Bi-2223/Ag异质结的光生电压效应研究

在50 ～ 340 K不同温度下,利用紫色激光(λ=405 nm)对银/铋锶钙铜氧2223异质结界面进行辐照,观测到明显的光生电压效应,发现光生电压的极性分别在超导转变温度TC与320 K附近发生了反转,排除了激光产生的热电势是产生光生电压的原因,分析表明银/铋锶钙铜氧2223异质结界面处存在内建电场:光生电压由异质结界面处的内建电场分离光生电子-空穴对产生的.超导转变温度TC之下以及320 K以上,内建电场方向从超导体指向金属电极;超导转变温度TC与反向温度320 K之间,内建电场从金属指向超导体.     

液体变焦透镜简介

 关于电化毛细管作用的研究始于1875年,李普曼(G.Lippmann)在当时用相关理论来解释对浸在电解液中的水银滴表面施加电压时其形状发生变化这种现象。弗洛姆金(A.Froumkine)用同样的原理解释了电解液体表面的净电荷会改变其与金属表面张角的现象,也就是所谓的电湿润过程。最近,一个巧妙的实验更加形象地展示了这种过程,从而将其应用进行了推广,并使用水银液滴对传感器和光学开关进行了测试。     

合肥光源高亮度模式Lattice设计

介绍了一组合肥光源新高亮度模式的Lattice. 新的设计维持了储存环上所有元件和光束线位置不变,也没有加入新的元件. 取得了较低发射度. 所有直线节处的垂直方向β函数值都很小，适合插入件的运行. 跟踪计算表明新Lattice具有足够大的动力学孔径用于注入和储存粒子.     

平面火花隙三电极开关研制及性能测试

 研制了一种适用于平行板传输连接的平面火花隙三电极开关，开关正负电极为半圆形状，触发电极为细条状。将之替代立体式（半球形电极）火花隙三电极开关并应用于爆炸箔起爆装置中，装置回路参数将得以优化。实验测试了空气间隙为4.12， 3.14和2.2 mm的平面火花隙三电极开关的性能。结果表明，在开关间隙间距一定的情况下，随着电压的升高，开关间隙的放电时延和分散时间呈指数降低，开关电感小于15 nH；对于不同范围内的应用电压，使用不同间隙间距的开关，其分散时间不大于10 ns。该开关应用于较低充电电压（小于10 kV）的脉冲功率装置中，与立体式火花隙三电极开关相比，回路电感降低了约50 nH，放电周期缩短近1/3，峰值电流增加约1/3。     

ZnS∶Zn,Pb蓝粉在低压阴极射线激发下的应用

通过对ZnS∶Zn,Pb蓝色荧光粉进行表面包覆SiO2以改善其稳定性;In2O3材料的适量混合,提高了荧光粉的导电性,降低了它的起辉电压。采用沉淀法制备荧光屏,考察了阳极电压和阳极电流对亮度以及衰减过程的影响,实验结果表明ZnS∶Zn,Pb的性能优于ZnS∶Ag,Cl和ZnS∶Zn,可适用于FED等低压显示器。     

低维材料的热导率

一根导热棒 ,如果在它的两端存在温差 ,便会有热量从高温端流向低温端 .这种能量在固体中的传输 ,不是沿着棒按照直线路径完成的 ;其间 ,导热声子将遭遇到频繁的碰撞 ,从而产生热阻 .表征材料导热性能的物理量是热导率κ[单位是W /(m·K) ],而传输的热流密度 jQ(W /m2 )与温度梯度成正比 ,即 jQ=-κdT/dX .如果声子在传输过程中不经历散射 ,则不论导热棒多长 ,jQ 将不依赖于温度梯度 ,而仅仅取决于两端的温差 .引入声子平均自由程l ,经典理论给出 ,κ =(1/3)Cvl,其中C是单位体积材料的热容 ,v是声子的平均速度 .在低温下 ,对于无杂质缺…     

Effect of Ag Doping on Optical and Electrical Properties of ZnO Thin Films

ZnO thin films were prepared on p-type Si (100) substrates by the sol-gel process. The influence of Ag doping at a content of 0.002% on the photoluminescence and current-voltage (I - V) characteristics of ZnO thin films has been investigated. It is found that Ag doping leads to a pronounced increase in the intensity of near band edge emission at 3.23eV and a remarkable red shift of the visible broadband at room temperature. The I - V characteristics of ZnO/p-Si heterojunctions are also changed. These results could be explained by Ag substituting for Zn in Ag doped ZnO thin films.     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

Von Neumann Entropy of an Electron in One-Dimensional Determined Potentials

By using the measure of von Neumann entropy, we numerically investigate quantum entanglement of an electron moving in the one-dimensional Harper model and in the one-dimensional slowly varying potential model. The delocalized and localized eigenstates can be distinguished by von Neumann entropy of the individual eigenstates.There are drastic decreases in von Neumann entropy of the individual eigenstates at mobility edges. In the curve of the spectrum averaged von Neumann entropy as a function of potential parameter λ, a sharp transition exists at the metal-insulator transition point λc = 2. It is found that the von Neumann entropy is a good quantity to reflect localization and metal-insulator transition.     

A Compact Magnetically Insulated Line Oscillator with New-Type Beam Dump

We present a compact improved model of the magnetically insulated line oscillator with new-type beam dump and other novel features. In the experiments, high-power microwave of the TM01 mode is generated from the device with a frequency range of 1.73-1.78 GHz and a peak power level of above 2 GW, when the diode voltage is taken in the range 520-540kV, and the diode current is in the range 58-62kA. This confirms the simulation results.