HEAT TRANSFER AND PRESSURE DROP FROM LOUVERED SURFACES IN AUTOMOTIVE HEAT EXCHANGERS

An investigation of heat transfer and pressure drop from some louvered surfaces is presented. The test rig and the measuring as well as the data evaluating procedures are described. The measured data are transferred and presented in a nondimenswnal form. The heal transfer data are provided mainly as Stanton numbers versus Reynolds number, and the pressure drop is given as Darcy friction factors versus Reynolds number. For comparing the performance of the various louvered surfaces, the flow area goodness factors and the so-called volume goodness factors are presented. All the louvered surfaces have been found to be more efficient than the corresponding smooth surface. The standard multilouvered fin surfaces were found to be most efficient, but one of the new surfaces also performed very well.     

Hierarchical assemblies of Si3N4 nanostructures

In the present work, for the first time, we report the growth of hierarchical assemblies of Si₃N₄ nanostructures via catalyst-assisted pyrolysis of a polymeric precursor on the Si substrates. The synthesized products were characterized by using field emission scanning electron microscopy, X-ray diffraction, and transmission electron microscopy. It is found that the size of the catalytic droplet plays a critical role on the formation of hierarchical assemblies of Si₃N₄ nanostructures rather than common single nanowire. A mechanism based on the Vapor–Liquid–Solid (VLS) process was proposed for the assembly of hierarchical Si₃N₄ nanostructures.     

Ni/TPC催化剂的制备、表征及在秸秆热解燃气重整中的应用

以废弃汽车外轮胎热解后的副产物轮胎热解焦（Tyre pyrolysis char，TPC）为原料，利用均匀沉淀法制备以轮胎焦为载体的负载型Ni/TPC催化剂，采用EDX、SEM、XRD、TG、BET手段对催化剂进行了表征与分析，同时使用管式炉测试了Ni/TPC催化剂在秸秆热解燃气重整中的催化性能，并考察了热解温度、保温时间、镍负载量及催化时间对秸秆热解燃气重整效果的影响。研究结果表明，TPC富含焦和金属，Ni/TPC催化剂分散均匀，热稳定性好，比表面积为62 m²/g。催化剂活性测试显示，Ni/TPC催化剂用于作物秸秆热解燃气重整具有很强的催化活性，可显著提高燃气中可燃气体含量；热解温度在750℃、保温时间10 min、30%的Ni负载量时Ni/TPC催化剂的催化效率最高，连续使用850 min后，燃气中的H₂含量仍相对提高到50%以上，长时间使用后活性结构由Ni₃ZnC_0.7转变成FeNi₃，催化活性依然较强且趋于稳定，TPC可以作为良好的新型镍基催化剂载体。     

Flash Vacuum Pyrolysis: Techniques and Reactions

Flash vacuum pyrolysis (FVP) had its beginnings in the 1940s and 1950s, mainly through mass spectrometric detection of pyrolytically formed free radicals. In the 1960s many organic chemists started performing FVP experiments with the purpose of isolating new and interesting compounds and understanding pyrolysis processes. Meanwhile, many different types of apparatus and techniques have been developed, and it is the purpose of this review to present the most important methods as well as a survey of typical reactions and observations that can be achieved with the various techniques. This includes preparative FVP, chemical trapping reactions, matrix isolation, and low temperature spectroscopy of reactive intermediates and unstable molecules, the use of online mass, photoelectron, microwave, and millimeterwave spectroscopies, gas‐phase laser pyrolysis, pulsed pyrolysis with supersonic jet expansion, very low pressure pyrolysis for kinetic investigations, solution‐spray and falling‐solid FVP for involatile compounds, and pyrolysis over solid supports and reagents. Moreover, the combination of FVP with matrix isolation and photochemistry is a powerful tool for investigations of reaction mechanism.     

Travelling wave mathematical analysis and efficient numerical resolution for a one-dimensional model of solid propellant combustion

We investigate a model of solid propellant combustion involving surface pyrolysis coupled to finite activation energy gas-phase combustion. Existence and uniqueness of a travelling wave solution are established by extending dynamical system tools classically used for premixed flames, dealing with the additional difficulty arising from the surface regression and pyrolysis. An efficient shooting method allows to solve the problem in phase space without resorting to space discretisation nor fixed-point Newton iterations. The results are compared to solutions from a CFD code developed at ONERA, assessing the efficiency and potential of the method, and the impact of the modelling assumptions is evaluated through parametric studies.     

Investigation of molar concentration effect on structural,optical, electrical,and photovoltaic properties of spray‐coated Cu2O thin films

High quality copper oxide thin films were prepared by nebulizer spray pyrolysis technique using different concentrations of copper precursor solution. Concentration‐dependent structural, morphological, optical, and electrical properties of the prepared films are discussed. X‐ray diffraction studies done for the samples confirmed that the deposited films are in Cu₂O phase with polycrystalline cubic structure. Atomic force microscopy analysis revealed that all the films are composed of nano sheet shaped grains covering the substrate surface. Optical studies done on the samples showed band gap values 2.42, 2.31, and 2.02 eV for the solution concentration 0.01, 0.05, and 0.1 M, respectively. Photoluminescence spectral analysis showed the emission band at 620 nm confirming the formation of cuprous oxide. Electrical analysis of the films showed p‐type conductivity with a low resistivity 2.19 × 10² Ω.cm and high carrier concentration 16.76 × 10 ¹⁵ cm⁻³ for the molar concentration 0.1 M. In this work, Cu₂O/ZnO heterojunctions were also prepared, and solar cell properties were studied; they were found to show increased open circuit voltage and short circuit current for higher copper concentration.     

Thermal stability of ester linkage in the presence of 1,2,3‐Triazole moiety generated by click reaction

The copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC), so‐called “click” reaction, is one of most useful synthetic strategies to connect two polymer chains. 1,2,3‐Triazole ring (TA) produced by the click reaction has good thermal and chemical stability. However, we observed that block copolymers synthesized by the click reaction showed thermal degradation to give homopolymers when they are thermally annealed at high temperature, which is required for obtaining equilibrium microdomain structure. To investigate the origin of thermal instability of block copolymers, we synthesized model polystyrenes (PSs) using systematically designed bi‐functional atom transfer radical polymerization (ATRP) initiators containing TA. PS including both ester and TA groups showed thermal decomposition at relatively low temperature (e.g., 140 °C). MALDI‐TOF analysis clearly demonstrated that the cleavage site is the ester group adjacent to TA. We also found that the bromine group located at the polymer chain end plays an important role in pyrolysis of ester groups at low temperature. The pyrolysis occurs by syn‐elimination of the ester group. This result implies that the phase behavior of block copolymer synthesized by click reaction should be carefully investigated when high temperature thermal annealing is required. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 427–436