Resolving the copper interference effect on the stripping chronopotentiometric response of lead(II) obtained at bismuth film screen-printed electrode

As copper(II) is a common ion in a variety of analytical samples, its effect on the stripping response of lead(II) at bismuth film screen-printed carbon electrode (BFSPCE) was investigated. The study was conducted using a screen-printed three-electrode system (working, counter and reference electrodes), with the carbon-working electrode plated in situ with bismuth film. Copper present at significant concentration level in samples was found to affect the sensitivity of the electrode by reducing the constant current stripping chronopotentiometric (CCSCP) response of lead(II). Recovery of the lead stripping response at the BFSPCE in the presence of copper was obtained when 0.1 mM ferricyanide was added to the test solution. The ferricyanide added circumvents the detrimental effect of copper(II) by selectively masking the copper ions by forming a complex. The analytical utility of the procedure is illustrated by the stripping chronopotentiometric determinations of lead(II) in soil extracts.     

FT合成沉淀Fe／Cu／K催化剂有效因子的计算Ⅰ．工业颗粒催化剂有效因子的计算

用包括水抑制作用的动力学方程，根据建立的反应扩散模型和ＦＴ合成化学计量关系，计算了工业原颗粒ＦＴ合成沉淀Ｆｅ／Ｃｕ／Ｋ催化剂在工业操作条件下的有效因子。根据不同的产物组成，建立了三种化学计量关系式，比较了气相反应和气液反应的有效因子，确立了ＦＴ合成沉淀Ｆｅ／Ｃｕ／Ｋ催化剂有效因子的计算方法。在ＦＴ合成反应条件下，产物蜡充满了催化剂的微孔，各组分在蜡中的扩散系数要比纯气相中的扩散系数小得多。在工况操作条件下（５２３Ｋ，２．５ＭＰａ，５００ｈ￣（－１），尾气循环比３．０），工业原颗粒（ｄ＿ｐ＝２．５ｍｍ，ｌ＿ｐ＝５～１０ｍｍ）催化剂的实际有效因子是纯气相反应的一半左右，计算的平均有效因子分别为０．４０和０．４２。     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

掺杂TiO2光催化膜材料的制备及其灭菌机理

采用sol-gel技术制备了掺杂TiO2膜,考察了制备条件对溶胶稳定性的影响,并从TiO2光催化反应的角度分析了膜功能材料的灭菌机理.结果表明,溶胶化过程中温度对掺杂胶体形成速度及胶体粒径分布影响很大,40℃时制备周期短,胶体稳定.TiO2膜材料的灭菌本质在于其光照激活后产生的自由基OH·和O-2·直接攻击细菌的细胞,致使细菌蛋白质变异或脂类分解,从而杀灭细菌并使之分解.TiO2膜功能材料的灭菌效果与TiO2晶相组成直接相关,其灭菌率随膜层中锐钛矿含量的增加而提高.     

Effect of temperature on the solubility of carnallite type double salts

A method based on Pitzer's model has been used for calculation of the solubilities of carnallite type double salts crystallizing in the systems MeX–MgX₂–H₂O (Me=Li, NH₄, K, Rb, Cs; X=Cl, Br). The solubility of congruently soluble double salts was also determined experimentally at 25–75°C. The results from studies of the solubility diagrams of ternary carnallite type water-salt systems over a wide temperature range are summarized. It is found that the width of the crystallization region for each of the salts can be explained by the relative differences in the solubilities of the ternary solution components (MeX, MgX₂·6H₂O and MeX·MgX₂·6H₂O) and by a change of temperature, and by the effect of temperature on the solubility. A method is proposed for calculating Pitzer's ternary parameters of interionic interaction (_MN and _MNX) on the basis of experimental data for the solubility in water of the double salts crystallizing in the corresponding ternary water-salt systems.     

Determination of subnanomolar concentrations of cobalt by adsorptive stripping voltammetry at a bismuth film electrode

Procedures for trace cobalt determinations by adsorptive stripping voltammetry at in situ and ex situ plated bismuth film electrodes are presented. These exploit the enhancement of the cobalt peak obtained by using the Co(II)–dimethylglyoxime–cetyltrimethylammonium bromide–piperazine-N,N-bis(2-ethanesulfonic acid) system. The calibration graph for an accumulation time of 120 s was linear from 2 × 10^–10 to 2 × 10^–8 mol L^–1. The relative standard deviation from five determinations of cobalt at a concentration of 5 × 10^–9 mol L^–1 was 5.2%. The detection limit for an accumulation time of 300 s was 1.8 × 10^–11 mol L^–1. The proposed procedure was applied to cobalt determination in certified reference materials and in tap and river water samples.     

