AES depth profiling with a tilted sample in front of a cylindrical mirror analyzer: quantification and profile shape changes according to an extension of the conventional MRI model

The influence of the tilt angle of a sample in front of a cylindrical mirror analyzer (CMA) on AES depth profiles is calculated with the conventional mixing‐roughness‐information (MRI) depth model and an extended MRI model. While the conventional model works with an average electron escape depth value, the extended model takes into account the intensity from different segments along the azimuth angle corresponding to different escape depth values before summing up for the total, measured intensity. The deviation between both approaches is generally less than 4%, even for the worst case at 47.7° tilt angle. The shape of the profile is slightly different for both approaches. Because, for a CMA with coaxial gun, the sample tilt angle varies as the electron beam incidence angle, the influence of the latter has to be additionally taken into account for quantification of AES. In reasonable agreement with experimental results it is shown that above 45° the Auger peak intensity of Cu (914 eV) increases up to about a factor of two for an incidence angle of 85°. Copyright © 2006 John Wiley & Sons, Ltd.     

Selective hydrogenation of cinnamaldehyde to cinnamyl alcohol with carbon nanotubes supported Pt-Co catalysts

The Pt-Co catalysts supported on carbon nanotubes (CNTs) have been prepared by wet impregnation and the selective hydrogenation of cinnamaldehyde (CMA) to the corresponding cinnamyl alcohol (CMO) over the catalysts has been studied in ethanol at different reaction conditions. The results show that Pt-0.17 wt%Co/CNTs catalyst exhibits the highest activity and selectivity at a reaction temperature of 60 °C under a pressure of around 2.5 MPa, and 92.4% for the conversion of CMA and 93.6% for the selectivity of CMA to CMO, respectively. The selective hydrogenation for the CO double bond in CMA would be improved as increasing the H₂ pressure, and the selective hydrogenation for the CC double bond in CMA is enhanced as increasing the reaction temperature. In addition, these catalysts have also been characterized using transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), H₂-temperature programmed reduction (H₂-TPR) and H₂-temperature programmed desorption (H₂-TPD) techniques. The results show that Pt particles are dispersed more homogeneously on the outer surface of the nanotubes, while the strong interaction between Pt and Co would improve the increasing of activated hydrogen number because of the hydrogen spillover from reduced Pt⁰ onto CNTs and increase the catalytic activity and selectivity of CMA to CMO.     

Carbon nanotubes supported Pt-Ni catalysts and their properties for the liquid phase hydrogenation of cinnamaldehyde to hydrocinnamaldehyde

The Pt-Ni catalysts supported on CNTs have been prepared by wet impregnation and the selective hydrogenation of cinnamaldehyde (CMA) to the corresponding hydrocinnamaldehyde (HCMA) over the catalysts has been studied in ethanol at different reaction conditions. The results show that Pt-0.34 wt% Ni/CNTs catalyst exhibits the highest activity and selectivity at a reaction temperature of 70 °C under a pressure of around 2.0 MPa, and 98.6% for the conversion of CMA and 88.2% for the selectivity of CMA to HCMA, respectively. The selective hydrogenation for the CC bond in CMA would be improved as increasing the reaction temperature, and the hydrogenation for the CO bond in CMA is enhanced as increasing the H₂ pressure. In addition, these catalysts have also been characterized using TEM-EDS, XPS, H₂-TPR and H₂-TPD techniques. The results show that Pt particles are dispersed more homogeneously on the outer surface of the nanotubes, while the strong interaction between Pt and Ni would improve the increasing of activated hydrogen number because of the hydrogen spillover from reduced Pt⁰ onto CNTs and increase the catalytic activity and selectivity of CMA to HCMA.     

An improvement on constant modulus algorithm for polarization demultiplexing in optical coherent receivers

In order to solve the problem of ill-convergence for constant modulus algorithm (CMA) in polarization division multiplexing system with optical coherent receivers, a modified CMA based on bit error rate (BER) aiding to control initial tap setup, named as BER-Aiding CMA (BA-CMA), is proposed in this paper. By analyzing the principle of CMA for adaptive digital equalization and polarization demultiplexing, the convergence behavior that leads to undesirable result is evaluated and therefore BA-CMA is proposed. Simulation results show that the proposed algorithm is able to overcome the undesirable convergence effectively and keep inherent advantages of CMA at the same time.     

Lagrange神经网络在盲多用户检测中的应用

利用Lagrange神经网络的基本原理,在线性约束恒模算法(LCCMA)基础上,通过增加约束条件,提出了一种多约束Lagrange神经网络恒模"盲多用户检测"算法.通过仿真实验表明,算法比传统最陡下降恒模算法(SDCMA)在误码率等方面有所改善.     

Different chromatin fractions of tomato (Solanum lycopersicum L.) and related species

Conventional chromosome staining has suggested that more than 75% of the tomato chromosomes are constituted by heterochromatin. In order to determine whether more deeply stained proximal regions are classic heterochromatin, the distributions of C-bands and chromomycin A₃ (CMA) bands, and the prophase condensation patterns, were analysed in tomato. In this and most other species of the tomato clade, the 5S and 45S rDNA sites were also localised. In tomato, CMA banding was similar to C-banding. After conventional staining, all species displayed large condensed heteropycnotic regions that did not correspond to C-bands or CMA bands. Analyses of the CMA banded karyotypes revealed a low heterochromatin content. Around 12–17% of the chromatin of tomato was CMA⁺ and 1/4 to 1/5 of this heterochromatin corresponded to 45S rDNA. In other species, the CMA⁺ heterochromatin showed extensive variation (8–35%), but was never near the values found in the literature for tomato. These data suggest the existence of three principal fractions of chromatin in tomato and related species: the late condensed euchromatin corresponding to the terminal regions of the chromosomes, the precocious condensed euchromatin that occupies the major part of the chromosomes and the constitutive heterochromatin that represents those regions revealed by C-bands.