Photocatalytic Reduction of NO with C2H6 on a Hollandite-Type Catalyst

The photocatalytic reduction of nitrogen monoxide (NO) with ethane on the hollandite type catalyst (K₂Ga₂Sn₆O₁₆KGSO) was investigated. Using a closed-gas circulating system equipped with a Q-MASS detector and in-situ diffuse reflectance FT-IR spectroscopy. The reactant gases of NO and ¹³C₂H₆ decreased with the increasing irradiation time. In contrast, the N₂ yield increased proportionally to the conversion of ¹³C₂H₆. Nitrogen oxides such as N₂O did not reach their detectable levels. The NO adsorbed on KGSO was found to change to its activated species by UV irradiation. The oxidized products of C₂H₆ such as CH₃CHO increased in proportion to the reaction time. The present results strongly suggest that KGSO has remarkable photocatalytic activity for the reduction of NO with C₂H₆.     

Diffuse reflectance spectroscopy—Important developments

Effect of front surface reflectance is incorporated into standard Kubelka-Munk theory of diffuse reflection. A method of obtaining the absorption coefficient independent of scattering coefficient is presented.     

A Structural Investigation of La2(GeO4)O and Alkaline-Earth-Doped La9.33(GeO4)6O2

The structures of the oxyorthogermanate La₂(GeO₄)O and the apatite-structured La_9.33(GeO₄)₆O₂ have been refined from powder neutron diffraction data. La₂(GeO₄)O crystallizes in a monoclinic unit cell (P2₁/c) and is cation stoichiometric in contrast to previous reports. La_9.33(GeO₄)₆O₂ crystallizes in a hexagonal unit cell (P6₃/m) and the powder diffraction data show anisotropic peak broadening that is observed in electron diffraction patterns as incommensurate diffuse spots at hkq reciprocal planes (with q=1.6-1.7) and can be attributed to a correlated disorder in the “apatite channels”. This compound was doped up to a nominal composition close to M₂La₈(GeO₄)₆O₂ with M=Ca, Sr, Ba. The dopant ions preferentially occupy the 4f sites as the number of La vacancies decreases. The measured ionic conductivity of La_9.33(GeO₄)₆O₂ is about 3 orders of magnitude larger than for La₂(GeO₄)O at high temperatures and decreases with increasing dopant content from the highest value of about 0.16 S cm⁻¹ at 1160 K.     

Influence of nano-structure on electrolytic properties in CeO2 based system

Doped ceria (CeO₂) compounds are fluorite type oxides that show oxygen ionic conductivity higher than yttria stabilized zirconia, in oxidizing atmosphere. In order to improve the conductivity, the effective index was suggested to maximize the oxygen ionic conductivity in doped CeO₂ based oxides. In addition, the true microstructure of doped CeO₂ was observed at atomic scale for conclusion of conduction mechanism. Doped CeO₂ had small domains (10-50 nm) with ordered structure in a grain. It is found that the electrolytic properties strongly depended on the nano-structural feature at atomic scale in doped CeO₂ electrolyte. This revised version was published online in August 2006 with corrections to the Cover Date.     

A coupled electron diffraction and rigid unit mode (RUM) study of the crystal chemistry of some zeotypic AlPO4 compounds

Electron diffraction and lattice dynamical calculations are used to investigate the unit cells, space group symmetries and inherent displacive flexibility of the room-temperature average structures of AlPO₄-8, AlPO₄-16 and AlPO₄-tridymite. The zero-frequency rigid unit modes (RUMs) of the idealized high-symmetry polymorphs thereof are also investigated along with their relationship to the lower-temperature polymorphism of these zeotypic aluminophosphates. The clear presence of satellite reflections in addition to the Bragg reflections (G) of the underlying Cmc2₁ parent structure in the case of AlPO₄-8 shows that the true unit cell of the room-temperature polymorph has a doubled c-axis due to a condensed RUM mode. Structured diffuse scattering is also observed which can be related to the thermal excitation of RUM modes. In the case of AlPO₄-tridymite, a complex F1 triclinic polymorph is observed and related to soft RUM modes while, in the case of AlPO₄-16, a soft q=0 RUM mode is shown to be responsible for an observed phase transition in the case of the all SiO₂ analogue of AlPO₄-16. A large number of additional zero-frequency RUM modes also exist in the case of AlPO₄-16.     

