2‐Amino‐5‐iodopyridinium bromide hemihydrate and 2‐amino‐5‐iodopyridinium chloride monohydrate

The hydrobromide and hydrochloride salts of 2‐amino‐5‐iodopyridine were prepared from aqueous solutions. The hydrobromide salt, C₅H₆IN₂⁺·Br⁻·0.5H₂O, crystallizes as a hemihydrate, and exhibits hydrogen bonding and π‐stacking which stabilize the crystal structure. The hydrochloride salt, C₅H₆IN₂⁺·Cl⁻·H₂O·0.375HCl, crystallized as the hydrate and exhibits similar hydrogen bonding and π‐stacking in the lattice. The most interesting feature of the hydrochloride salt is the presence of an additional fractional HCl molecule which introduces disorder in the location of the water molecule. The additional proton from the fractional HCl molecule is accounted for by the presence of a partial hydronium ion on one of the water sites.     

Sulfonated carbon catalyzed oxidation of aldehydes to carboxylic acids by hydrogen peroxide

Sulfonated carbon as a strong and stable solid acid catalyst exhibited excellent catalytic performance in various acid-catalyzed reactions. Here, sulfonated carbon, as catalyst for oxidation reaction, was prepared via the carbonization of starch followed by sulfonation with concentrated sulfuric acid. N₂ physisorption, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray fluorescence and acid-base titration were used to characterize the obtained materials. The catalytic activity of sulfonated carbon was studied in the oxidation of aldehydes to carboxylic acids using 30 wt% H₂O₂ as oxidant. This oxidation protocol works well for various aldehydes including aromatic and aliphatic aldehydes. The sulfonated carbon can be recycled for three times without obvious loss of activity.     

LSM-infiltrated LSCF cathodes for solid oxide fuel cells

Mixed ionic-electronic conductors in the family of La_xSr_1–xCo_yFe_1–yO_3–δ have been widely studied as cathode materials for solid oxide fuel cells (SOFCs). However, the long-term stability was a concern. Here we report our findings on the effect of a thin film coating of La_0.85Sr_0.15MnO_3–δ (LSM) on the performance of a porous La_0.6Sr_0.4Co_0.2Fe_0.8O_3–δ (LSCF) cathode. When the thicknesses of the LSM coatings are appropriate, an LSM-coated LSCF electrode showed better stability and lower polarization (or higher activity) than the blank LSCF cathode without LSM infiltration. An anode-supported cell with an LSM-infiltrated LSCF cathode demonstrated at 825 °C a peak power density of ～1.07 W/cm², about 24% higher than that of the same cell without LSM infiltration (～0.86 W/cm²). Further, the LSM coating enhanced the stability of the electrode; there was little degradation in performance for the cell with an LSM-infiltrated LSCF cathode during 100 h operation.     

One-step synthesis of agarose coated magnetic nanoparticles and their application in the solid phase extraction of Pd(II) using a new magnetic field agitation device

A magnetic solid phase extraction method based on agarose coated magnetic nanoparticles)ACMNPs(coupled to a new magnetic field agitation (MFA) device was developed and investigated for the separation, preconcentration and determination of Pd(II) in aqueous solutions. For the first time, the formation of the nanoparticles and their encapsulation in agarose micro-flakes was conducted in a single step. For this purpose, preparation of the magnetic iron oxide nanoparticles was performed in an alkaline agarose solution. The sizes of Fe₃O₄ nanoparticles and agarose micro-flakes were 10–14 nm and 90–130 μm, respectively. The nanomagnetic agarose particles were functionalized by iminodiacetic acid and subjected to magnetic field agitation in the MFA device. The influence of different analytical parameters such as pH, ionic strength, type and volume of desorption solvent and amount of the adsorbent on the preconcentration of Pd(II) were investigated. Eight replicated analysis at the optimized conditions, resulted in a recovery of 94.1% with an RSD of 5.2% for Pd(II). The detection limit of the method (3σ) was 47 ng L⁻¹ for the analyte. The method was successfully applied to the determination of Pd(II) in natural water samples.     

