Short time deposition of TiO2 nanoparticles on SiC as photocatalysts for the degradation of organic dyes

The deposition of TiO₂ nanoparticles on SiC was carried out by mechanical milling under different conditions. SiC–TiO₂ samples were used as photocatalysts for the degradation of organic dyes such as methylene blue and rhodamine B. A short time deposition of TiO₂ nanoparticles was observed during mechanical milling (2 min at 200 rpm) to cover the SiC particles. The presence of SiC and TiO₂ (anatase and rutile) was confirmed by means of X-ray diffraction after thermal treatment at 450 °C. The deposition of TiO₂ on SiC was corroborated by scanning electron microscopy analysis; the thickness of the thin layer of TiO₂ deposited on SiC increases as the proportion of TiO₂ increases. The energy band gap values obtained for these compounds were around 3.0 eV. SiC–TiO₂ photocatalysts prepared by mechanical milling exhibited better activity under UV-light irradiation for the degradation of methylene blue and rhodamine B than commercial TiO₂ powder (titania P25).     

Shear zones and wall slip in the capillary flow of concentrated colloidal suspensions

We image the flow of a nearly random close packed, hard-sphere colloidal suspension (a "paste") in a square capillary using confocal microscopy. The flow consists of a "plug" in the center while shear occurs localized adjacent to the channel walls, reminiscent of yield-stress fluid behavior. However, the observed scaling of the velocity profiles with the flow rate strongly contrasts yield-stress fluid predictions. Instead, the velocity profiles can be captured by a theory of stress fluctuations originally developed for chute flow of dry granular media. We verified this both for smooth and rough walls.     

Amperometric determination of nanomolar mercury(II) by layered double nanocomposite of zinc/aluminium hydroxide-3(4-methoxyphenyl)propionate modified single-walled carbon nanotube paste electrode

Ionics - A mercury(II) sensor was developed by using single-walled carbon nanotube (SWCNT) paste electrode modified with layered double Zn/Al hydroxide-3(4-methoxyphenyl)propionate nanocomposite...     

The Compressibility of pH‐Sensitive Microgels at the Oil–Water Interface: Higher Charge Leads to Less Repulsion

pH‐responsive microgels are unique stabilizers for stimuli‐sensitive emulsions that can be broken on demand by changing the pH value. However, recent experiments have indicated that electrostatic interactions play a different role to that in conventional Pickering emulsions. The influence of charges on the interactions between microgels at the oil–water interface is now described. Compression isotherms of microgels with different charge density and architecture were determined in a Langmuir trough, and counter‐intuitive results were obtained: Charged microgels can be compressed more easily than uncharged microgels. The compressibility of microgels is thus not determined by direct Coulomb repulsion. Instead, the different swelling of the microgels in the charged and the uncharged states is proposed to be the key parameter.     

Preparation of multiwall carbon nanotubes (MWCNTs) stabilised by highly branched hydrocarbon surfactants and dispersed in natural rubber latex nanocomposites

The performance of single-, double- and triple-chain anionic sulphosuccinate surfactants for dispersing multiwall carbon nanotubes (MWNCTs) in natural rubber latex (NR-latex) was studied using a range of techniques, including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and Raman spectroscopy. The conductivities of the nanocomposites were also investigated using four-point probe measurements. Here, MWCNTs were efficiently dispersed in NR-latex with the aid of hyperbranched tri-chain sulphosuccinate anionic surfactants, specifically sodium 1,4-bis(neopentyloxy)-3-(neopentyloxycarbonyl)-1,4-dioxobutane-2-sulphonate (TC14). This paper highlights that TC14 performs much better than that of the commercially available surfactant sodium dodecyl sulphate (SDS), demonstrating how careful consideration of surfactant architecture leads to improved dispersibility of MWCNTs in NR-latex. The results should be of significant interest for improving nanowiring applications suitable for aerospace-based technology.     