The Influence of Sulfate‐Doping on the Nature of V Sites in VOx/TiO2 Catalysts

EPR, UV/Vis and FTIR spectroscopy as well as thermal analysis (TA/MS) were applied to study the influence of sulfate species present in the anatase support on the specific nature of VO_x species in supported VO_x/TiO₂ catalysts. Those sulfate species modify the local structure of the supported vanadyl species and lead to the formation of two types of VO²⁺ sites instead of only one type being formed on sulfate‐free anatase. EPR and FTIR spectroscopic measurements revealed that a part of the VO²⁺ species are directly bound to the surface sulfate species. By TA/MS it was found that SO₂ is released at lower temperature from VO_x/TiO₂ in comparison to the vanadium‐free support. The direct bonding between sulfate and VO_x species stabilizes the latter on the surface of VO_x/TiO₂ resulting in three effects: 1) a higher V site dispersion in comparison to sulfate‐free TiO₂, 2) a better resistance of surface vanadyls against diffusion into the bulk of the support and 3) a much faster reoxidation of reduced V sites than observed on sulfate‐free TiO₂.     

Diffuse scattering of modulated structures and quasicrystals

The method of Fourier transforms is applied to the calculation of sharp (coherent) and diffuse (incoherent) scattering of modulated structures and quasicrystals. It is shown that the fundamental difference between both may best be described by introducing different distribution functions of atoms, before applying modulations of the structure.     

Hydrogenation of acetylene into ethane–ethene mixtures over modified Pd–alumina catalysts

1. Download : Download high-res image (138KB)
2. Download : Download full-size image

     

An efficient meshfree point collocation moving least squares method to solve the interface problems with nonhomogeneous jump conditions

We are going to study a simple and effective method for the numerical solution of the closed interface boundary value problem with both discontinuities in the solution and its derivatives. It uses a strong‐form meshfree method based on the moving least squares (MLS) approximation. In this method, for the solution of elliptic equation, the second‐order derivatives of the shape functions are needed in constructing the global stiffness matrix. It is well‐known that the calculation of full derivatives of the MLS approximation, especially in high dimensions, is quite costly. In the current work, we apply the diffuse derivatives using an efficient technique. In this technique, we calculate the higher‐order derivatives using the approximation of lower‐order derivatives, instead of calculating directly derivatives. This technique can improve the accuracy of meshfree point collocation method for interface problems with nonhomogeneous jump conditions and can efficiently estimate diffuse derivatives of second‐ and higher‐orders using only linear basis functions. To introduce the appropriate discontinuous shape functions in the vicinity of interface, we choose the visibility criterion method that modifies the support of weight function in MLS approximation and leads to an efficient computational procedure for the solution of closed interface problems. The proposed method is applied for elliptic and biharmonic interface problems. For the biharmonic equation, we use a mixed scheme, which replaces this equation by a coupled elliptic system. Also the application of the present method to elasticity equation with discontinuities in the coefficients across a closed interface has been provided. Representative numerical examples demonstrate the accuracy and robustness of the proposed methodology for the closed interface problems. © 2014 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 31: 1031–1053, 2015     

乙二醇溶剂热合成的CeO2的可逆氧化还原性及CO2捕获性能

利用乙二醇的还原性,采用乙二醇溶剂热法制备了表面具有丰富氧空穴的CeO₂-GST纳米晶,对其进行了X射线衍射、透射电镜、X射线光电子能谱、原位H₂还原-O₂氧化循环和CO₂原位红外漫反射表征,并研究了其可逆氧化还原性及CO₂捕获性能. 结果表明,与CeO₂-nanorod和柠檬酸溶胶法合成的CeO₂-CA样品相比,CeO₂-GST纳米晶具有最好的可逆氧化还原性能和循环稳定性,同时在50 ℃下具有最好的CO₂吸附性能（149 μmol/g）. 利用原位红外漫反射光谱研究了CO₂在还原CeO₂表面的吸附情况,发现CO₂主要以双齿碳酸盐和桥连碳酸盐两种形式吸附在CeO₂表面,其中桥连碳酸盐物种不稳定,He吹扫可脱附. 此外,CO₂在CeO₂-nanorod上还会生成稳定的甲酸盐和单齿碳酸盐物种.