Half-zirconocene anilide complexes: synthesis, characterization and catalytic properties for ethylene polymerization and copolymerization with 1-hexene

A number of half-zirconocene anilide complexes of the type Cp*ZrCl(2)[N(2,6-R(1)(2)C(6)H(3))R(2)] [R(1) = (i)Pr (1, 3), Me (2); R(2) = Me (1, 2), Bn (3)] and Cp*ZrCl[N(2,6-Me(2)C(6)H(3))Me](2) (4) (Cp* = pentamethylcyclopentadienyl) were synthesized from the reactions of Cp*ZrCl(3) with the lithium salts of the corresponding anilide in diethyl ether at room temperature. All new zirconium complexes were characterized by (1)H and (13)C NMR and elemental analysis. Molecular structures of complexes 1, 2 and 4 were determined by single crystal X-ray diffraction analysis. Upon activation with Al(i)Bu(3) and Ph(3)CB(C(6)F(5))(4), complexes 1-4 exhibit good catalytic activity for ethylene polymerization, and produce polyethylene with a moderate molecular weight. Among these zirconium complexes, complex 1 shows the highest catalytic activity while complex 4 shows the lowest catalytic activity for ethylene polymerization. Complexes 1-3 also exhibit moderate catalytic activity for copolymerization of ethylene with 1-hexene, and produce copolymers with relatively high molecular weight and reasonable 1-hexene incorporation. In addition, the activation procedure of these catalyst systems were studied by (1)H NMR spectroscopy.     

Construction of a sp3/sp2 Carbon Interface in 3D N‐Doped Nanocarbons for the Oxygen Reduction Reaction

The development of highly efficient metal‐free carbon electrocatalysts for the oxygen reduction reaction (ORR) is one very promising strategy for the exploitation and commercialization of renewable and clean energy, but this still remains a significant challenge. Herein, we demonstrate a facile approach to prepare three‐dimensional (3D) N‐doped carbon with a sp³/sp² carbon interface derived from ionic liquids via a simple pyrolysis process. The tunable hybrid sp³ and sp² carbon composition and pore structures stem from the transformation of ionic liquids to polymerized organics and introduction of a Co metal salt. Through tuning both composition and pores, the 3D N‐doped nanocarbon with a high sp³/sp² carbon ratio on the surface exhibits a superior electrocatalytic performance for the ORR compared to that of the commercial Pt/C in Zn–air batteries. Density functional theory calculations suggest that the improved ORR performance can be ascribed to the existence of N dopants at the sp³/sp² carbon interface, which can lower the theoretical overpotential of the ORR.     

HIV-1整合酶链转移抑制剂的3D-QSAR、分子对接和分子动力学模拟研究

为了获得高活性、结构新颖的整合酶链转移(INST)抑制剂,本文采用Co MFA和Co MSIA两种方法对32个萘啶类INST抑制剂进行了三维定量构效关系研究,并建立了相关模型,其交叉验证系数分别为q~2=0. 809和q~2=0. 816,拟合验证系数分别为r~2=0. 998和r~2=0. 981,表明所建立的模型是可靠的且具有一定的预测能力。利用分子对接探讨小分子化合物与INST蛋白的相互作用模式,结果表明,萘啶类化合物主要通过疏水作用和氢键作用与INSTIs蛋白结合。最后通过分子动力学模拟进一步验证对接结果发现,对接的结合模式与分子动力学模拟得到的结果是一致的。本研究获得的综合模型和推论可以为开发有效的HIV INSTIs提供重要的理论信息。     

Synthesis of new substituted benzaldazine derivatives,hydrogen bonding-induced supramolecular structures and luminescent properties

Syntheses of three benzaldazine compounds 1–3 with the general formula Ar₁(CH = N–N = HC)Ar₂ (Ar₁ = Ar₂ = 2-OH-3,5-^tBu₂C₆H₂ (1), Ar₁ = Ar₂ = 2-BrC₆H₄ (2), Ar₁ = ortho-C₆H₄(NHC₆H₃-Me₂-2,6), Ar₂ = C₆H₄F-2 (3)) are described. All compounds were characterized by elemental analysis, ¹H NMR, ¹³C NMR, IR spectroscopy and single-crystal X-ray crystallography. The different supramolecular structures were obtained through different weak interactions (C ? H···O, O ? H···N and π···π interactions for 1; C ? H···Br and Br···Br interactions for 2; C ? H···F and C ? H···N interactions for 3). Compound 1 shows solvent-dependent fluorescent properties with blue to green emission on the increasing of the solvent polarity. Compounds 2, 3 show blue photoluminescence in different solvents.     

