S波段相对论速调管放大器锁相特性

对相对论速调管放大器（RKA）锁相特性进行了粒子模拟与实验研究。在2.5维粒子模拟中,研究了电子束电压波形特征对RKA锁相特性的影响,结果表明:电子束电压波形上冲对RKA锁相特性有正面影响,即能够减小相位差达到锁定状态的时间,幅度为20%的上冲导致大约23的相位差变化;波形顶降则对RKA锁相特性有负面影响,可使相位差过早地偏离稳定值,幅度为5%的顶降大约能引起50的相位差偏离;电压波形的上升时间对RKA相位锁定特性也有影响,但规律不明显。在三维粒子模拟和实验中,研究了导引磁场大小对RKA锁相特性的影响,结果表明,在1.6 T以下,RKA输出微波与种子源微波之间的相位差锁定值总体上随导引磁场的增大而减小,在细节上,呈现阶跃形式,即一定范围内导引磁场大小变化不会导致相位差的改变。实验研究表明,在导引磁场范围为0.6~1.2 T时,RKA锁定相位差随导引磁场的增大而减小,阶跃现象不明显。     

Robin型离散Schwarz波形松弛算法的收敛性分析

Schwarz波形松弛(Schwarz waveform relaxation,SWR)是一种新型区域分解算法,是当今并行计算研究领域的焦点之一,但针对该算法的收敛性分析基本上都停留在时空连续层面.从实际计算角度看,分析离散SWR算法的收敛性更重要.本文考虑SWR研究领域中非常流行的Robin型人工边界条件,分析时空离散参数t和x、模型参数等因素对算法收敛速度的影响.Robin型人工边界条件中含有一个自由参数p,可以用来优化算法的收敛速度,但最优参数的选取却需要求解一个非常复杂的极小-极大问题.本文对该极小-极大问题进行深入分析,给出最优参数的计算方法.本文给出的数值实验结果表明所获最优参数具有以下优点:(1)相比连续情形下所获最优参数,利用离散情形下获得的参数可以进一步提高Robin型SWR算法在实际计算中的收敛速度,当固定t或x而令另一个趋于零时,利用离散情形下所获参数可以使算法的收敛速度具有鲁棒性(即收敛速度不随离散参数的减小而持续变慢).(2)相比连续情形下所获收敛速度估计,离散情形下获得的收敛速度估计可以更加准确地预测算法的实际收敛速度.     

密立根油滴实验数据的计算机处理

本文主要给出了利用VB编制的处理密立根油滴实验数据的程序,解决了数据处理的复杂计算的问题,利用该程序软件处理测定的电子电量值与标称值符合得较好,使该实验可以作为综合实验安排．     

Critical evaluation of microextraction pretreatment techniques – Part 1: Single drop and sorbent‐based techniques

Sample pretreatment techniques or preconcentration constitute a very important step before the analysis of environmental, clinical, pharmaceutical, and other complex samples. Thanks to extraction techniques it is possible to achieve higher method sensitivities and selectivities. Miniaturization microextraction methods make them more environmentally friendly and only small amounts of samples are required. In the past 30 years, a number of microextraction methods have been developed and used and are documented in thousands of articles. Many reviews have been written focusing on their use in specified professional fields or on the latest trends. Unfortunately, no uniform nomenclature has been introduced for these methods. Therefore, this review attempts to classify all the essential microextraction techniques and describes their advantages, disadvantages, and the latest innovations. The methods are divided into two main groups: single drop and sorbent‐based techniques according to the type of extraction phase.     

On the Capability of the Generalized Gamma Function to Represent Spray Drop‐Size Distribution

The three‐parameter, Generalized Gamma function solution of a recent MEF formulation used to derive liquid spray drop‐size distribution, is applied to sprays resulting from three different atomization processes. The objectives of these applications are to determine the sign of the parameters for which this function reports a more reliable fit and to further understand the parameter stability problem reported elsewhere. It is found that the lack of stability of the parameters is related to a characteristic feature of the mathematical function and appears for a series of spray drop‐size distributions with constant shape. For each situation analyzed in the present study, the Generalized Gamma function provides a very good fit with parameters that are either constant or correlated to the working conditions. As far as the sign of the parameters is concerned, the results show that the best formulation is a function of the spray and that it is impossible to know, a priori, which parameter sign will report the best fit. Finally, for one situation, it is found that the Generalized Gamma function allows extrapolation of drop sizes outside the measured values. All of the results converge to conclude that the three‐parameter Generalized Gamma function, which is identical to the well‐known Nukiyama‐Tanasawa distribution, accumulates valuable attributes to represent liquid spray drop‐size distributions.     

