Influence of fluoride on f-f transitions of Eu in LiEuM2O8 (M=Mo, W)

The influence of fluoride on the luminescence of LiEuM₂O₈ (M=Mo, W) was studied. LiEuMo₂O₈ and LiEuW₂O₈ formed the whole range of solid solutions, which emitted intense red luminescence under the excitations by 395, 465 and 535 nm wavelengths. When doped with fluoride, the materials also formed solid solutions and the luminescent intensity was remarkably enhanced. The phosphor with optimized compositions in this system would be a promising red component for solid-state lighting devices based on GaN light-emitting diodes.     

铑（Ⅲ）－钼酸盐－罗丹明B显色体系的研究和应用

在聚乙烯醇（ＰＶＡ）存在下，铑（Ⅲ）与钼酸盐和罗丹明Ｂ（ＲＢ）形成离子缔合物，缔合物的最大吸收位于５８０ｎｍ，摩尔吸光系数ε值１．６８×１０５Ｌ·ｍｏｌ－１·ｃｍ－１，服从比耳定律范围０～１０μｇＲｈ／２５ｍＬ，方法用于催化剂和冶金产品中铑的测定，结果满意     

Koexistenzbeziehungen,Darstellung und Eigenschaften ternärer Phasen im System Cu/Mo/O

Coexistence Relations, Preparation and Properties of Ternary Compounds in the System Cu/Mo/O The phase diagram of the ternary system Cu/Mo/O is presented at 773 K. The compounds CuMoO₄, Cu₃Mo₂O₉, Cu₄Mo₅O₁₇, Cu₆Mo₅O₁₈, Cu_4–xMo₃O₁₂, and Cu_xMoO₃ are found to be thermodynamical stable. The homogeneity range of Cu_4–xMo₃O₁₂ runs to x = 0.1–0.2. Single crystals of CuMoO₄ and Cu₃Mo₂O₉ were grown by chemical transport reactions with TeCl₄, Cl₂, HCl, and Br₂ as transport agent. The results were compared with thermochemical calculations. The decomposition of CuMoO₄ and Cu₃Mo₂O₉ was investigated with thermal analysis and decompositon pressure measurements.     

(Me2NH2)[(Ph3Sn)3(MoO4)2], ein Triorganozinnmolybdat mit Schichtstruktur

(Me₂NH₂)[(Ph₃Sn)₃(MoO₄)₂], a Triorganotin Molybdate with Layer Structure The reaction of [(Ph₃Sn)₂MoO₄] with (Me₂NH₂)Cl in an acetonitrile/water mixture leads to the formation of (Me₂NH₂)[(Ph₃Sn)₃(MoO₄)₂] ( 1 ). ( 1 ) crystallizes in the space group Pca2₁ with a = 1967.0(4), b = 1353.1(2) and c = 2176.6(5) pm. In the crystal structure of 1 Ph₃SnO₂ bipyramides and MoO₄ tetrahedra are linked by corner sharing to give a layer structure. Additionally the layers are connected by O···H···N hydrogen bridges between MoO₄ groups and [Me₂NH₂]⁺ ions to give a 3D network structure.     

钼酸根阴离子印迹陶瓷膜的制备与吸附性能

以三氧化二铝陶瓷膜为载体,以钼酸根阴离子为模板离子,1-乙烯基咪唑为功能单体,1,6-二溴己烷为交联剂,采用表面印迹和接枝聚合方法制备了能选择性吸附Mo(Ⅵ)的新型印迹陶瓷膜(IIP-PVI/CM).采用红外光谱、X射线光电子能谱、热重分析及扫描电子显微镜等方法对陶瓷膜进行结构表征.研究了pH值对吸附性能的影响,当pH值范围为2~4时,IIP-PVI/CM具有良好吸附能力;动力学和热力学结果表明,IIP-PVI/CM对Mo(Ⅵ)的吸附符合准二级动力学模型和Langmuir吸附模型;当pH=4.0和温度为30℃时,IIP-PVI/CM对Mo(Ⅵ)具有良好选择性,Mo(Ⅵ)对W(Ⅵ)的选择性系数高达7.48;动态吸附结果表明,IIP-PVI/CM对W(Ⅵ)和Mo(Ⅵ)的吸附饱和时间分别为24和47 min,饱和吸附量分别为0.163和0.672 mmol/100 g,动态吸附时IIP-PVI/CM亦具有良好选择性;经9次吸附与解吸后,IIP-PVI/CM对Mo(Ⅵ)吸附容量仍可达到初始值的92%,再生和循环使用性能良好.     