A Microwave‐assisted Headspace Solid‐phase Microextraction for Rapid Determination of Synthetic Polycyclic and Nitro‐aromatic Musks in Fish Samples

Rapid solvent‐free microwave‐assisted headspace solid‐phase microextraction (MA‐HS‐SPME) coupled with gas chromatography‐mass spectrometry (GC‐MS) was developed to determine synthetic polycyclic and nitro‐aromatic musks in fish samples. Four commonly used synthetic musks, galaxolide (HHCB), tonalide (AHTN), musk xylene (MX) and musk ketone (MK) were employed in the method development and validation. The parameters (microwave irradiation time, irradiation power, amount of water addition, pH value and addition of NaCl) affecting the extraction efficiency of analytes from fish slurry were systematically investigated and optimized. The best extraction conditions were achieved when the fish sample 2‐g mixed with 4‐mL methanol and 15‐mL deionized water (containing 4 g of NaCl, pH 2.0 in a 40‐mL sample‐vial) was microwave irradiated at 80 watt for 5 min. The limits of quantification (LOQ) were 0.4 to 1.2 ng/g in 2‐g of wet tissue. The precision for these analytes, as indicated by relative standard deviations, were less than 9% for both intra‐ and inter‐day analysis. Accuracy, expressed as the mean extraction recovery, was between 80 to 92%. A standard addition method was used to quantitate these four synthetic musks, and the total concentrations ranged from 2.1 to 23.1 ng/g in various fish samples.     

An Efficient Procedure for the Preparation of 3′-Acetyl-2′,3′-dihydrobenzothiazoles by Ring Contraction of 2′,3′-Dihydro-1,5-Benzothiazepines Under Acetylating Conditions

Reaction of 2-benzoyl-6-hydroxy-3-methyl-5-(2′-substituted-2′,3′-dihydro-1,5-benzothiazein-4′-yl) benzofurans (4a-f) with a mixture of acetic anhydride and pyridine afforded 6-acetoxy-2-benzoyl-3-methyl-5-(3′-acetyl-2′-substitutedstyryl-2′,3′-dihydrobenzothiazole-2′-yl) benzofurans (5a-f) as sole products in good yields. A reaction mechanism for the ring contraction is proposed. All the compounds (5a-f) were screened for their antifeedant activity by the “Non-Choice test method” using 6 h prestarved fourth instar larvae of Spodoptera litura F. Compounds 5a, 5c and 5d exhibited highest antifeedant activity.     

Mild Organic Ammonium Tribromide–Mediated Regioselective Ring Opening of Epoxides with Alcohols,Water, Acetic Anhydride,and Amines Under Solvent-Free Reaction Conditions

Organic ammonium tribromide (OATB), N-methylpyrrolidine-2-one hydrotribromide (MPHT) was found to be an efficient catalyst for the regioselective ring opening of epoxides with various nucleophiles under solvent free conditions. This procedure occurs under neutral and mild reaction conditions with out adding any additive and afforded high yields of products.

Regioselective A-Ring Chlorination of Benzodiazepine Analogues Using tert-Butyl Hypochlorite

Treatment of 2-phenyl-2,3-dihydro-1,4-benzodiazepin-5(4H)-one and a series of 1,4-benzoxazepinone analogues with tert-butyl hypochlorite affords products shown, by NMR and MS spectroscopy, to be chlorinated exclusively in the A-ring at positions 7 and/or 9.     

Montmorillonite K10 Clay: An Efficient Catalyst for Hantzsch Synthesis of 1,4‐Dihydropyridine Derivatives

An efficient, solid‐catalyst‐mediated Hantzsch synthesis of 1,4‐dihydropyridines is described. This procedure has such advantages as short reaction time, high yields, and simple workup. The catalyst could be reused several times and keeps its initial activity in the subsequent reactions.     

High‐Efficiency Conversion of Trimethylsilyl Ethers to Their Corresponding Ethers using Carbon‐Based Solid Acid as a New Catalyst in Heterogeneous Mixtures

Carbon‐based solid acid was used as a new catalyst for conversion of trimethylsilyl ethers to their corresponding ethers in heterogeneous mixtures. The experiments were done moderately at room temperature, and high yields in suitable times were obtained under these conditions.