Deposition of Hydrogen-Free Silicon Nitride Thin Films by Microwave ECR plasma Enhanced Magnetron Sputtering at Room Temperature

Hydrogen-free silicon nitride （SiNx） films were deposited at room temperature by microwave electron cyclotron resonance （MW-ECR） plasma enhanced unbalance magnetron sputtering system. Both Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy are used to study the bonding type and the change of bonding structures of the silicon nitride films. The results indicate that the chemical structure and composition of SiNx films deposited by this technique depend strongly on the N2 flow rates, the stoichiometric SiNx film, which has the highest hardness of 22.9 GPa, could be obtained at lower N2 flow rate of 4 sccm.     

应用分子筛精制氩气

氩是一种与任何物质都不起作用的惰性气体。由于它具有这一特点,近代在各种工业与科学领域中应用日广,其中特别是对于金属的提炼与精制加工过程,如锑的高温精炼、高纯度金属及半导体的制备等都需要用到氩气。应该指出的是,这些过程不仅需要氩,而且需要纯度极高的氩,因为即使含有极微量的氧与氮,也将影响加工物品的质量与性能。     

非含氟型磺化聚合物质子交换膜材料的研究进展(下)

概述了近十年来非含氟型磺化聚合物质子交换膜材料的研究进展,包括各种材料的制备和性质,详细地讨论了材料的化学结构、形态与其性能(质子导电率、耐水性、尺寸稳定性、吸水率、抗自由基氧化性、甲醇透过率等)之间的关系,其中结合作者在磺化聚酰亚胺方面的研究工作,重点对这类材料进行了系统、深入的介绍和讨论.最后,本文还对今后燃料电池用质子交换膜材料的研究提出了一些设想和展望.本文分为上下两篇,其中下篇主要综述了非含氟型磺化聚合物的性能与结构形态之间的关系.     

Promise of commercialization: Carbon materials for low-cost perovskite solar cells

Perovskite solar cells(PVSCs) have attracted extensive studies due to their high power conversion efficiency(PCE)with low-cost in both raw material and processes. However, there remain obstacles that hinder the way to their commercialization. Among many drawbacks in PVSCs, we note the problems brought by the use of noble metal counter electrodes(CEs) such as gold and silver. The costly Au and Ag need high energy-consumption thermal evaporation process which can be made only with expensive evaporation equipment under vacuum. All the factors elevate the threshold of PVSCs' commercialization. Carbon material, on the other hand, is a readily available electrode candidate for the application as CE in the PVSCs. In this review, endeavors on PVSCs with low-cost carbon materials will be comprehensively discussed based on different device structures and carbon compositions. We believe that the PVSCs with carbon-based CE hold the promise of commercialization of this new technology.     

电极电势:从电化学势说起*

对于原电池,电极电势的本质是化学体系对电极材料上电子势能的影响,其正负极电势差反映化学能向电能转化的趋势。电极界面上化学物质的氧化/还原反应是通过何种途径影响到电极上电子势能的,现有的教材和论著没有给出明确的解释。本文基于相间电化学势平衡原则阐明了固液界面上离子平衡与电极上电子电势的关系,并由此给出了标准电势的物理含义:它是构成电极体系一系列物性参数的组合,包括被测电极的电子、离子化学势,工作电极电解液的离子化学势,参比电极的电子、离子化学势和参比电极电解液的离子化学势等。     

含各向异性左手材料的一维Thue-Mores准周期结构的反射带隙

采用传输矩阵法,研究了由各向同性右手材料和各向异性左手材料组成的Thue-Morse准周期结构的反射带隙,分析了入射角、偏振和晶格比例缩放因子对反射带隙的影响.结果表明该结构存在一个全方向反射带隙,该带隙的宽度由TE模的低频带边缘和TM模的高频带边缘决定.当在该结构中插入一层缺陷时,在全方向带隙中出现一条缺陷模.对TE模,缺陷模的位置受入射角的影响很弱,而对TM模,缺陷模的位置随入射角的增大,向高频方向移动.     

