Cu-Mg/Al复合氧化物催化碳颗粒物燃烧性能的研究

恒定二价与三价阳离子比为3(nM2+/nM3+=3),采用共沉淀法制备不同Cu含量的系列水滑石前驱物, 800 ℃焙烧4 h形成复合氧化物(CuO质量百分数分别为0％、5％、10％、15％、20％、30％、40％)用作柴油车排放碳颗粒物燃烧的催化剂,并采用XRD、BET、TG-DSC、FT-IR、TPR等表征手段研究了Cu、Mg含量对材料前驱物物化性能的影响及对其衍生复合氧化物催化碳颗粒物燃烧性能的影响．结果表明,Cu、Mg含量对材料的热稳定性、比表面和催化氧化活性有显著的影响. Mg有助于提高催化剂的热稳定性; Cu含量增加,催化剂比表面下降,但比表面不是影响催化剂活性的主要因素. CuO含量为15％时,催化剂具有最好的催化活性和稳定性,碳颗粒物的起燃温度(T10)和半转化温度(T50)分别为336 ℃和409 ℃.在CuO含量≤30％时可以形成结构完整的水滑石前驱物, CuO含量为40％时出现Cu(OH)2杂相; CuO含量< 20％时,经高温焙烧可得到均匀的复合氧化物, CuO含量≥20％时出现CuO偏析． TPR结果表明焙烧温度和复合氧化物的组成决定了材料的可还原性能．     

Thermodynamics of phenylated polyphenylene between 0 and 340 K

In an adiabatic vacuum calorimeter, the temperature dependence of the heat capacity C _p of phenylated polyphenylene and initial comonomer 1,4-bis(2,4,5-triphenylcyclopentadienone-3-yl)benzene was studied between 6 and 340 K with an uncertainty of about 0.2%. In a calorimeter with a static bomb and an isothermal shield their energies of combustion DUcomb were measured. From the experimental data, the thermodynamic functions C _p ⁰ (T), H ⁰(T)-H ⁰(0), S ⁰(T)-S⁰(0), G ⁰(T)-H ⁰(0) were calculated from 0 to 340 K, and standard enthalpies of combustion ΔH _comb ⁰ and thermodynamic parameters of formation-enthalpies ΔH _f ⁰, entropies ΔH _f ⁰, Gibbs functions ΔG _f ⁰ - of the substances studied were estimated at T=298.15 K at standard pressure. The results were used to calculate the thermodynamic characteristics (ΔH _f ⁰ ,ΔS _f ⁰, ΔG _f ⁰) of phenylated polyphenylene synthesis in the range from 0 to 340 K. This revised version was published online in July 2006 with corrections to the Cover Date.     

Combined study of thermochemical properties of nitroform and its salts

A combined method for determination of the standard enthalpies of formation of nitroform and its salts was proposed. The enthalpies of dissolution of nitroform and its ammonium, hydrazinium, guanidinium, and potassium salts in water were measured. The enthalpy of combustion of hydrazinium salt of nitroform was determined by a combustion calorimetry, and its standard enthalpy of formation was calculated. The enthalpy of formation of trinitromethyl anion in indefinitely diluted aqueous solution −24.94±0.79 kJ mol⁻¹, was calculated on the basic of the data obtained for enthalpies of formation and dissolution of ammonium and hydrazinium salts of nitroform. Standard enthalpies of formation of nitroform and its salts were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2451–2454, December, 1998.     

Effect of phosphorus flame retardants on thermo-oxidative decomposition of cotton

The effect of six organophosphorus compounds, including Pyrovatex CP (PCP), diammonium phosphate (DAP), phosphoric acid (PA), tributyl phosphate (TBP), triallyl phosphate (TAP) and triallyl phosphoric triamide (TPT) on the flame retardancy of cotton cellulose was studied. PCP, PA, and DAP are more efficient compared with the other three compounds in improving the limiting oxygen index (LOI) of cotton. The effectiveness of these compounds was investigated using scanning electron microscope (SEM) images of char formed after LOI tests, char content, activation energy of decomposition and heat of combustion data. SEM images showed that DAP, PCP and PA chars maintain the surface morphology during the burning process, which might be due to the formation of a protective layer or crosslinking effect. PA, PCP, and DAP treated fabrics have a higher activation energy of decomposition, higher char content and lower heat of combustion.     

