压电陶瓷压电特性的激光调制法测量研究

介绍可测量压电陶瓷压电特性的激光干涉调制测量方法.采用相干检测原理对信号进行提取,不仅可以抑制噪声对干涉信号的影响,而且还可以大大降低光电探测器和电路的1/f噪声.与通常干涉仪测量方法相比,这种方法具有测量灵敏度高等优点.利用该方法对压电陶瓷压电特性进行了测量,讨论了激励电压信号的频率、幅度对压电陶瓷压电常数d₃₁的影响,并对其压电迟滞曲线进行了测量.     

Mesh-Independent Modeling and Moiré Interferometry Studies of Damage Accumulation in Open-Hole Composite Laminates

Mechanics of Composite Materials - A three-dimensional ply-level modeling of multiple matrix cracking near an open hole in a quasi-isotropic composite laminate was performed. A mesh-independent...     

Applications of electronic speckle interferometry (ESI) techniques for spacecraft structural components

Laser-based electronic speckle interferometry (ESI) techniques, viz., electronic speckle pattern interferometry (ESPI) and electronic speckle shearographic interferometry (ESSI) are used for testing of spacecraft structural components. The combined ESPI and ESSI system developed in house was successfully used for the non-destructive evaluation (NDE) of honeycomb sandwich panels and propellant tanks of Indian Space Research Organization (ISRO). Debonds between face sheet and the honeycomb core were identified using (i) thermal and (ii) dual vacuum stressing methods. On-line NDE of the propellant tanks under internal pressure loading for identification of the minute cracks and thickness reduction areas were successfully implemented by ESI.     

Polarization Sensitive Spectral Interferometric Optical Coherence Tomography for Biological Samples

A spectral interferometric optical coherence tomography (OCT) system which has polarization sensitivity is developed. This system reduces the mechanical scanning dimension by employing the principle of spectral interferometry, and measures a two dimensional cross-sectional image of biological tissue with one dimensional mechanical scanning. Sixteen OCT images with different polarization conditions are measured, and two dimensional distributions of each element of the Müller matrix of a sample to be measured are calculated.     

Normalization and noise-reduction algorithm for fringe patterns

This paper presents a fringe pattern normalization and noise-reduction algorithm. Locally the background noise is suppressed, the modulation normalized and the noise smoothed. An expression to calculate the cosine-only term is formulated. It is related to the directional derivatives of the intensity fringes. Two-dimensional Fourier series are used to calculate the parameters needed for the algorithm. Experimental work is presented using diffraction and ESPI images. The programming is relatively simple and involves mainly local convolutions. The processing time using a 2 GHz computer to normalize an image of 256 × 256 pixels is approximately one second.     

Toward separation of nuclear spin isomers with coherent light.

We propose an approach for separating nuclear spin isomers with coherent light and illustrate it by numerical calculations using fulvene as a model system. The scheme employs the equivalence of torsion and interchange of equivalent H-atoms in a class of molecules of which fulvene is a simple example. The exchange symmetry couples with the rotational symmetry to produce a spatial distinction between the two photo-excited nuclear spin isomers, and wavepacket interferometry is applied to separate the species.     

Mechanism of silicon film deposition in the RF plasma reduction of silicon tetrachloride

Plasma-chemical reduction of SiCl₄ in mixtures with H₂ and Ar has been studied by optical emission spectroscopy (OES) and laser interferometry techniques. It has been found that the Ar:H₂ ratio strongly affects the plasma composition as well as the deposition (r _D) and etch (r _E) rates of Si: H, Cl films and that the electron impact dissociation is the most important channel for the production of SiCl_x species, which are the precursors of the film growth. Chemisorption of SiCl_x and the reactive surface reaction SiCl_x+H–SiCl_(x–1)0+HCl are important steps in the deposition process. The suggested deposition model givesr _D [SiCl_x][H], in agreement with the experimental data. Etching of Si: H, Cl films occurs at high Ar: H₂ ratio when Cl atoms in the gas phase become appreciable and increases with increasing Cl concentration. The etch rate is controlled by the Cl atom chemisorption step.     

用电子散斑干涉法测量材料热膨胀系数

 利用双光束电子散斑干涉法（ESPI）对试件受热变形进行了实时观测，针对一次实验过程中得到的图片较多（300～500幅）的特点，在图像处理时摒弃了以往的手动识别等位移线的办法，用MATLAB语言编写了批处理程序，能够在采集的大量散斑图片中自动快速准确地标定等位移线，得到相应的位移和应变，并结合实时测量的温度值，获得了45钢和LY12铝合金在不同温升率下的热膨胀系数及其随温度的变化。实验结果表明，在涉及的温升率范围内，温升率的改变对材料热膨胀系数的影响不明显，材料的热膨胀系数随温度的升高略有上升。     

Digital Interferometric Measurement of Forced Convection Heat Transfer in a Miniature Rectangular Channel

Investigations have been performed on convective heat transfer in water flowing through mini-channels using the non intrusive technique of laser interferometry coupled with digital image processing. Optical glass channels, fabricated with metallic heating surfaces, were studied using a Mach-Zehnder interferometer configuration. Fringe patterns captured using a high-sensitivity CCD camera were analyzed digitally based on a calculation method developed for the liquid medium. Results of parametric studies were compared and contrasted with relevant theoretical solutions from the literature. Indication of the onset of turbulence at Reynolds numbers smaller than the conventional transition Reynolds number for large channels has also been noticed in the experimental investigation.     

Comparison of scale factor estimators for ultrasonic temperature monitoring: Application to structural health monitoring

In Structural Health Monitoring (SHM) of materials, estimating the effects of environmental and operational conditions such as temperature is important. Indeed, temperature changes induce modifications of the mechanical properties of the material and therefore cause a dilation of the acoustic signals characterized by a scale factor. This paper described four scale factor estimators able to monitor changes in temperature: The short-time cross-correlation (STXC) method, the stretching method (STRE), the Minimum Variance Based Estimator method (MVBE) and the Scale Transform Based Estimator method (STBE). The first two methods have already been assessed in the literature while the latter two have been specifically developed for this study. First, closed-form for the Cramer-Rao bound on the estimates of the scale factor, from a simplified deterministic signal, are derived and simplified expressions are given. Then, a statistical evaluation of the quality of estimates is conducted through Monte-Carlo simulations using synthetic signals, based on a model taking into account the influence of temperature. A raw estimate of the computational complexity of signal processing methods also completes this evaluation phase. Finally, the experimental validation of estimation methods is conducted on an aluminum plate subjected to temperatures variations in a controlled thermal environment. The temperature estimates are then faced with an analytical model describing the material behavior.