静电纺丝素/胶原/聚合物复合纤维的制备及其力学性能的研究

目前,将天然高分子蛋白和聚合物共混利用静电纺丝法制作各种组织工程支架材料倍受关注。基于这种研究背景,在本文中利用静电纺丝技术,制备了丝素(SF)/胶原(COL)/聚左旋乳酸(PLLA)和SF/COL/聚左旋乳酸-己内酯(PLCL)两种共混复合纤维膜,通过扫描电镜(SEM)对纤维形态结构分析,发现复合纤维形貌良好,直径较为均一。同时改变纺丝液中高分子蛋白的比例,复合纤维的直径也随之减小。此外,对复合纤维进行了力学性能测试,发现随着聚合物含量的增加,复合纤维膜的力学性能得以改善,SF/COL/PLCL组复合纤维的拉伸性能明显优于SF/COL/PLLA组。     

SAPO系磷铝分子筛的晶化及其复合催化剂对CO加氢的影响

探索了机械搅拌、配料组成、晶化参数等因素对SAPO-34和SAPO-5磷铝分子筛水热合成的影响,考察了混粒（颗粒混合）工艺和研粉（粉体研磨）工艺对“磷铝分子筛/尖晶石”复合催化剂制备的影响。与SAPO-34分子筛相比,SAPO-5分子筛晶体对机械作用的耐受性较强。用XRD、N2物理吸附、FESEM、EDS研究了材料的结构和织构特征。对比了四种复合催化剂的CO催化加氢性能。能够使复合催化剂更能抑制C–C偶合、从而更富产低碳烃的物相次序为：SAPO-34 > SAPO-5 > “ZnAlCrO4”尖晶石相。能够使复合催化剂具有更高CO加氢活性（即CO转化率）的物相次序为：“ZnAlCrO4”尖晶石相 > SAPO-34 > SAPO-5。     

菠萝蛋白酶催化合成寡聚L-酪氨酸

以菠萝蛋白酶为催化剂从L-酪氨酸甲酯聚合得到寡聚L-酪氨酸(O-L-Try)。 以0.8 U/mL蛋白酶在体积分数为7.5%的二甲亚砜(DMSO)缓冲液(pH=7.5,0.2 mol/L)中催化0.23 g/mL L-酪氨酸甲酯在50 ℃下聚合反应5 h后,O-L-Try产率达到65%。 通过基质辅助激光解吸电离飞行时间质谱(MALDI-TOF-MS)、氢核磁共振波谱仪(¹H NMR)、拉曼光谱、傅里叶变换红外光谱仪(FTIR)等技术手段表征了O-L-Try结构和性能特征。 结果表明,MALDI-TOF-MS测定的O-L-Try的聚合度主要为10。 ¹H NMR谱图分析得到的O-L-Try的平均聚合度为8。 拉曼光谱显示,O-L-Try的肽键特征峰位于1623 cm^-1(酰胺Ⅰ带)、1447 cm^-1(酰胺Ⅱ带)、1270 cm^-1(酰胺Ⅲ带)和648 cm^-1(酰胺Ⅳ带)。     

Merging and splitting dynamics between two bright solitons in dipolar Bose-Einstein condensates

We numerically study the interaction dynamics of two bright solitons with zero initial velocities in the one-dimensional dipolar Bose-Einstein condensates. Under different dipolar strengths, the two bright solitons can merge into a breathing wave, and then split or propagate constantly after several oscillating periods. We quantitatively study the breathing frequency of wave after merging and the asymmetry property of solitons after splitting, and analyze their formation mechanism by the system's energy evolution. Also, the change of initial phase difference brings distinct effects on the soliton interaction. Our results provide insight into the new dynamical phenomena in dipolar systems and enrich the understanding for interaction between dipolar solitons.