旋流煤粉燃烧的一维综合数值模拟

发展了综合考虑气－固两相旋流流动，气相燃烧，颗粒相变与燃烧及两相辐射传热的旋流煤粉燃烧－维数学模型，给出了气－固两相能量方程中颗粒相就源项的计算表达式，应用这一模型对涡旋燃烧炉环形通道内多组工况的旋流气体燃烧和煤粉燃烧进行了数值模拟，计算得到的炉内温度分布和燃烧效率与实验数据基本相符，表明本文建立的模型可用于旋流煤粉燃烧的一维综合数值模拟。     

Thermochemistry of heteroatomic compounds 22. Enthalpies of combustion and formation of alkyl(aryl)arsines and arsenites in the condensed and gaseous phases

The enthalpies of combustion (ΔH _comb) of five primary, secondary, and tertiary alkyl(aryl)arsines in the condensed state were calculated using the equation ΔH _comb = −385.8–110.3N, where N is the number of bond-forming electrons. The dependence presented is used for the calculation of the enthalpies of combustion of full esters and amidoesters of arsinous acid of noncyclic and cyclic structures. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1042–1043, May, 2007.     

Standard molar enthalpy of formation of CH<Subscript>3</Subscript>(CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>)SO,methyl methylthiomethyl sulfoxide

Summary The standard molar enthalpy of formation of methyl methylthiomethyl sulfoxide, CH₃(CH₃SCH₂)SO, at T=298.15 K in the liquid state was determined to be -199.4±1.5 kJ mol^-1 by means of oxygen rotating-bomb combustion calorimetry.     

Standard enthalpy of formation of 3,4,5-trimethoxybenzoic acid

The energy of combustion of crystalline 3,4,5-trimethoxybenzoic acid in oxygen at T=298.15 K was determined to be -4795.9±1.3 kJ mol^-1 using combustion calorimetry. The derived standard molar enthalpies of formation of 3,4,5-trimethoxybenzoic acid in crystalline and gaseous states at T=298.15 K, Δ_fH_m ^Θ (cr) and Δ_fH_m ^Θ (g), were -852.9±1.9 and -721.7±2.0 kJ mol^-1, respectively. The reliability of the results obtained was commented upon and compared with literature values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Some thermodynamic aspects of nitrides in materials science

The energies of combustion in fluorine of gallium nitride and indium nitride in wurzite crystalline structure have been measured in a two-compartment calorimetric bomb, and new standard molar enthalpies of formation have been calculated: Δ_fH_m⁰(GaN(cr) 298.15 K)= –(163.7±4.2) kJ mol^–1 and Δ_fH_m⁰(InN(cr) 298.15 K)= –(146.5±4.6) kJ mol^–1 . Comparison with the recommended values of the Δ_fH_m⁰ nitrides from the literature is also presented.     

室温离子液体EMIES的标准生成焓

在(298.15 ±0.01) K下用转动弹热量计测定了离子液体硫酸乙酯-1-甲基-3-乙基咪唑(EMIES)及合成它的原料1-甲基咪唑的恒容燃烧热,通过计算得到它们的标准燃烧焓 分别为(－2671±2) 和(－286.3±0.5) kJ·mol－1;标准生成焓 分别为(－3060±3) kJ·mol－1和(－2145±4) kJ·mol－1.结合文献上硫酸二乙酯的标准生成焓数据,得到了合成离子液体EMIES的反应热(－102.3±1.0) kJ·mol－1,与合成实验中观察到的强烈放热现象是一致的.根据离子液体EMIES的热容数据,计算了不同温度下EMIES的标准生成焓.