Stabilized fiber-optic extrinsic Fabry–Perot sensor system for acoustic emission measurement

A fiber-optic Fabry–Perot (F–P) acoustic emission (AE) sensor system based on an improved double wavelength stabilization technique is described. Without stabilization, the sensor system drifts out of quadrature due to the presence of low-frequency dynamic strains. The stabilization is achieved by using a dense wavelength division multiplexer (DWDM) to generate two quadrature phase-shifted output signals. An optimum model of double wavelength stabilization is established. The filtering wavelengths of DWDM are calculated using an optimization design method. The performance of the developed sensor system was verified by two preliminary tests. One was a test on the stabilization of operating point of fiber-optic F–P sensor, and other was the detection of simulated AE signals generated by the impact and pencil lead breaking. The test results demonstrate that simulated AE signals are successfully detected using this stabilized sensor system, which solves the fade-out problem.     

Performance improvement and wavelength reuse in millimeter-wave radio-over-fiber links incorporating all-fiber optical interleaver

Simultaneous downlink performance improvement and uplink wavelength reuse in a full-duplex millimeter-wave (MMW) radio-over-fiber (RoF) system by using a simple and cost-effective all-fiber optical interleaver are proposed and demonstrated. The MMW RoF downlink performance improvement is based on suppressing optical carrier-to-sideband ratio (OCSR), with which the mechanism is confirmed by theoretic analysis and derived experimental results. Measured results show that, by suppressing OCSR using a fabricated all-fiber optical interleaver, the downlink optical receiver sensitivity is improved about 2.1 dB. The downlink data rate is 1.25 Gbit/s and the carrier frequency is 58.1 GHz; the link consists of 6 km optical single-mode fiber and 1 m wireless connection. On the other hand, with the interleaver suppressing downlink OCSR, simultaneously an optical carrier is recovered from the RoF downlink and is reused for RoF uplink transmission. The uplink is operated at 62.9 GHz and the data rate is the same 1.25 Gbit/s. With the recovered optical carrier, a laser-free remote access point is achieved. The principle, structure, and fabrication of an all-fiber optical interleaver are also presented in this paper.     

Influence of pump wavelength on the laser performance of Yb:KLu(WO4)2 crystal

By employing a tunable Ti:sapphire laser, we conducted an investigation into the effects of pump wavelength deviation on the laser performance of Yb:KLu(WO₄)₂ crystal. Pumping efficiencies exceeding 70% could be reached under lasing conditions with a 3-mm crystal of Yb concentration of 5.24 at.%, when the pumping wavelength was within the main absorption band centered at 981 nm extending from 974 to 990 nm. For different pumping wavelengths, the laser exhibited a single output–input relation with respect to absorbed pump power, giving an average slope efficiency amounting to 51%.     

Study of closed orbit response to magnet vibrations at the SSRF storage ring

This paper presents the analytical and simulation responses of the closed orbit distortion in the SSRF storage ring to random and plane wave like magnet vibrations respectively. It is shown that the use of girder is very beneficial in the view of suppressing this response function. Effect of the independently supported gradient bending magnets to the closed orbit response is given. An analytic formula is written to give a rough estimate of the closed orbit distortion due to ground motion, taking into account the closed orbit response function and girder transfer function. As an example, the result of SSRF case is given.     

一种新颖的取样光纤光栅振幅版的研制

提出了一种新颖的用于制作取样光纤光栅的取样振幅版的设计方案,其特点是具有渐变的取样周期和不变的占空比,利用这种振幅版可以简单灵活地制作出反射峰波长间隔不同的取样光栅梳状滤波器,有利于提高取样光栅的制作灵活性并降低成本.对这种方法可能存在的不足也进行了分析.利用制作出的取样光栅,基于全光纤结构实现了具有游标尺式波长调谐机理的可选波长光纤激光器. 关键词： 取样光纤光栅 梳状滤波器 可选波长光纤激光器 振幅版     

角度调谐滤光片特性分析及膜系设计

对窄带滤光片的倾斜入射特性作了分析.斜入射时其透射通带和峰值会向短波方向移动,透射曲线的稳定性跟滤光片的间隔层结构相关,多腔间使用相同的间隔层可以保证斜入射时有稳定的峰值透射率和带宽,利用该特点可以制备角度调谐窄带滤光片.透射光S和P偏振分量的中心波长随入射角度的增大出现分离现象,产生较大的偏振相关损耗.通过搭配不同厚度的高低折射率材料作为间隔层,改变其有效折射率,使其两个偏振分量的中心波长实现重合.设计了符合密集波分复用(Dense Wavelength Division Multiplexing,DWDM)系统要求的低偏振相关损耗四腔窄带角度调谐滤光片膜系,其可调谐范围达20 nm以上,并评估了所设计角度调谐滤光片的调谐性能.     

