半线性抛物方程组的死灭现象Ⅱ

本文研究一类带奇异项的高维半线性抛物方程组的初边值问题．证明了死灭（quench－ing）现象的存在性，并给出了临界参数和死灭时间的上界估计．     

Thermal spike analysis of latent track information in magnetic insulators

A new thermal spike model is presented which predicts three regimes in the formation of latent tracks. At S_eS_et no track formation is expected. A logarithmic and a linear variation of the damage cross section versus S_e is predicted for 2.7S_etS_eS_et and S_eS_et, respectively. A simple expression is derived for the relation between S_et and the thermal properties of the target. A comparison is made with experimental data on YIG and NiFe₂O₄ and a good agreement is found.     

Mechanism of aluminium spike formation and dissipation in electrothermal atomic absorption spectrometry

The mechanism of aluminium spike formation and dissipation of aluminium atoms in electrothermal atomization absorption spectrometry has been investigated using two different approaches. The first approach employs a graphite electrothermal atomizer coupled to an inductively coupled plasma mass spectrometer (ICP-MS) in a configuration that allows simultaneous measurement of atomic, or molecular, absorption signals and mass spectrometric signals. Aluminium sub-oxide (AlO and Al₂O) and CO(g) spikes in ICP-MS are correlated with the appearance of both Al atom spikes and Al-containing molecule spikes in absorption spectrometry. The aluminium carbide (AlC₂) signal in ICP-MS is not coincident with the appearance of either Al atom spikes or Al-containing molecule spikes in absorption spectrometry. The second approach uses two different imaging systems, i.e. shadow spectral filming (SSF) and shadow spectral digital imaging (SSDI), to provide temporally and spatially resolved absorption profiles of Al atoms and Al-containing molecules during Al spike formation and dissipation. The transverse cross-sectional distribution of Al atoms and of Al-containing molecules in the graphite furnace are complementary to one another for both wall and platform atomization. The highest concentration of Al atoms is near the graphite surface, whereas the highest concentration of Al-containing molecular species is at the centre of the graphite tube. The Al-containing molecules observed in both wall and platform atomization consist of both gaseous Al-molecules and a non-uniformly distributed cloud of finely dispersed Al₂O₃(s,1) particles. A mechanism of formation that is consistent with the above experimental observations is presented. It is proposed that Al atom spikes are formed from gaseous Al₂O precursors and that this reaction is triggered by the formation of a molten, condensed-phase Al₄C₃ melt.     

Water dimer in liquid water

Summary A Self-Consistent Reaction Field Model is used to study the effect of the molecular environment on the electronic distribution and on the equilibrium geometry of the water dimer in liquid water. Computations are performed at the 6-311G++(2d,2p) MP2 level. Comparison of the results for the monomer and the dimer, in a vacuum and in the liquid, is made in order to gain a deeper insight on the cooperative phenomenon. The discussion emphasizes the trends which should be considered for deriving more sophisticated water-water potentials.     

离子键交联聚两性电解质凝胶在电场作用下的溶蚀现象

以丙烯酸(AA)和甲基丙烯酸二乙氨基乙酯(DEAM)形成的离子复合物和丙烯酰胺(AAm)为单体,采用自由基聚合制备了一系列新型的离子键交联聚两性电解质凝胶(PADA凝胶).非接触直流电场的实验表明,该离子键交联的PADA凝胶在电场下发生溶蚀现象,该现象鲜见文献报道.PADA凝胶的溶蚀速率与电场强度、溶液浓度、pH值、酸碱基团摩尔比、溶液离子价态等诸多因素有关,如溶蚀随电压的升高而增大,随盐溶液浓度的加大而增大.其溶蚀动力学研究表明PADA凝胶的溶蚀度随时间线性的增加,即溶蚀速率在整个实验时间内基本保持恒定.     

INFLUENCE OF SAMPLE THICKNESS ON ISOTHERMAL CRYSTALLIZATION KINETICS OF POLYMERS IN A CONFINED VOLUME

Isothermal crystallization process of polymers in a confined volume was simulated in the case of instantaneous nucleation by use of the Monte Carlo method. The influence of sample thickness on some kinetic parameters of crystallization was quantitatively evaluated. It was found that there was a critical thickness value. Influence of thickness on the crystallization behavior was only found for samples of thickness near and less than the critical value. For thick samples the Avrami plot showed straight lines with a turning point at the late stage of crystallization due to the secondary crystallization. When the thickness was near or less than the critical value a primary turning point appeared in the Avrami plot at the very beginning of the crystallization process. A model was proposed to explain the mechanism of this phenomenon. According to this model the critical thickness value is related to the nucleation density or the average distance between adjacent nuclei, and the primary turning point is an indication of a transformation of crystal growth geometry from a three-dimensional mode to a two-dimensional one. Analysis of experimental results of PEO isothermally crystallized at 53.5℃ was consistent with the proposed model.     

Role of surface activity in the biological actions of ranitidine and famotidine

The role of surface activity has been studied in the biological actions of ranitidine (RNT) and famotidine (FMT). The drugs have been shown to generate liquid membranes in series with a supporting membrane with the virtue of their amphiphilicity. Transport of histamine, acetylcholine, and ions (chloride, bicarbonate, potassium, sodium and calcium) have been studied in the presence of liquid membranes generated by surface-active RNT and FMT. The data on the modifications in the permeability of histamine, acetylcholine and ions indicate that the liquid membranes generated by RNT and FMT may play a significant role in their biological action.

The surface-active nature of the drugs has been discussed with relevance to their pharmacological effects.     

Determination of dynamic and sliding friction, and observation of stick-slip phenomenon on compacted polymer powders during high-velocity compaction

Dynamic friction, sliding friction, and the stick-slip phenomenon have been studied on compacted polymer powders during high-velocity compaction. It is particularly important from a practical point of view to distinguish the stick-slip mechanism and the sliding mechanism which occur concurrently. A practical experimental system has been successfully developed to study the dry frictional force and to measure the sliding coefficient between the polymer powder particles and the die wall during high-velocity compaction. Two new components have been introduced as relaxation assists to improve the compaction process by reducing the frictional forces. It was found that the relaxation assist device leads to an improvement in the polymer powder compaction process by giving a more homogeneous opposite velocity and a better locking of the powder bed in the compacted form with less change in dimensions. The subsequent movement of the particles can be reduced and the powder bed attains a higher density with a minimum total elastic spring-back. The relative time of the stick-slip phenomenon during the compacting stage is also reduced so that the time needed to transfer from an intermittent stick-slip state to a smooth sliding state is reduced and the powder bed slides smoothly. It was found that the dynamic, dry frictional force is intermittent (stick-slip mechanism) at low compaction rates but that at high compaction rates is becomes more smooth (sliding mechanism). Both mechanisms depend on the nature of the powder and on the compaction conditions. At the beginning of the compaction stage, the sliding coefficient decreases due to an increase in the radial to axial stress ratio until the maximum pressure has been reached. During the reorganization stage, more time is needed for large particles to move, rotate and slide due to their relatively large diameter and mass. As a result, the reorganization stage is extended and the stick-slip phenomenon is observed more with increasing particle size. Much better transfer of the pressure throughout the powder bed and less loss of pressure lead to a higher sliding coefficient due to the overall friction during the compaction process. It was found that the sliding coefficient is proportional to the density.

A more homogeneous density distribution in the compacted powder and a smaller pressure loss during compaction has a major influence on the sliding coefficient and on the quality of the compacted material.