Dimethylsulfoxide as a kinetic booster for the chemical generation of singlet oxygen in methanol

The kinetic booster effect of dimethylsulfoxide on the chemical generation of singlet oxygen, ¹O₂, from the disproportionation of hydrogen peroxide catalyzed by molybdate ions in methanol has been evidenced by detection of the IR luminescence of ¹O₂ at 1270 nm and by ⁹⁵Mo NMR spectroscopy. DMSO interacts rapidly, through a direct oxygen transfer with the stable tetraperoxomolybdate , leading to DMSO₂ and to the unstable triperoxomolybdate , which releases ¹O₂. The procedure was applied to accelerate the dark singlet oxygenation of β-citronellol and α-terpinene.     

Solid-solution red phosphors for white LEDs

Solid solutions of Eu³⁺-doped metal tungstate and molybdate phosphors were synthesized by solid-state reactions. The crystal structure of the solid-solution phosphors was determined to be tetragonal with a space group of I4₁/c. The red-emitting solid-solution phosphors exhibited a broad absorption band in the range 220-340 nm and sharp excitation peaks in the near UV to green region. The emission intensities of the solid-solution phosphors were enhanced due to the stiff lattices, as a result of the ordered distribution of cations and anions according to differences in ionic size. The increase in the energy transfer is discussed in terms of metal-ligand distances, ionization potential of Mo and the relatively large overlap between the excitation and emission spectra. Such solid-solution phosphors with a bright red emission intensity, relatively short decay time and appropriate color chromaticity have potential for use as red-emitting materials for white LEDs.     

Optical spectroscopy, 1.5 μm emission and up-conversion properties of Er-doped Li3Ba2Gd3(MoO4)8 crystal

Er³⁺:Li₃Ba₂Gd₃(MoO₄)₈ crystal has been grown from a melt of Li₂MoO₄ by the top seeded solution growth method (TSSG). The polarized spectral properties of Er³⁺:Li₃Ba₂Gd₃(MoO₄)₈ crystal were investigated and the spectroscopic parameters were calculated and analyzed based on the Judd-Ofelt (J-O) theory. The emission cross-sections were calculated by the Fuchtbauer-Ladenburg (F-L) equation and the peak values of the emission band at 1535 nm were 9.7×10⁻²¹, 7.9×10⁻²¹ and 8.4×10⁻²¹ cm² for E∥b, E∥D1 and E∥D2, respectively. Under 977 nm excitation five up-conversion fluorescence bands around 490, 530, 550, 660 and 800 nm were observed, and the possible up-conversion mechanisms were proposed.     

铂(Ⅳ)-钼酸盐-乙基罗丹明B离子缔合显色反应研究

本文研究了在聚乙烯醇（ＰＶＡ）存在下用钼酸盐与乙基罗丹明Ｂ（ＥＲＢ）形成离子缔合物，该缔合物的最大吸收位于５８０ｎｍ，摩尔吸光系数为１．１２×１０６Ｌ·ｍｏｌ－１·ｃｍ－１，服从比耳定律范围０—２．５μｇ／２５ｍＬ，缔合物至少稳定１周，考察了５０多种共存离子的影响，除生成杂多酸元素和Ａｕ（Ⅲ）、Ｏｓ（Ⅷ）、Ｐｄ（Ⅱ）、Ｉｒ（Ⅳ）外，大多数元素不干扰。测定铂的条件为：〔ＨＣｌＯ４〕＝１．２ｍｏｌ／Ｌ，〔ＭｏＯ４２－〕＝９．１×１０－４ｍｏｌ／Ｌ，〔ＥＲＢ〕＝３．２×１０－５ｍｏｌ／Ｌ，０．０８％ＰＶＡ。缔合物的摩尔比为Ｐｔ（Ⅳ）∶ＥＲＢ＝１∶２，本法已用于铂矿中铂的测定，结果满意。     

Characterisation of the anodic layers formed on 2024 aluminium alloy, in tetraborate electrolyte containing molybdate ions

Anodic layer growth on 2024 aluminium alloy at 70 °C, under 40 V, during 60 min, in 50 g L⁻¹ di-sodium tetraborate solution containing di-sodium molybdate from 0.1 to 0.5 M (pH 10) is examined. Anodising behaviours strongly depend on additive concentration. Development of anodic films is favoured with weak molybdate additions (<0.3-0.4 M). The film thicknesses increase and the porosity of anodic layers decreases. Molybdenum (+VI), detected by X-ray photoelectron spectroscopy (XPS) analysis, is present in the anodic films and the Mo incorporation, studied by energy dispersive spectroscopy (EDS) analysis, increases with molybdate concentration. However, for high molybdate concentrations (>0.4 M), anodising behaviour becomes complex with the formation of a blue molybdenum oxide at the cathode. The growth of aluminium oxide is hindered. As the anodic layers are thinner, the Mo(+VI) incorporation significantly decreases. These two configurations implicate different corrosion performances in 5% sodium chloride solution at 35 °C. As the alkaline anodic layer formed with 0.3 M molybdate species is the thickest and the Mo incorporation is the more pronounced, its corrosion resistance is the highest. The effect of morphology and composition of anodic films on pitting corrosion is also discussed.