利用光栅最小偏向角法测光波波长

本文导出斜入射时,光栅谱线存在最小偏向角的条件及最小偏向角与波长间的关系,据此精确测定了光波波长,并在实验中通过与垂直入射法的比较显出其优越性。     

基于波长调制-直接吸收光谱方法的CO分子1567 nm处谱线参数高精度标定

直接吸收光谱(DAS)可直接测量分子吸收率函数,并通过拟合吸收率函数确定待测气体参数.波长调制-直接吸收光谱(WM-DAS)在DAS基础上,结合了波长调制光谱(WMS)中谐波分析思想,利用傅里叶变换复现吸收率函数,可有效提高吸收率函数的测量精度.本文利用WM-DAS方法结合长光程气体吸收池,在室温低压条件下,对CO分子1567 nm处R5-R11近红外弱吸收谱线吸收率函数进行了精确复现,其拟合残差标准差低至3×10^-5,随后根据测得的吸收率函数对谱线的碰撞展宽、Dicke收敛以及速度依赖的碰撞展宽系数等光谱参数进行了高精度标定,并将其与高灵敏度的连续波腔衰荡光谱(CW-CRDS)测量结果进行了比较,实验结果表明该方法与CW-CRDS测量结果具有高度一致性,更具有系统简单、测量速度快、对环境要求低等优点.     

Modular synthesis of photodegradable polymers with different sensitive wavelengths as UV/NIR responsive nanocarriers

We report the modular and facile synthesis of three novel polymers able to photodegrade by UV and visible light via the Passerini multicomponent polymerizations of 1,6‐hexanedioic acid and 1,6‐diisocyanohexane with 5‐methoxy‐2‐nitrobenzaldehyde ( M2 ), 4,5‐dimethoxy‐2‐nitrobenzaldehyde ( M3 ) or 7‐(N,N‐diethylamino)‐4‐formylcoumarin ( M4 ) respectively. This synthetic strategy takes the advantage of the in situ formation of a photolabile chromophore via the Passerini reaction of an aromatic aldehyde with an acid and an isocyanide, thus it is a versatile approach to regulating the photochemical property of the photolabile chromophores by just changing the aldehyde structure. Importantly, two polymers ( P3 and P4 ) even exhibit NIR degradability due to the two‐photon absorption, and their nanoparticles formulated by the single emulsion method have been used as the NIR‐responsive nanocarriers for hydrophobic dyes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 334–341     

星载海洋激光雷达最佳工作波长分析

星载激光雷达是实现海洋垂直剖面探测的有效工具,也是目前迫切需求的海洋光学遥感手段。对星载海洋激光雷达的波长参数进行评估对保证探测有效性具有重要意义。本文从探测深度和信噪比两方面分析了星载海洋激光雷达探测全球海洋的最佳波长。利用MODIS 10个波段的水体光学特性数据,估算全球海水探测深度及相应的最优波长;并根据太阳夫琅禾费暗线特性,对信号信噪比进行优化。结果表明:在探测深度方面,最优探测波长在488 nm波段的海洋占全球海洋面积的70%左右,并且全球95%以上的海域在488 nm波段的探测深度优于0.8倍的真光层深度;在信噪比方面,相对于488 nm波段,486.134 nm夫琅禾费暗线处采用0.1 nm带宽的滤光片可以将背景光强度降低70%,相应地回波信噪比整体提升了约5.0%。就全球海洋探测来说,使用486.134 nm作为探测波长可以提高探测深度,有效抑制太阳背景光,提高信噪比,因此,486.134 nm是星载海洋激光雷达的最佳工作波长。