The influence of substrate surface roughness on microstrip transmission line loss using conventional analyses and length‐scale fractal analysis

Two components of conductor topography can impact conductor loss for signals in the GHz frequency range: conductor–ceramic interface roughness and conductor edge angle. This study is an experimental investigation of the influence of these conductor topographies on conductor loss in microstrip circuits produced by thick‐film technology. The aluminum nitride ceramic substrates have different surface roughnesses due to different surface finish processes. The substrate surfaces were characterized using conventional and length‐scale fractal analysis. The conductor–ceramic interface was measured with a contact profilometer. The conductor edge angle and conductor edge profile were measured optically. It was found that there is a direct correlation between conductor loss and conductor edge angle, whereas there is an inverse correlation between loss and substrate roughness or relative length of the conductor–ceramic interface. This is the opposite result to the conventional expectation of surface roughness effects on conductor loss. There is also a negative correlation between conductor edge angle and surface roughness or relative length. The loss behavior can be explained by the interaction of the conductor paste with the surfaces during processing. The paste tends to spread more on the smoother surfaces, and thus creates an elongated edge of diminishing cross‐section and a small edge angle. This leads to greater conductor loss. Copyright © 2009 John Wiley & Sons, Ltd.     

Statistical mechanical aspects of a spin- entropy system

In this paper we consider some statistical properties of the entropy due to the time development of a two-level system. Analytic expression for the density matrix is obtained to investigate the influence of the mean photon number on the atomic inversion, field and atomic Wehrl entropies. The results show that the general features of both entropies are similar.     

Synthesis, reactions and biological evaluation of some new naphtho[2,1-b]furan derivatives bearing a pyrazole nucleus

Vilsmeier formylation of 2-(1-phenylhydrazonoethyl)naphtho[2,1-b]furan (2) gave 3-naphtho[2,1-b]furan-2-yl-1-phenyl-1H-pyrazole-4-carbaldehyde (3), which was reacted with C- and N-nucleophiles to afford naphthofuranpyrazol derivatives 4-8. Treatment of 2-[(3-(naphtho[2,1-b]furan-2-yl)-1-phenyl-1H-pyrazol-4-yl)methylene]-malononitrile (4a) with reactants having active hydrogen and Et?N gave the corresponding pyrazoline, pyran and chromene addition product derivatives 10, 12 and 13, consisting of three different connected heterocyclic moieties. Reaction of 1-((3-(naphtho[2,1-b]furan-2-yl)-1-phenyl-1H-pyrazol-4-yl) methylene)-2-phenylhydrazone (6b) with AcONa and ethyl bromoacetate or chloroacetone afforded the thiazolidinone and methylthiazole derivatives 14 and 15, respectively. In addition, intramolecular cyclization of 6d with Ac?O afford the corresponding 1,3,4-thiadiazol-2-yl acetamide derivative 16. The structures of the synthesized compounds were confirmed by IR, 1H-NMR/13C-NMR and mass spectral studies. Compound 14 showed promising effects against the tested Gram positive and negative bacteria and fungi.     

Experiments and simulations of hyperthermal Xe interacting with an ordered 1-decanethiol/Au(111) monolayer: penetration followed by high-energy, directed ejection

A study of the interaction of hyperthermal Xe with a well-ordered standing-up phase of 1-decanethiol adsorbed on Au(111) is presented. Experimentally, double-differential measurements were made of the postcollision Xe kinetic energy as a function of incident and final angles. These experiments are compared to classical trajectory calculations. The results show the two expected channels: direct-inelastic scattering from the surface and accommodated Xe due to trapping-desorption. There is also evidence of a further interaction mechanism. This involves the penetration of the atom deep into the channels between the aligned chains of the monolayer. When the collision energy has been dissipated, the implanted Xe is expelled as the chains return to their equilibrium positions. The expelled Xe leaves the surface with an energy much higher than expected for trapping-desorption, and with an angular-intensity distribution peaked close to the direction of the 1-decanethiol chain orientation. For this reason, we call this new scattering mechanism directed ejection.