Fast Liquid Phase Epitaxial Growth for Perovskite Single Crystals

Semiconductors grown by the solution-processed method have shown low-cost,facile fabrication process and comparable performance.However,there are many reasons why it is difficult to achieve high quality films.For example,lattice constant mismatch is one of the problems when photovoltaic devices made of organ metallic perovskites.In this work,MAPbBr^{MA=CH3NH3^+}perovskites single crystals grown on the surface of MAPbBr2.5 CI0.5 perovskites single crystals via liquid epitaxial growth method is demonstrated.It is found that when the lattice constants of the two perovskite single crystals are matched,another crystal can be grown on the surface of one crystal by epitaxial growth.The whole epitaxy growth process does not require high heating temperature and long heating time.X-ray diffraction method is used to prove the lattice plane of the substrate and the epitaxial grown layer.A scanning electron microscope is used to measure the thickness of the epitaxial layer.Compared with perovskite-based photodetectors without epitaxial growth layer,perovskite-based photodetectors with epitaxial growth layer have lower dark current density and higher optical responsibility.     

Effect of Hydrogen Implantation on SIMOX SOI Materials

Hydrogen ions were implanted into separation by implantation of oxygen (SIMOX) silicon-on-insulator (SOI) wafers near the oxygen-implantation-induced damage peak under different conditions of energy and dose. It was found that the implanted hydrogen ions not only accelerate the diffusion of oxygen atoms from the annealing ambience into the wafer but also cause an outward diffusion of oxygen atoms in the buried oxide (BOX) layer. Thus, greatly broadened buried oxygen-rich (BOR) layers were formed in our experiments, which are 18%-79% broader than the BOX layer of standard SIMOX SOI wafers under the same conditions of oxygen implantation. The mechanism was discussed. A potential low cost method to fabricate SIMOX SOI wafers is proposed.     

苯磺酰苯胺类药物理化性能的研究

利用高效液相色谱和分光光度法，研究了新合成的5个苯磺酰苯胺类化合物的酸离解常数和脂溶性，结果表明，他们具有较弱的酸性和合适的脂溶性。预计会有较好的抗肝片吸虫活性。     

EXISTENCE OF GLOBAL SMOOTH SOLUTION FOR SCALAR CONSERVATION LAWS WITH DEGENERATE VISCOSITY IN 2-DIMENSIONAL SPACE

This article concerns the existence of global smooth solution for scalar conservation laws with degenerate viscosity in 2-dimensional space. The analysis is based on successive approximation and maximum principle.     

BaZrxTi1-xO3·yLa2O3固溶体的合成、结构与性能

在100℃以下用软化学合成方法制备了一系列BaZrxTi1-xO3·yLa2O3O(0≤x≤0.3,0≤y≤0.04)固溶体纳米粉末.XRD物相分析及d-间隔-组成图证明,产品为完全互溶取代固溶体.从TEM谱图观察,粒子为均匀球形,平均粒径60nm.通过制陶实验对该系列固溶体的介电特性进行了测试,结果表明,采用化学掺杂方法在BaTiO3中掺入适量锆和镧后,样品的室温介电常数可提高20倍.     

N—（3—二茂铁乙酰胺基）丙基吡咯聚合物修饰的葡萄糖电极的研究

于铂电极上修饰一层Ｎ－（３－二茂铁乙酰胺基）丙基吡咯聚合物膜，应用循环伏安法对聚合物的电化学性能进行研究，发现了Ｎ－位取代吡咯聚合物的电活性大大降低，聚合物中 二茂铁基团氧化还原性能稳定，制成酶电极后，在＋０．２Ｖ以葡萄糖有一明显的催化峰，而对抗坏血酸，尿酸则几乎没有呼应，该葡萄糖电极性能稳定，连续工作十天，响应值基本不变。     

具有超大通道结构的介孔氧化硅柱层状钛酸的合成和催化应用初探

A mesoporous (d=2.3mm) silica-pillared layered tetratitanate with a super gallery (d₀₀₁=1.84mm)was prepared by first preswelling layered tetratitanate with n-dodecyl amine, then reacting with 20wt% NH₂(CH₂)₃Si(OC₂H₅)₃ aqueous solution, and finally calcinating the resultant solid product in air at 550℃. All the reaction was carried out hydrothermally in an autoclave at 130℃. The obtained material has a relatively high BET surface area of 204m²·g^-1 and a thermal stability beyond 600℃. The catalytic application of the material was also investigated by using the dehydration of isopropanol and the reform of n-hexane as two probing reactions.     

端羟基芳香酯二醇扩链的聚氨酯－酯的DSC研究

端羟基芳香酯二醇扩链的聚氨酯－酯的ＤＳＣ研究陈静，余学海，杨昌正（南京化工学院应化系南京２１０００９）（南京大学化学系南京２１００９３）关键词嵌段聚醚聚氨酯－酯，结晶性，微观相结构，差示扫描量热法，形态结构众所周知，聚氨酯嵌段共聚物是一类结构特殊、用...     

新型手性氨基醇的合成及其用于不对称催化醛类烷基化反应

制备了一种由糖类化合物衍生的新型手性氨基醇（Ⅰ），并将其作为手性源用于醛类的不对称烷基化反应．考察了在手性氨基醇的存在下，各种醛和二乙基锌作用生成相应的手性仲醇的光学收率及化学收率．结果表明，该催化剂对于芳香醛的烷基化更为有效．并考察了几种反应条件对于苯甲醛的不对称催化烷基化反应的影响，其中最佳结果为１－苯基－１－丙醇的光学收率达８２．７％，而化学收率达５８．８％．