Standardization of BSE rapid test performances and experiences gathered during the implementation of large-scale testing

The accumulation of pathological prion protein is used as a diagnostic marker for transmissible spongiform encephalopathies. According to European Union (EU) regulations cattle older than 30 months of age (Germany, France, Italy, and Spain by national law >24 months) and slaughtered for human consumption must be tested by using rapid tests for bovine spongiform encephalopathy (BSE). Likewise fallen stock and clinically affected animals must be tested. This article gives a short overview of the incidence of BSE in Europe. The diagnostic hierarchy, i.e., the officially approved methodology for the confirmation of suspect rapid test cases, and the organization of the numerous laboratories involved in this large-scale testing for BSE are described. Special emphasis is given to necessary quality control measures currently in place for BSE rapid testing laboratories and to measures intended to assure a consistent performance of the commercially available rapid test kits.Presented at BERM-9—Ninth International Symposium on Biological and Environmental Reference Materials, 15–19 June 2003, Berlin, Germany.     

Quality assurance for the analytical data of micro elements in food

The micro element content of food is an important quality index due to the action of these elements on human health. In this article, we discuss how to ensure the reliability of analytical data on micro elements in order to truly represent the condition of food. Sampling, treatment of the analytical sample, selection of the analytical method, standard solution, and certified reference material, blank test, calibration of the instrument and equipment, application of the quality control chart, assessment of the final analytical result, and quality assurance system are briefly described. Received: 5 July 2001 Accepted: 19 November 2001     

Effect of Pressure on Fluid Damping in MEMS Torsional Resonators with Flow Ranging from Continuum to Molecular Regime

High quality factor of dynamic structures at micro and nano scale is exploited in various applications of micro electro-mechanical systems (MEMS) and nano electro-mechanical system. The quality factor of such devices can be very high in vacuum. However, when vacuum is not desirable or not possible, the tiny structures must vibrate in air or some other gas at pressure levels that may vary from atmospheric to low vacuum. The interaction of the surrounding fluid with the vibrating structure leads to dissipation, thus bringing down the quality factor. Depending on the ambient fluid pressure or the gap between the vibrating and the fixed structure, the fluid motion can range from continuum flow to molecular flow giving a wide range of dissipation. The relevant fluid flow characteristics are determined by the Knudsen number which is the ratio of the mean free path of the gas molecule to the characteristic flow length of the device. This number is very small for continuum flow and reasonably big for molecular flow. In this paper, we study the effect of fluid pressure on the quality factor by carrying out experiments on a MEMS device that consists of a double gimbaled torsional resonator. Such devices are commonly used in optical cross-connects and switches. We only vary fluid pressure to make the Knudsen number go through the entire range of continuum flow, slip flow, transition flow, and molecular flow. We experimentally determine the quality factor of the torsional resonator at different air pressures ranging from 760 Torr to 0.001 Torr. The variation of this pressure over six orders of magnitude ensures required rarefaction to range over all flow conditions. Finally, we get the variation of quality factor with pressure. The result indicates that the quality factor, Q, follows a power law, Q ∝P ^–r , with different values of the exponent r in different flow regimes. In the second part of the paper, we propose the use of effective viscosity for considering velocity slip conditions in solving Navier–Stokes equation numerically. This concept is validated with analytical results for a simple case and then compared with the experimental results presented in this paper. The study shows that the effective viscosity concept can be used effectively even for the molecular regime if the air-gap to length ratio is sufficiently small (h ₀/L<0.01). As this ratio increases, the range of validity decreases.     

Internal audits in private medical laboratory practice – a Finnish experience in 1996–2000

Internal audits inherently effect quality improvement, and concrete results can be expected by careful planning. As audits should improve the quality system in situ, the development of audits should not be neglected. ISO/IEC 17025 describes the objectives of internal audits and management reviews in more detail compared to the former standards EN 45001 and ISO/IEC Guide 25, although the main features are unchanged. This addresses continuous surveillance of the current practice. A brief questionnaire on vertical audits was distributed to 74 of 120 employees at a Finnish private medical laboratory, Medix Laboratories Ltd. A positive feed-back was received from the current management of audits. However, the study revealed that continuous supervision of audits is needed. Many employees were not willing to perform audits if they had no previous experience. Additionally, audits performed at the workbench were not considered as the best possible for fruitful discussions. Received: 20 February 2001 Accepted: 30 November 2001     

Quality assurance system for a decomposition method as demonstrated for the Wickbold combustion technique

 A five-step model for a quality assurance system is developed for an internal quality control check. It includes the quality control of the decomposition method and the detection method as steps belonging together. The Wickbold combustion technique as decomposition method in combination with atomic absorption spectrometry was chosen. The vaporization of the elements mercury, arsenic, lead, antimony and selenium is based on combustion in an oxyhydrogen flame. To check the efficiency of the analytical system, the uncertainty of results was calculated on the basis of the "Guide to the Expression of Uncertainty in Measurement". Received: 13 January 1997 · Accepted: 29 March 1997     

Traceable measurements in clinical laboratories

 Reliable, traceable and comparable measurements provide the rational basis for evaluation of the quality of a result and the starting point for recognized laboratory accreditation in any national area. Modern medical diagnostics and treatment involve rapidly rising numbers and types of clinical laboratory measurements, that are reliable. Therefore, the basic principles to be followed to assure the traceability of clinical measurements as required by the Romanian Laws of Metrology are reviewed. Main sources affecting the quality of the unbroken chain of calibrations that relate the measurements back to appropriate measurement standards are discussed. Examples of how to achieve traceable measurements in clinical laboratories are presented. Details of specific uses of reference materials, measuring instruments and standard measurement methods are also discussed. Received: 8 January 1998 · Accepted: 21 April 1998     

红外光谱法直接鉴别苦丁茶的研究

本文利用傅立叶变换红外光谱(FTIR)法快速、直接地测定了11种苦丁茶,并对所获得的指纹图谱进行特征峰指认和对比分析。结果表明:各种苦丁茶化学成分相同,而由于各成分间的相对含量的不同,使每种样品都有自己独特的红外谱图,不同产地、不同级别苦丁茶的红外吸收频率、吸收峰的相对强度都存在比较大的差异。同时还运用傅立叶变换红外光谱技术对不同产地、不同级别苦丁茶的混合化学体系进行了全组分快速分析,为苦丁茶的鉴别及质量控制提供了可靠的依据。     

The application of the measurement uncertainty concept to in-process control in pharmaceutical development

 Any analytical data is used to provide information about a sample. The "possible error" of the measurement can be of extreme importance in order to have complete information. The measurement uncertainty concept is a way to achieve quantitative information about this "possible error" using an estimation procedure. On the basis of the analytical result, the chemist makes a decision on the next step of the development process. If the uncertainty is unknown, the information is not complete; therefore this decision might be impossible. The major problem for the in-process control (IPC) procedure is that not only the repeatability but also the intermediate precision (which expresses the variations within laboratories related to different days, different analysts, different equipment, etc.) has to be good enough to make a decision. Unfortunately, the statistical information achieved from one single analytical run only gives information about the repeatability. This paper shows that the estimation of the measurement uncertainty for IPC is a way to solve the problem and gives the necessary information about the quality of the procedure. An example demonstrates that an estimate of uncertainty based on the standard deviations of an analytical method gives a value similar to one based on the standard deviations obtained from a control chart. Therefore, the estimation is both a very useful and also a very cost-effective tool. Though measurement uncertainty cannot replace validation in general, it is a viable alternative to validation for all methods that will never be used routinely. Received: 24 May 1996 Accepted: 10 August 1996