Real‐time lock‐in energy loss imaging with a novel high‐speed image processing CCD video camera

We have developed a high‐speed image processing CCD video camera for real‐time energy‐loss imaging using a conventional electron microscope with an energy‐loss imaging facility. As an initial demonstration of real‐time lock‐in energy‐loss imaging, a background‐subtracted energy‐loss image was observed by attaching the high‐speed image processing CCD video camera to an analytical electron microscope equipped with a floating‐type energy‐loss imaging analyser. Copyright © 2003 John Wiley & Sons, Ltd.     

Processing and error analysis of signals in flow-injection analysis

The processing and error analysis of signals in flow-injection systems were systematically studied by simulation and experimental measurements. The content includes an error analysis for peak-height and peak-area signal, a least-squares filtering procedure applied to the flow-injection curve and a peak recognition to remove interferences from air bubbles. Simulation results were obtained by statistical processing of peak-height and peak-area values from Gaussian curves to which noise had been added. The experimental measurements were done by an automatic flow-injection device to obtain detailed information for each individual point of a peak. 2-(2-Arsenophenylazo)-7-(2,6-dichlorophenylazo-4-sulphonic acid)-1,8-dihydroxynaphthalene-3,6-disulphonic acid (DCSA) was used for measuring physical dispersion alone, and Fe(II)-o-phenanthroline for the measurement of both physical dispersion and chemical reaction. The results from computer simulation and experiments agreed well.     

Optimization of a GFAAS method for determination of total inorganic arsenic in drinking water

The new 10 μg l⁻¹ arsenic standard in drinking water has been a spur to the search for reliable routine analytical methods with a limit of detection at the μg l⁻¹ level. These methods also need to be easy to handle due to the routine analyses that are required in drinking water monitoring. Graphite furnace atomic absorption spectrometry (GFAAS) meets these requirements, but the limit of detection is generally too high except for methods using a pre-concentration or separation step. The use of a high-intensity boosted discharge hollow-cathode lamp decreases the baseline noise level and therefore allows a lower limit of detection. The temperature program, chemical matrix modifier and thermal stabilizer additives were optimized for total inorganic arsenic determination with GFAAS, without preliminary treatment. The optimal furnace program was validated with a proprietary software. The limit of detection was 0.26 μg As l⁻¹ for a sample volume of 16 μl corresponding to 4.2 pg As. This attractive technique is rapid as 20 samples can be analysed per hour. This method was validated with arsenic reference solutions. Its applicability was verified with artificial and natural groundwaters. Recoveries from 91 to 105% with relative standard deviation <5% can be easily achieved. The effect of interfering anions and cations commonly found in groundwater was studied. Only phosphates and silicates (respectively at 4 and 20 mg l⁻¹) lead to significant interferences in the determination of total inorganic arsenic at 4 μg l⁻¹.     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

A novel approach for introducing particulate matter into thermal plasmas: The triple-cathode arc

A coalesced high-intensity dc discharge is maintained between three cathodes and a single anode, stabilized by using resistors on each cathode leg. Jets of plasma gas are produced from either the cathode area or the anode area of the device. Cathode jets are generated by the self-induced pumping at the cathode tips and augmented by central gas injection. Arc voltage-current characteristics show classical convection-stabilized arc behavior. Anode heat transfer rates may be substantially increased by central gas injection toward the anode. Temperature fields in the coalesced, axially symmetric portion of the arc are determined spectrometrically and compared to those of a classical single-cathode free-burning arc.     

基于迭代小波变换的光谱信号本底扣除方法研究

本底会对光谱分析结果产生很大的干扰作用,为获取特征峰的有效信息,必须首先去除本底。该文提出了一种基于小波变换的本底扣除算法,通过对光谱及后续光谱迭代进行小波变换,利用逼近系数估计本底,直到本底收敛。提出了判断多次估计的本底最大误差是否足够小的收敛准则。利用该算法去除本底后,即可进行特征峰信息的提取。分别利用仿真光谱和实验能量色散X射线荧光光谱对算法进行了验证,并与传统小波变换和多项式拟合法进行了对比。结果表明,该算法能够更准确扣除光谱本底,对其他光谱的本底扣除也具有借鉴意义。     

CAHN－2000磁天平的调试与数据处理系统的研制

叙述了ＣＡＨＮ－２０００磁天平（美国）调试过程中如何解决液氮温区的测试，自制了磁天平与计算机的接口，编写了数据采集、处理和控制等高原 软件，节省了几万美元，部分指标超过原配套水平，三年来仪器在对国同外开放过程中，液氮温区的工作一直正常，实测了上千个样品，提供的数据已撰写数十篇文章在国内外刊物上发表。由此说明，要充分发挥进口仪器的使用效率，必须对仪器的工作原理、结构特点有透乇的了解，同时要有相当的自     

Stochastic resonance is applied to quantitative analysis for weak chromatographic signal of glyburide in plasma

Based on the theory of stochastic resonance, a new method carried on the quantitive analysis to weak chromatographic signal of glyburide in plasma, which was embedded in the noise background and the signal-to-noise ratio (SNR) of HPLC-UV is enhanced remarkably. This method enhances the quantification limit to 1 ng ml⁻¹, which is the same as HPLC-MS, and makes it possible to detect the weak signal accurately by HPLC-UV, which was not suitable before. The results showed good recovery and linear range from 1 to 50 ng ml⁻¹ of glyburide in plasma and the method can be used for quantitative analysis of glyburide.     

Calorimetric titration experiment modelled by equilibrium of 2:1 and 1:1 complexes

The analysis of the calorimetric continuous titration experiment is presented. The proposed method is basing on the collection of larger number of experimental data points than could be obtained from the classical isothermal titration calorimetry experiment. After the deconvolution procedure resulting in the correction for the calorimeter time response the pure power effect signal could be obtained. The collected data enable the detailed analysis of the closely populated 2:1 and 1:1 weak complexes.