Thermodynamic derivative properties and densities for hyperbaric gas condensates: SRK equation of state predictions versus Monte Carlo data

The ability of Soave–Redlich–Kwong cubic equation of state (SRK EoS) to predict densities and thermodynamic derivative properties such as thermal expansivity, isothermal compressibility, calorific capacity, and Joule–Thompson coefficients, for two gas condensates over a wide range of pressures (up to 110 MPa) was studied. The predictions of the EoS were compared to Monte Carlo simulation data obtained by Lagache et al. [M.H. Lagache, P. Ungerer, A. Boutin, Fluid Phase Equilibr. 220 (2004) 221]. Two completely different alpha functions for the SRK EoS attractive term were used and their respective effects on the predictions of such properties were analyzed. Also, two different forms of the crossed terms of the attractive parameter, a_ij, and three expressions of the crossed terms of the repulsive parameter, b_ij, were combined in different ways, and predictions were carried out. Little sensitivity of the properties on the chosen alpha function, except for the calorific capacities, was found in the systems studied. The most commonly used combination rules to model phase behavior of reservoir fluids, i.e. geometric and arithmetic forms of a_ij and b_ij, respectively, predicted very deficient results for these fluids at extreme conditions, specially for density calculations.     

Optimization of in-vacuo template-stripped Pt surfaces via UHV STM

A recently demonstrated [1] in-vacuo template-stripping process is applied to the study of platinum films stripped from ultra-flat silicon-oxide surfaces. Template-stripped (TS) Pt surfaces, prepared with a range of post-deposition annealing times prior to being stripped from the templating surface in an ultra-high vacuum (UHV) environment, are examined by UHV scanning tunneling microscopy (STM). These studies reveal that without post-deposition annealing, TS Pt surfaces are largely made up of poorly-ordered, granular nanostructures undesirable for many applications. The post-deposition annealing treatments explored in the study result in the emergence and continuous growth of large smooth crystallites. Issues with crystallite orientation relative to the TS surface and artefacts arising as a result of the epoxy used in the template-stripping process are presented and discussed in relation to optimizing the template-stripping procedure for specific applications such as self-assembled monolayer (SAM) formation for molecular electronics. PACS 68.37.Ef; 68.47.De; 68.55.Jk; 81.05.Bx; 81.15.Ef     

Long-term optimal operation of series parallel reservoirs for critical period with specified monthly generation and average monthly storage

We present in this paper an efficient approach for solving the problem of planning the long-term (multiyear) operation of a multireservoir hydroelectric power system for the critical period with a monthly variable load. This load is equal to a certain percentage of the total generation at the end of the year, subject to satisfying a number of constraints on the hydrosystem, using the minimum norm formulation.The proposed method is efficient in computing time and in calculating the total expected benefits from the system during the critical period. Numerical results are reported for a real system in operation consisting of two rivers. Each river has two series reservoirs.This work was supported by the Natural Science and Engineering Research Council of Canada, Grant No. A4146.     

Rail vs truck transport of biomass

This study analyzes the economics of transshipping biomass from truck to train in a North American setting. Transshipment will only be economic when the cost per unit distance of a second transportation mode is less than the original mode. There is an optimum number of transshipment terminals which is related to biomass yield. Transshipment incurs incremental fixed costs, and hence there is a minimum shipping distance for rail transport above which lower costs/km offset the incremental fixed costs. For transport by dedicated unit train with an optimum number of terminals, the minimum economic rail shipping distance for straw is 170 km, and for boreal forest harvest residue wood chips is 145 km. The minimum economic shipping distance for straw exceeds the biomass draw distance for economically sized centrally located power plants, and hence the prospects for rail transport are limited to cases in which traffic congestion from truck transport would otherwise preclude project development. Ideally, wood chip transport costs would be lowered by rail transshipment for an economically sized centrally located power plant, but in a specific case in Alberta, Canada, the layout of existing rail lines precludes a centrally located plant supplied by rail, whereas a more versatile road system enables it by truck. Hence for wood chips as well as straw the economic incentive for rail transport to centrally located processing plants is limited. Rail transshipment may still be preferred in cases in which road congestion precludes truck delivery, for example as result of community objections.     

Analysis of a type of nonsmooth dynamical systems

In this paper, a class of nonsmooth dynamical systems is analyzed. Extensive simulations reveal the chaotic behavior in these systems. By introducing a parameter, a chain of systems with one end being a linear stable system and the other being a chaotic system is constructed. Then the phase transition process through the chain is investigated as the parameter varies. Difficulties involved in analyzing this class of systems are also discussed.     

New Non-Linear Inequalities for Flag-Vectors of 4-Polytopes

In this paper we prove four new (infinite) lists of quadratic inequalities, and four cubic inequalities, for the flag f-vectors of 4-polytopes. These extend and supplement the only four currently known non-linear inequalities, which were proved by Bayer in 1987. The new lists of inequalities for flag f-vectors yield new lists of inequalities for f-vectors of 4-polytopes. Using the latter, we managed to improve an estimate discovered by Hoppner and Ziegler concerning upper bounds of f₁ in terms of f₀ and f₃.     

Nonlocality of Reaction-Diffusion Equations Induced by Delay: Biological Modeling and Nonlinear Dynamics

We present a short survey on the biological modeling, dynamics analysis, and numerical simulation of nonlocal spatial effects, induced by time delays, in diffusion models for a single species confined to either a finite or an infinite domain. The nonlocality, a weighted average in space, arises when account is taken of the fact that individuals have been at different points in space at previous times. We discuss and compare two existing approaches to correctly derive the spatial averaging kernels, and we summarize some of the recent developments in both qualitative and numerical analysis of the nonlinear dynamics, including the existence, uniqueness (up to a translation), and stability of traveling wave fronts and periodic spatio-temporal patterns of the model equations in unbounded domains and the linear stability, boundedness, global convergence of solutions and bifurcations of the model equations in finite domains.     

Jackson-type inequality on the sphere

In a recent paper, I introduced new moduli of smoothness for functions on the sphere which did not use averages and, as a result, had some interesting properties. The direct, Jackson-type, estimate of the best approximation by spherical harmonics using the new moduli will be proved here. Equivalence with the appropriate K-functionals will be given. Relations with the moduli used earlier will be shown and used to prove new results for these moduli.     

Point load determination of static elastic moduli using laser speckle interferometry

Electronic speckle interferometry (ESPI) is used to determine the Young's modulus E and Poisson ratio ν of an isotropic material. Micron scale deformations of the surface of the block of polymethyl-methacrylate (PMMA) are induced by normal application of a known near-point force. These deformations are recorded in speckle interferometric fringe patterns. An iterative minimum error inversion technique is developed to obtain the elastic properties from the positions of fringe peaks and troughs observed in the fringe patterns. Sensitivity tests of the method on calculated fringe patterns using measured experimental uncertainties suggest the technique will provide measures of the elastic moduli to better than 5%. In an experimental test on a bloc of PMMA (acrylic) the technique gave values of E and ν that differed from corresponding measures obtained using more conventional strain-gauge methods by less than 4%.     

Existence of solutions for the time-dependent thermistor equations

The equations describing the behaviour of temperature/flow microsensorsemploy-ing polysilicon thermistors form a degenerate nonlinearparabolic system. One special feature is that different equationsof this system are to be satisfied on different domains. Bymeans of supersolutions and subsolutions, the maximum principle,and fixed point arguments, the authors show the existence ofsolutions to the equations.