Thermally induced fixed diradical generation on solid supports for surface‐initiated polymerization

A method is presented for generation of all surface‐bound radicals on solid polymer surfaces. Thus, secondary amide group of newly synthesized crosslinking comonomer, methacryloyloxyethyl methacrylamide was determined as versatile precursor for generation fixed diradicals on solid microspheres, obtained by copolymerization with methyl methacrylate (MMA) in aqueous suspension. Nitrosoation of the secondary amide groups on the microbeads and followed thermolysis above 90 °C was demonstrated to give surface‐bound radicals, capable of initiating polymerization of vinyl monomers, such as; styrene, MMA, N‐vinyl formamide, and N‐vinyl, 2‐pyrrolidone, as evidenced by H NMR, Fourier transform infrared, thermogravimetric analysis, and differential scanning calorimeter techniques. Appreciable grafting yields (55.1%–286.1%) and low free‐homopolymer formation (7.2%–19.7%) were noted within 6 h of the grafting at 100 °C in each case. This strategy involving the use of amide functional crosslinker seemed to be generally applicable to generate surface‐bound radicals for surface‐initiated polymerization from various solid substrates. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Single‐pulse pulsed laser polymerization–electron paramagnetic resonance investigations into the termination kinetics of n‐butyl acrylate macromonomers

The termination of model mid‐chain radicals (MCRs), which mimic radicals that occur in acrylate polymerization over a broad range of reaction conditions, has been studied by single‐pulse pulsed laser polymerization (SP‐PLP) in conjunction with electron paramagnetic resonance spectroscopy. The model radicals were generated by initiator‐fragment addition to acrylic macromonomers that were preformed prior to the kinetic experiments, thus enabling separation of termination from the propagation reaction, for these model radicals propagate sparingly, if at all, on the timescale of SP‐PLP experiments. Termination rate coefficients of the MCRs were determined in the temperature range of 0–60°C in acetonitrile and butyl propionate solution as well as in bulk macromonomer over the range of 0–100 °C. Termination rate coefficients slightly below those of the corresponding secondary radicals were deduced, demonstrating the relatively high termination activity of this species, even when undergoing MCR–MCR termination. For chain length of 10, a reduction by a factor of 6 is observed. Unusually high activation energies were found for the termination rate coefficient in these systems, with 35 kJ mol^?1 being determined for bulk macromonomer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

On the usage of NURBS as interface representation in free‐surface flows

When simulating free‐surface flows using the finite element method, there are many cases where the governing equations require information which must be derived from the available discretized geometry. Examples are curvature or normal vectors. The accurate computation of this information directly from the finite element mesh often requires a high degree of refinement—which is not necessarily required to obtain an accurate flow solution. As a remedy and an option to be able to use coarser meshes, the representation of the free surface using non‐uniform rational B‐splines (NURBS) curves or surfaces is investigated in this work. The advantages of a NURBS parameterization in comparison with the standard approach are discussed. In addition, it is explored how the pressure jump resulting from surface tension effects can be handled using doubled interface nodes. Numerical examples include the computation of surface tension in a two‐phase flow as well as the computation of normal vectors as a basis for mesh deformation methods. For these examples, the improvement of the numerical solution compared with the standard approaches on identical meshes is shown. Copyright © 2011 John Wiley & Sons, Ltd.     

近自由面细长体的振荡问题

本文引进细长体的假定,把三维的流体运动问题化成了二维的非定常问题。前面剖面对后面剖面的干扰作用用积分表示,对物体作了适当近似以后,改善了切片理论。根据物面条件把整个问题的求解分解为兴波问题和振荡问题,而振荡问题可由兴波问题的适当组合表示出来。这样,大大简化了问题的求解。作为例子,本文数值计算了细长体的水动力导数,给出了结果。     

硅和锗纳米线的原子排布和电荷分布的密度泛函紧束缚方法研究

低维硅锗材料是制备纳米电子器件的重要候选材料,是研发高效率、低能耗和超高速新一代纳米电子器件的基础材料之一,有着潜在的应用价值。采用密度泛函紧束缚方法分别对厚度相同、宽度在0.272 nm~0.554 nm之间的硅纳米线和宽度在0.283 nm~0.567 nm之间的锗纳米线的原子排布和电荷分布进行了计算研究。硅、锗纳米线宽度的改变使原子排布,纳米线的原子间键长和键角发生明显改变。纳米线表层结构的改变对各层内的电荷分布产生重要影响。纳米线中各原子的电荷转移量与该原子在表层内的位置相关。纳米线的尺寸和表层内原子排列结构对体系的稳定性产生重要影响。     

一种生物柴油代用品在HZSM-5分子筛催化剂上的催化热解

为了深入了解生物柴油在ZSM-5沸石上的催化反应机理,在常压的流动反应器中进行了生物柴油代用品丁酸甲酯在氢型ZSM-5(HZSM-5)催化剂上的热解和催化热解. 热解产物使用气相色谱-质谱法定性和定量测量. 动力学模型和实验表明,气相中氢提取反应是热解过程中丁酸甲酯分解的主要途径,但在HZSM-5上,丁酸甲酯则主要通过解离生成烯酮和甲醇消耗;与无催化反应相比,丁酸甲酯在HZSM-5上的初始分解温度降低了约300 K. 并且通过Arrhenius方程获得了在催化热解和均相热解条件下丁酸甲酯消耗的表观活化能. 明显降低的表观活化能证实了HZSM-5对丁酸甲酯热解的催化性能. 此外催化剂的活化温度对HZSM-5的某些催化性能具有一定的影响. 该研究对进一步的实际生物柴油燃料的催化燃烧具有一定的指导意义.     

Compact Kähler Surfaces with Trivial Canonical Bundle

The classical conjectures of Weil on K3 surfaces – that the set of suchsurfaces is connected; that a version of the Torelli theorem holds; thateach such surface is Kähler; and that the period map issurjective – are reconsidered in the light of a generalisation of theNakai–Moishezon criterion, and short proofs of all the conjectures aregiven. Most of the proofs apply equally or with minor variation tocomplex 2-tori, the only other compact Kähler surfaces with trivialcanonical bundle.     

Equisingular Deformations of Sandwiched Singularities

We relate the equisingular deformation theory of plane curve singularities and sandwiched surface singularities. We show the existence of a smooth map between the two corresponding deformation functors and study the kernel of this map. In particular we show that the map is an isomorphism when a certain invariant is large enough.     

New Examples of Willmore Surfaces in S n

A surface x: M S ⁿ is called a Willmore surface if it is a criticalsurface of the Willmore functional _M (S – 2H ²)dv, where H isthe mean curvature and S is the square of the length of the secondfundamental form. It is well known that any minimal surface is aWillmore surface. The first nonminimal example of a flat Willmoresurface in higher codimension was obtained by Ejiri. This example whichcan be viewed as a tensor product immersion of S ¹(1) and a particularsmall circle in S ²(1), and therefore is contained in S ⁵(1) gives anegative answer to a question by Weiner. In this paper we generalize theabove mentioned example by investigating Willmore surfaces in S ⁿ (1)which can be obtained as a tensor product immersion of two curves. We inparticular show that in this case too, one of the curves has to beS ¹(1), whereas the other one is contained either in S ²(1) or in S ³(1). In the first case, we explicitly determine the immersion interms of elliptic functions, thus constructing infinetely many newnonminimal flat Willmore surfaces in S ⁵. Also in the latter casewe explicitly include examples.