Creation of highly functional thin films using electrochemical nanotechnology

This overview describes the results of our recent study of the application of electrochemical nanotechnology to the fabrication of magnetic recording materials, interconnects in ultra-large-scale integrated (ULSI) devices, energy storage materials, and on-chip biosensors. It is important to note that electrochemical processes play significant roles in developing and fabrication such sophisticated materials and devices. In the field of magnetic recording, electrodeposition methods for preparing CoNiFe and CoFe soft magnetic thin films with a high saturation magnetic flux density were newly developed, and the significant issues for obtaining those films are highlighted. In the area of ULSI interconnects, we developed a technique using a self-assembled monolayer (SAM) for direct bonding of the interconnect layer to SiO2, and proposed a novel electroless deposition method for fabricating a diffusion barrier layer. In the field of batteries, electrodeposited SnNi alloy was proposed as a future anode material for Li batteries, and electrochemical MEMS processes were shown to be useful for fabricating micro-sized direct methanol fuel cells (DMFCs) as portable batteries for electronics applications. In the area of chemical sensors, we developed a new process for fabricating field effect transistors (FETs) modified with SAMs for on-chip biosensing applications.     

Polymer crystallization dynamics,as reflected by differential scanning calorimetry. Part 2: Numerical simulations

With the aid of a model for the kinetics of polymer crystallization, as put forward in previous publications, the shape of DSC-curves and their position on the temperature scale were simulated for various conditions of heat transfer in the apparatus. It turns out that the outcome is very dependent on the assumptions made with respect to these heat transfer conditions. For the ideal condition — no temperature differences between sample, pan and furnace — an invariable shape is predicted for the DSC-curves. They only shift to lower temperatures with increasing cooling rates. For more realistic conditions, the curves not only shift but become broader and their maxima decrease. They show a more familiar appearance. These calculations are very involved, however, A simple balance equation is shown to yield equivalent results, if a dimensionless characteristic number like the Nusselt number remains considerably smaller than one. This number contains an effective heat transfer coefficient between sample and furnace which, surprisingly, should not be too high. Apparently, the heat capacity of the pan does not play an important role under these conditions. This is investigated in Appendix II. Appendix I describes the procedure of the numerical simulations.     

Optical Properties of Model Compounds of Polyaniline

The UV and visible spectra of six model compounds were studied. These compounds can be considered as models of polyaniline in the reduced, cation radical, partially oxidized and oxidized forms. After treatment of a mixture of equal molar quantities of the reduced form (DPPD) and the oxidized form (QDIM) with acid, the following reaction was observed: DPPD(I)+QDIM(III)+2H⁺=2DPPD⁺(II) After similar treatment of the partially oxidized form (V) with acid, the radical cation salt formed. The UV and visible spectra of polyaniline in the reduced form, oxidized form and conductive form are similar to the spectra of DPPD, QDIM and DPPD⁺ or radical cation salt of V respectively. We propose that the polyaniline synthesized by chemical oxidation of aniline consists of oxidized and reduced repeat units. Upon protonation a redox reaction (or electron rearrangement) occurs and forms delocalized radical cations (polarons) in the polymer chain which are highly conductive.     

Application of an Ion Beam Technique for the Design of Visible Light-Sensitive, Highly Efficient and Highly Selective Photocatalysts: Ion-Implantation and Ionized Cluster Beam Methods

As a new concept for the design of effective photocatalysts, an ion beam technology using accelerated metal ions, a metal ion implantation and an ionized cluster beam (ICB) method, have been applied to design unique photocatalysts. The metal ion implantation of TiO₂ and Ti-containing zeolites with highly accelerated metal ions (V⁺, Cr⁺, etc.) is useful in designing photocatalysts that can operate efficiently under visible light irradiation. Also, an ICB method with a low acceleration energy is useful in preparing transparent TiO₂ thin films on various types of substrates for the efficient photocatalytic degradation of pollutants diluted in water and air. The combination of the ICB method and metal ion implantation can develop the TiO₂ thin films that are able to operate not only under UV light but also under visible light irradiation.