; (b) the addition reaction of electrophilic specimens on conjugated double bonds. The ability for the formation of D–A adducts (dienes and dienophiles) was investigated by the frontier molecular orbital (FMO) theory. Energy gaps between the FMO's of diene and dienophile structures suggest that the occurrence of the D–A reaction is possible. The results suggest that the carbons of the exo double bonds attached to dihydrofuran rings are the sites most likely to be attacked by electrophilic species, while the C₃ and C₄ atoms display the opposite tendency due to their low HOMO electron densities. Results of a thermochemical approach to these reactions at the MP2 level was in agreement with reactivity modelled by MO predictions.     

金融时间序列分析与建模

介绍了金融时间序列分析与建模的主要理论、方法,着重论述了近20多年发展起来的非平稳时间序列的建模方法及工具,指出进一步的研究方向.最后,对上证综合指数这一金融时间序列进行了实证分析.     

Considerations on modelling the market for softwood lumber in the United States

The analysis in this paper looks at two important elements in modelling the market for timber in the United States. First, the issue of directional causality between price and quantity and its implications in a modelling effort is investigated. Second, the extent of the geographic market for timber is discussed and a method of detecting it is suggested. The method for detecting the extent of the geographical market is tractable and can be applied in a straightforward way. Both considerations are applied to the softwood lumber market in the United States.     

Response of line focus acoustic microscope to specimen containing a subsurface crack

A numerical model is presented to calculate V(z) and V(x, z) curves for a line focus acoustic microscope and a specimen containing a subsurface crack. In this model, a Gaussian beam which is tracked through the lens into the coupling fluid and into the specimen, interacts with the crack. The numerical approach is based on the solution of singular integral equations by the boundary element method. The system of singular integral equations follows from the conditions at the interface of the coupling fluid and the specimen and on the faces of the crack. An electromechanical reciprocity relation is used to express the voltage at the terminals of the microscope's transducer in terms of the calculated incident and back-scattered fields. V(z) and V(x, z) curves are presented for various locations and orientations of the crack. The characteristic features of the V(z) and particularly the V(x, z) curves, as they relate to crack configuration, are discussed in some detail.