Oxidation of lysine by ferricyanide in presence of osmium(VIII)

Osmium(VIII) catalysed oxidation of lysine by ferricyanide in excess ferrocyanide shows a complex kinetics. The order in lysine falls, from 1 to 0 while that in ferricyanide increases from 0 to 2 with large increase in lysine concentration. The rates were directly proportional to [Os(VIII)] and {Const.+[Fe(CN) ₆ ⁴ ]}. A suitable mechanism is proposed and discussed.

---

Oxidation von lysin mittels ferricyanid in der gegenwart von osmium(VIII)

Zusammenfassung Die von Os(VIII) katalysierte Oxidation von Lysin mit Ferricyanid in überschüssigem Ferrocyanid zeigt eine komplexe Kinetik. Bei starker Steigerung der Lysinkonzentration fällt die Ordnung bezüglich Lysin von 1 auf 0, während bezüglich Ferricyanid eine Erhöhung, von 0 auf 2 festzustellen ist. Die Geschwindigkeitskonstanten waren direkt proportional zu [Os(VII)] und {Const.+[Fe(CN) ₆ ⁴ ]}. Es wird ein möglicher Mechanismus vorgeschlagen und diskutiert.

     

Studies of the Reaction Behavior of Nitryl Compounds Towards Azides: Evidence for Tetranitrogen Dioxide,N4O2

The reaction behavior of NaN₃, AgN₃, and Me₃SiN₃ towards FNO₂, CINO₂, NO₂SbF₆, and NO₂BF₄ was investigated. At -30°C or below in a solvent-free system sodium azide did not react with CINO₂, NO₂BF₄, or NO₂SbF₆. Below -30°C silver azide did not react either with neat C1NO₂. Treatment of Me₃SiN₃ with pure C1NO₂ led to the formation of C1N₃, N₂O, and Me₃SiOSiMe₃. A mechanism for this reaction has been proposed. Pure chlorine azide was isolated by fractional condensation and identified by its low-temperature Raman spectrum (liquid state). The reaction of Cp₂Ti(N₃)₂ with C1NO₂ also yielded C1N₃ as the only azide-containing reaction product. Treatment of FNO₂ with NaN₃ at temperatures as low as -78°C always ended in an explosion which was probably due to the formation of FN₃ as one of the reaction products. The reaction of NO₂SbF₆ with NaN₃ in liquid CO₂ (-55°C· T· -35°C) as the solvent afforded a new azide species which was stable at low temperature in solution only and was investigated by means of low-temperature Raman spectroscopy. The obtained vibrational data give strong evidence for the presence of tetranitrogen dioxide, N₄O₂, which can be regarded as nitryl azide (NO₂N₃). The structure and vibrational frequencies of N₄O₂ were computed ab initio at correlated level (MP2/6-31 + G^*). In liquid xenon (-100°C· T· -60°C) NaN₃ did not react with NO₂SbF₆. A previous literature report on the preparation of N₄O₂ could not be established.     

Mechanisms and Kinetics of Reactions of the O（^1D,^3P） ＋ CF3Cl System

In the stratosphere,CF3Cl(CFC13)can either photodecompose or react directly with atomic oxygen to generate ozone-depleting agents such as Cl and ClO in the gas phase[1—3].Since the1970s,attention has been focused on the effects of these compounds on the …     

Hydrolyzable poly(ester-urethane) networks from L-lysine diisocyanate and D,L-lactide/ϵ-caprolactone homo- and copolyester triols

Bioabsorbable poly(ester-urethane) networks were synthesized from ethyl 2,6-diisocyanatohexanoate (L -lysine diisocyanate) (LDI) and a series of polyester triols. LDI was synthesized by refluxing L-lysine monohydrochloride with ethanol to form the ester, which was subsequently refluxed with 1,1,1,3,3,3-hexamethyldisilazane to yield a silazane-protected intermediate. This product was then phosgenated using triphosgene. Polyester triols were synthesized from D,L-lactide, ?-caprolactone, or comonomer mixtures thereof, using glycerol as initiator and stannous octoate as catalyst. Polyurethane networks were cured using [NCO]/[OH] = 1.05 and stannous octoate (0.05 wt %) for 24 h at room temperature and pressure and 24 h at 50°C and 0.1 mm Hg. LDI-based polyurethane networks were totally amorphous and possessed very low sol contents. Networks based on poly (D,L-lactide) triols were rigid (T_g ∽ 60°C) with ultimate tensile strengths of ～ 40–70 MPa, tensile moduli of ～ 1.2–2.0 GPa, and ultimate elongations of ～ 4–10%. Networks based on ?-caprolactone triols were low-modulus elastomers with tensile strengths and moduli of ～ 1–4 MPa and ～ 3–6 GPa, respectively, and ultimate elongations of ～ 50–300%. Networks based on copolymers displayed physical properties consistent with monomer composition and were tougher than the networks based on the homopolymers. Tensile strengths for the copolymers were ～ 3–25 MPa with ultimate elongations up to 600%. Hydrolytic degradation under simulated physiological conditions showed that D ,L -lactide homopolymer networks were the most resistant to degradation, undergoing virtually no change in mass or physical properties for 60 days. ?-Caprolactone-based networks were resistant to degradation for 40 days, and high-lactide copolymer-based networks suffered substantial losses in physical properties after only 3 days. © 1994 John Wiley & Sons, Inc.     