COIL压力恢复系统气流主动冷却技术数值模拟

 引射式压力恢复系统是化学激光系统应用中的一个重要组成部分,为了提高引射器引射效率,减小整个系统尺寸,可以采用主动降低光腔出口气流温度的方法。通过数值模拟,开展了用热交换器降低光腔出口气流温度的研究。给出了混合气体的热物理性质、热交换器建模方法及数值模拟条件,比较了不同条件下热交换器性能的差异,发现由于出口气流密度很低,热交换器的总传热系数、压力损失比常规条件下有较大幅度的减小。此时适当增大椭圆管尺寸,采用高翅片换热管,可以有效地提高热交换器的换热能力。     

Finite element computations of viscoelastic two-phase flows using local projection stabilization

A three-field local projection stabilized (LPS) finite element method is developed for computations of a three-dimensional axisymmetric buoyancy driven liquid drop rising in a liquid column where one of the liquid is viscoelastic. The two-phase flow is described by the time-dependent incompressible Navier-Stokes equations, whereas the viscoelasticity is modeled by the Giesekus constitutive equation in a time-dependent domain. The arbitrary Lagrangian-Eulerian (ALE) formulation with finite elements is used to solve the governing equations in the time-dependent domain. Interface-resolved moving meshes in ALE allows to incorporate the interfacial tension force and jumps in the material parameters accurately. A one-level LPS based on an enriched approximation space and a discontinuous projection space is used to stabilize the numerical scheme. A comprehensive numerical investigation is performed for a Newtonian drop rising in a viscoelastic fluid column and a viscoelastic drop rising in a Newtonian fluid column. The influence of the viscosity ratio, Newtonian solvent ratio, Giesekus mobility factor, and the Eötvös number on the drop dynamics are analyzed. The numerical study shows that beyond a critical Capillary number, a Newtonian drop rising in a viscoelastic fluid column experiences an extended trailing edge with a cusp-like shape and also exhibits a negative wake phenomena. However, a viscoelastic drop rising in a Newtonian fluid column develops an indentation around the rear stagnation point with a dimpled shape.     

Heat Transfer Enhancement by Using Copper–Water Nanofluid Flow Inside a Pin Channel

Influences of simultaneous utilization of pin channel and copper–water nanofluid on performance of plate-fin heat exchangers were experimentally explored and compared with results obtained for the base fluid flow inside a plain channel. Experimental results clearly indicate that compared with the plain channel, the pin channel significantly improves the thermal-hydraulic performance of the plate-fin heat exchanger, about 38%. In addition, the heat transfer coefficient as well as pressure drop are increased by using the nanofluids instead of the base fluid. Noticeable average performance factor of 1.65 is obtained for the simultaneous utilization of pin channel and nanofluid inside the plate-fin heat exchanger.     

Enhanced headspace single drop microextraction method using deep eutectic solvent based magnetic bucky gels: Application to the determination of volatile aromatic hydrocarbons in water and urine samples

A facile headspace single drop microextraction method was developed using deep eutectic solvent‐based magnetic bucky gel as the extraction solvent for the first time. The hydrophobic magnetic bucky gel was formed by combining choline chloride/chlorophenol deep eutectic solvent and magnetic multiwalled carbon nanotube nanocomposite. Magnetic susceptibility, high viscosity, high sorbing ability, and tunable extractability of organic analytes are the desirable advantages of the prepared gel. Using a rod magnet as a suspensor in combination with the magnetic susceptibility of the prepared gel resulted in a highly stable droplet. This stable droplet eliminated the possibility of drop dislodgement. The prepared droplet made it possible to complete the extraction process in high temperatures and elevated agitation rates. Furthermore, using larger micro‐droplet volumes without any operational problems became possible. These facts resulted in shorter sample preparation time, higher sensitivity of the method, and lower detection limits. Under the optimized conditions, an enrichment factor of 520–587, limit of detection of 0.05–0.90 ng/mL, and linearity range of 0.2–2000 ng/mL (coefficient of determination = 0.9982–0.9995) were obtained. Relative standard deviations were < 10%. This method was successfully coupled with gas chromatography and used for the determination of benzene, toluene, ethylbenzene, and xylene isomers as harmful volatile organic compounds in water and urine samples.     

Drop properties and approximative compactness in Orlicz-Bochner function spaces

The representation of dual spaces of EM(μ,X), owing to its extensive application, is given in this paper. Using the representation, we get the sufficient and necessary conditions of LM(μ,X) possessing drop property, and extend the result of Hudzik and Wang [H. Hudzik, B. Wang, Approximative compactness in Orlicz spaces, J. Approx. Theory 95 (1998) 82-89]. Simultaneously, under some conditions, the weak^∗ drop property in LM(μ,X^∗) and LM^∗(μ,X) is discussed.