Chromium complexes supported by phenanthrene-imine derivative ligands: synthesis, characterization and catalysis on isoprene cis-1,4 polymerization

Reactions of CrCl(2)(THF)(2) with N-aryl-9,10-iminophenanthraquinone in CH(2)Cl(2) give the monoimine chromium complexes (Ar)IPQCrCl(2)(THF)(2) (1, Ar = 2,6-Me(2)C(6)H(3); 2, Ar = 2,6-Et(2)C(6)H(3); 3, Ar = 2,6-(i)Pr(2)C(6)H(3)). Molecular structures of 1 and 3 were revealed to be monomeric with the chromium atoms in distorted octahedral geometries. Similar reactions of CrCl(2)(THF)(2) with N,N-bis(arylimino)phenanthrene ligands afford the diimine complexes (Ar1,Ar2)BIPCrCl(μ-Cl)(3)Cr(THF)(Ar1,Ar2)BIP (4, Ar(1) = Ar(2) = 2,6-Me(2)C(6)H(3); 5, Ar(1) = Ar(2) = 2,6-Et(2)C(6)H(3); 6, Ar(1) = Ar(2) = 2,6-(i)Pr(2)C(6)H(3); 7, Ar(1) = 2,6-Me(2)C(6)H(3), Ar(2) = 2,6-(i)Pr(2)C(6)H(3)). The X-ray diffraction analysis shows that 4, 5, and 7 are chlorine-bridged dimers with each chromium atom in a distorted octahedral geometry. Upon activation with MAO, all these complexes exhibit good catalytic activities for isoprene polymerization affording polyisoprene with predominantly a cis-1,4 unit.     

Synthesis and structures of (R)-cyclopentadienyl-binaphthoxy titanium(IV) complexes and catalytic properties for olefin polymerization

Two new chiral pre-ligands, (R)-3,3'-bis(tetramethylcyclopentadienyl)-2,2'-bismethoxy-1,1'-bisnaphthalene (1) and (R)-3-tetramethylcyclopentadienyl-2,2'-bismethoxy-1,1'-bisnaphthalene (2), were synthesized by reaction of (R)-3,3'-dilithium-2,2'-bismethoxy-1,1'-bisnaphthalene with 2,3,4,5-tetramethyl-2-cyclopentenone at room temperature. Treatment of the pre-ligands 1 and 2 with butyllithium and Me(3)SiCl first, and subsequently with TiCl(4) (2 and 1 equiv for 1 and 2, respectively) afforded a binuclear complex (R)-3,3'-bis[(tetramethylcyclopentadienyl)trichlorotitanium]-2,2'-bismethoxy-1,1'-bisnaphthalene (3) and a mononuclear complex (R)-3-(tetramethylcyclopentadienyl)trichlorotitanium-2,2'-bismethoxy-1,1'-bisnaphthalene (4) in moderate yields. Complexes 3 and 4 were further converted into constrained geometry complexes (R)-1,1'-bis{2,2'-naphthoxy-3,3'-bis[(tetramethylcyclopentadienyl)dibromotitanium]} (5) and (R)-1-(2-naphthoxy)-1'-(2'-naphthol)-3-(tetramethylcyclopentadienyl)dibromotitanium (6) by treatment with BBr(3). The pre-ligands 1 and 2 were characterized by (1)H and (13)C NMR and high resolution mass spectroscopy (HRMS), and the new titanium complexes 3-6 were characterized by (1)H and (13)C NMR and elemental analyses. Molecular structures of 4, 5, and 6 were determined by single-crystal X-ray diffraction analysis. Complexes 4, 5, and 6 all have a pseudo-octahedral coordination environment and adopt a three-legged piano stool geometry around the titanium atom in their solid state structures. When activated with Al(i)Bu(3) and Ph(3)CB(C(6)F(5))(4), the chiral complexes 5 and 6 show moderate catalytic activities for propylene, 1-hexene, and 5-ethylidene-2-norbornene (ENB) polymerization and ethylene/1-hexene copolymerization. The polymers produced by the chiral 5/(i)Bu(3)Al/Ph(3)CB(C(6)F(5))(4) catalyst system from the 1-hexene, and ENB polymerization and ethylene/1-hexene copolymerization with high comonomer contents exhibit optical activity.     

Large ultra-high molecular weight polyethylene spherical particles produced by AlR3 activated half-sandwich chromium(III) catalysts

A series of half-sandwich pentamethylcyclopentadienyl chromium(III) complexes bearing a salicylaldiminato ligand, Cp*[2-R(1)-4-R(2)-6-(CH==NR(3))C(6)H(2)O]CrCl [R(1) = (i)Pr (1, 4), (t)Bu (2, 3, 5), Ad (6); R(2) = H (1, 2, 3), (t)Bu (4, 5, 6); R(3) = (i)Pr (1, 2, 5, 6), (t)Bu (3, 4)], were synthesized. All complexes were characterized by elemental analyses and the structures of complexes 1-4 and 6 were determined by X-ray diffraction analysis. These complexes adopt a pseudo-octahedral coordination environment with a three-legged piano stool geometry. Upon activation with a small amount of AlR(3), complexes 1-6 all catalyze the polymerization of ethylene in a quasi living fashion with good to high catalytic activity under mild conditions and produce ultra-high molecular weight polyethylene as spherical particles with a diameter of 1-6 mm. The catalytic activity of these complexes and the molecular weight of the produced polyethylene can be tuned in a broad range by changing the R(1), R(2), and R(3) groups as well as the AlR(3) cocatalyst. It was found that complex 6 with R(1) = Ad, R(2) = (t)Bu, and R(3) = (i)Pr shows the highest catalytic activity and produces polyethylene with the highest molecular weight.