石墨-六角氮化硼微晶混合物与水高压反应产物分析

 利用球磨法制备石墨-六角氮化硼微晶混合物，并在6.1 GPa、800~1 500 ℃条件下与水进行高压反应，以便研究用水作触媒合成B-C-N三元化合物的可能性。通过对反应产物的XRD、XPS谱分析发现：高压下随着温度的升高，反应产物中出现再结晶石墨，其晶化程度逐渐提高；但没有出现再结晶六角氮化硼，也未出现立方氮化硼。在球磨不充分条件下，石墨-六角氮化硼混合物的XRD谱没有完全弥散，它们与水高压反应时，能观察到石墨与立方氮化硼分别结晶的现象，但都没有形成B-C-N晶化结构。     

基于微燃机的空气湿化循环构建与分析

基于同一微燃机,构建了注水回热(RWI)、HAT、部分空气湿化(PHAT)、压气机入口喷雾冷却的HAT(AHAT)循环模型,对各循环的性能进行了模拟分析并对比了效率和比功.结果表明,在可比条件下,空气湿化循环功率和效率较回热循环分别提高40%以上和5个百分点左右.研究结果为微燃机改造为空气湿化循环提供了依据和理论指导.     

对期望理论的两个重要推进——损失厌恶系数λ及参考点研究

行为金融学是近20年来最为重要的新兴金融理论,期望理论更是其中的亮点,其运用领域之广超乎人们的想象,所以对它的完善改进具有非常重要的意义。本文对期望理论中的损失厌恶系数和参考点问题进行了深入研究,并且得出了创新性的结果:损失厌恶系数不是常数而是动态变量;得出了内生且纳入更多投资者行为特征的参考点。这些结果是对期望理论的重要改善和推进,对其在大量金融领域和涉及到财富偏好的问题的解决中都大有裨益。     

Numerical simulations of the mitigation of unconfined explosions using water-mist

Mitigating the effects of explosive blasts has been an important concern for a long time. Water-mist presents an attractive option due to its easy availability, extensive use in the fire suppression area, and non-toxicity. However, its ability to mitigate the effects of blasts is unclear. This research uses multiphase numerical simulations to elucidate some of the issues associated with using water-mist to mitigate explosive blasts in unconfined spaces. Initial multidimensional simulations examine the effect of water-mist on the blast wave generated by a TNT explosive. Results show that the droplets are generally swept outward with the shock wave and in general do not penetrate into the secondary fireball. The water-mist does, however, mitigate the shock-front through vaporization and momentum extraction. Further simulations show that momentum extraction has the dominant role in mitigating the leading shock wave. Parametric studies indicate that droplet size and mass loading play a secondary role to the total amount of water between the observer and the explosive blast. This is a promising result for using water-mist for blast-mitigation, because it suggests that water-mist can be as effective as having a more dense “water wall” surrounding the explosive.     

On the Use of the Restitution Condition in Flexible Body Dynamics

The difference between the classical treatment offlexible body impact and the treatment of impact in flexiblemultibody dynamics is due to several fundamental reasons. Inthe classical impact theory, simple structures such as beamsand plates are used. Infinite dimensional models can bedeveloped for these simple structural elements to study theimpact dynamics and the wave propagation problem. Flexiblemultibody impact problems, on the other hand, involve bodieswith complex geometry that cannot be modeled using infinitenumber of degrees of freedom. Furthermore, the classicalimpact theory has been mainly concerned with the impactbetween a rigid mass that moves without constraints beforeit impacts a simple flexible structure. This is not amultibody simulation scenario in which the impact occursbetween kinematically constrained bodies that are subjectedto impulsive constraint forces in addition to the impactforces. These constraint forces can influence the motion ofthe two bodies immediately after impact, and as aconsequence, the simple classical theory scenario of impactdoes not apply. It is the objective of this paper to discussthe use of the restitution condition in flexible multibodyimpact problems and demonstrate that the use of thisapproach does not exclude the classical formulation.Nonetheless, the impulse momentum balance approach can serveas an effective and efficient procedure for solving theimpact problem in finite dimensional models that do not obeythe classical wave theory. Energy results of simplestructural elements are presented in order to demonstratethe consistency of using the impulse momentum balanceapproach in solving impact problems in finite dimensionalflexible body applications.     

几种旱生植物水分生理特性的比较研究

本文对梭梭(Halorylon ammodendron)等几种典型荒漠旱生植物在干旱环境下体内含水量、相对合水量、水分饱和亏缺、自由水、束缚水、水势、离体枝叶吸水速率等的变化及其与植物抗旱的关系进行了比较研究。     

Identification of a dissipation coefficient by a variational method

A generalized inverse problem for the identification of the absorption coefficient for a hyperbolic system is considered. The well-posedness of the problem is examined. It is proved that the regular part of the solution is an L ₂ function, which reduces the inverse problem to minimizing the error functional. The gradient of the functional is determined in explicit form from the adjoint problem, and approximate formulas for its calculation are derived. A regularization algorithm for the solution of the inverse problem is considered. Numerical results obtained for various excitation sources are displayed.     

相关系数与相关性度量

研究了度量相关性的两个主要工具:线性相关系数和尾部相关系数.线性相关系数反映了变量间的线性相关性,这对于一般的椭圆型分布是合适的.但如果随机变量具有不对称的尾部变化特征时,要用尾部相关系数描述它们之间的相关性.通过相关函数C opu la,对沪深股市的尾部相关系数进行了定量分析.结果表明:沪深股市具有较强的相关性.     

中高温工质在蒸发器中的换热模拟分析

本文采用分布参数的方法,建立了水源热泵中普遍采用的壳管式蒸发器稳态数学模型.通过中高温水源热泵试验台的实验数据同模拟计算结果的对比,验证了数学模型的准确性。应用此数学模型对中高温工质HTR01、HTR02及R134a在蒸发器典型制热运行工况,进行了模拟计算。得出了三种工质制冷剂侧换热系数沿管长的变化关系并对三种工质的换热性能进行了对比分析,为采用中高温工质的水源热泵换热器设计提供了参考依据.