Synthesis and Structure of Ba[ZrN2] and Ba2[NbN3]

Ba₃N₂ reacts at 950°C under pure N₂ with Zr to yield dark red, air-sensitive Ba[ZrN₂]. This new compound crystallizes in the tetragonal space group P4/nmm with a = 416.10(2), c = 839.2(1) pm and Z = 2. The crystal structure was solved and refined using X-ray and neutron powder diffraction data. In the nitrido zirconate [ZrN₂]^2? the Zr atoms exhibit a square-pyramidal coordination by five N atoms at distances of 201(3) and 220.2(2) pm. The pyramids share all the edges in the basal plane to form layers parallel to (001) with their apices alternately pointing up and down. The Ba²⁺ cations are integrated into these layers at the levels of the pyramidal apices. The structure can be interpreted as a stuffed PbFCl type. Ba₂[NbN₃] is formed by the reaction of Ba₃N₂ and NbN or of Ba and Nb at 1 000°C under N₂. Isostructural to Ba₂[TaN₃] it crystallizes in the monoclinic space group C2/c with a = 613.2(3), b = 1 176.8(3), c = 1 322.9(4) pm, β = 91.65(2)°, Z = 8. The nitrido niobate anions form chains of corner sharing NbN₄ tetrahedra with distances Nb? N between 188(1) and 199.9(9) pm.     

HPLC and electrophoresis — Competitors or partners

Summary Protein structure analysis is an indispensible tool in modern biological research. However, the isolation of a protein or the separation of peptides in a form suitable for sequence analysis is a considerable technical challenge. The two predominant separation methods in protein biochemistry are chromatography and electrophoresis. In this paper the position, advantaged and disadvantages of both HPLC and electrophoresis for the separation of amino acids, peptides and proteins in protein structure analysis are discussed.     

3-(4-Hydroxymethylphenylsulfanyl)propanoic acid (HMPPA) as a new safety catch linker in solid phase peptide synthesis

A new safety catch linker, 3-(4-hydroxymethylphenylsulfanyl)propanoic acid (HMPPA), is described for use in solid phase peptide synthesis. The linker is readily synthesized from commercially available chemicals in a more cost efficient way compared to similar reported linkers. The HMPPA linker is easily attached to an amino derivatized solid support followed by on-resin oxidation of the thioether to sulfoxide, thereby making the linker very stable towards strong acid treatment. Final resin cleavage is performed by reductive acidolysis.     

Syntheses and Crystal Structures of Cadmium Complexes with Thiophenedicarboxylate and Bipyridine‐like Ligands

Two new coordination polymers [Cd(tdc)(bpy)(H₂O)]_n ( 1 ) and [Cd(tdc)(phen)]_n ( 2 ) (H₂tdc = thiophene‐2,5‐dicarboxylic acid, bpy = 2,2′‐bipyridine and phen = 1,10‐phenanthroline) have been synthesized under hydrothermal condition. Their crystal structures have been established by X‐ray single‐crystal diffraction. Complex 1 crystallizes in the orthorhombic space group Fdd2 with a = 14.757(7), b = 45.38(2), c = 10.518(5) Å, V = 7044(6) ų, Z = 16; 2 in the monoclinic space group P2₁/c with a = 7.262(1), b = 21.970(2), c = 10.051(1) Å, β = 105.01(1)°, V = 1548.8(2) ų, Z = 4. Both of them are double‐stranded chains and further assembled into three‐dimensional networks by π‐π stacking interactions. 1 and 2 are stable in air, and show blue photoluminescence at 415 nm and 410 nm, respectively.     

4-hydroxy-2-quinolones. 96. Synthesis and properties of 4-methyl-2-oxo-1,2-dihydroquinoline-3-carboxylic acid

Alkaline hydrolysis of the ethyl ester of 4-(cyanoethoxycarbonylmethyl)-2-oxo-1,2-dihydroquinoline-3-carboxylic acid is accompanied by decarboxylation with loss of two molecules of CO₂ and leads to 4-methyl-2-oxo-1,2-dihydroquinoline-3-carboxylic acid. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 887–893, June, 2006.     

Optimierung einer Kalium-Valinomycin-Diskelektrode

Zusammenfassung Es wird über die Optimierung einer Kalium-Valinomycin-Diskelektrode durch den kombinierten Zusatz verschiedener Weichmacher berichtet. Die Inkorporation dreier Weichmacher (Diphenyläther, Dinonylphthalat, Trisäthylhexylphosphat) in die PVC-Membran führt zu einer Elektrode, die wesentliche Funktionskriterien für eine Anwendung in der klinischen Analytik erfüllt.

---

Optimization of a potassium-valinomycin disc electrode

Summary Optimization of a potassium valinomycin disc electrode by adding a combination of several plasticisers is reported. Incorporation of three plasticisers (diphenyl ether, dinonyl phthalate, trisethylhexyl phosphate) into the PVC membrane results in an electrode, which has all qualities for application in clinical analysis.

Wir danken dem Fonds der Chemischen Industrie und der Firma Fresenius Apparatebau KG, Bad Homburg v.d.H., für die Unterstützung dieser Arbeit.