Synthesis and characterization of liquid crystalline side‐chain block copolymers containing luminescent 4,4′‐bis(biphenyl)fluorene pendants

A series of new liquid crystalline homopolymers, copolymers, and block copolymers were polymerized from styrene‐macroinitiator ( SMi ) and methacrylates with pendent 4,4′‐bis(biphenyl)fluorene ( M1 ) and biphenyl‐4‐ylfluorene ( M2 ) groups through atom transfer radical polymerization (ATRP). The number‐average molecular weights (Mn) of polymers P1 ‐ P4 were 10,007, 14,852, 6,275, and 10,463 g mol^?1 with polydispersity indices values of 1.21, 1.15, 1.31, and 1.22, respectively. All polymers exhibit the nematic phase. The thermal, mesogenic, and photoluminescent properties of all polymers were investigated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4564–4572, 2007     

Liquid Chromatography-Mass Spectrometry Determination of Six 5-Nitroimidazoles in Animal Feedstuff

A liquid chromatography-mass spectrometry method for the determination of the coccidiostats metronidazole, ronidazole, dimetridazole, secnidazole, tinidazole and ipronidazole in feedstuff was developed. The 5-nitroimidazoles were extracted from animal feed with a pH 2 phosphate buffer solution followed by a solid phase extraction procedure based on HLB cartridges. The liquid chromatographic separation of the extracts was performed on a C₁₈ bonded silica column applying a gradient of elution with pH 4.3 ammonium acetate buffer solution and acetonitrile. Quantification for each 5-nitroimidazole was carried out monitoring its molecular ion [M + H]⁺ obtained by positive electrospray ionisation mode. A pool of feedstuffs was used to optimise and validate the method. Linearity, quantification limit, intra-day and inter-day reproducibility and accuracy were estimated using this pool of feedstuffs spiked with the drugs. For the confirmatory assay, several fragment ions from each 5-nitroimidazole were obtained and monitored. The method was applied successfully to determine 5-nitroimidazoles in feedstuff at level of 0.05 mg kg⁻¹.     

Synthesis and orientation study of a magnetically aligned liquid‐crystalline chitin/poly(acrylic acid) composite

A high magnetic field of 5 T was used to fabricate a magnetically aligned, optically anisotropic, liquid‐crystalline chitin/poly(acrylic acid) composite. The aligned mesophase was fixed by photoinitiated free‐radical polymerization. From an examination of polarized optical micrographs and an X‐ray diffraction study, a high degree of orientation of 0.70 was observed for the composite with a higher liquid‐crystalline chitin concentration (10.70 wt %); the orientation was reduced with a decreased chitin concentration at a given acrylic acid concentration. The X‐ray data for the developed composite showed a uniplanar orientation for the chitin crystallites, with its molecular long axes perpendicular to the direction of the magnetic field. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 711–714, 2003     

辽河冷家油田特稠油降粘剂LJVR-1及其性能评价

采用荧光法测定了辽河冷家油田冷47-556井特稠油乳化HLB值,然后以混合型表面活性剂、非离子型表面活性剂为主剂,快速渗透剂为辅剂按一定比例制备了水基降粘剂LJVR-1.实验结果表明,该降粘剂具有良好的乳化降粘性能,开采后易于破乳脱水,是一种较为理想的特稠油降粘剂.     

Immobilized polysiloxanes as stationary phases for high-performance liquid chromatography and solid phase extraction

Polysiloxanes immobilized onto the surfaces of porous silica particles have proven to be good stationary phases for the separation of multiresidues of pesticides and their metabolic/degradation products by reversed-phase high-performance liquid chromatography (RP-HPLC). Similar materials have proven effective for pre-concentration and clean-up procedures using solid phase extraction. The present paper describes the preparation and some applications of several of these packing materials.     

Ionic liquid-regulated sulfamic acid: chemoselective catalyst for the transesterification of β-ketoesters

1-Propyl-3-methylimidazolium chloride ([C₃MIm]Cl) ionic liquid and sulfamic acid (NH₂SO₃H), as a synergetic catalytic medium, were used for the transesterification of acetoacetate with alcohols of different structures. It shows the good ability for the chemoselective transesterificatin of β-ketoesters and maintains its catalytic activity in the reuse.     

Photo-orientation at liquid crystal—polymer interfaces

It is suggested that liquid crystal—polymer interfaces are coupled systems, in which the components mutually influence the orientational state of each other. The photo-orientation process at liquid crystal-polymer interfaces provides a striking example of such a coupling. Experiments show that the anisotropic structure generated by polarised light at a polymer surface is strongly affected by the phase of the liquid crystal covering the polymer. Photo-orientation is significantly more efficient when the liquid crystal is in the isotropic phase than when it exhibits orientational order. The observations are interpreted by assuming that in the smectic and nematic phases the liquid crystal stabilises to a large extent polymer chain-segments aligned parallel to the director, while it blocks the photo-induced formation of chain-segments in the perpendicular direction. Other situations, in which the coupling between the liquid crystal and the polymer can be important, are also discussed briefly.     

Synthesis of side‐chain liquid‐crystalline homopolymers and triblock copolymers with p‐methoxyazobenzene moieties and poly(ethylene glycol) as coil segments by atom transfer radical polymerization and their thermotropic phase behavior

A series of side‐chain liquid‐crystalline (LC) homopolymers of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with different degrees of polymerization were synthesized by atom transfer radical polymerization (ATRP), which were prepared with a wide range of number‐average molecular weights from 5.1 × 10³ to 20.6 × 10³ with narrow polydispersities of around 1.17. Thermal investigation showed that the homopolymers exhibit two mesophases, a smectic phase, and a nematic phase, and the phase‐transition temperatures of the homopolymers increase clearly with increasing molecular weights. A series of novel LC coil triblock copolymers with narrow polydispersities was synthesized by ATRP, and their thermotropic phase behavior was investigated with differential scanning calorimetry and polarized optical microscopy. The LC coil triblocks were designed to have an LC conformation of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with a wide range of molecular weights from 3.5 × 10³ to 1.7 × 10⁴ and the coil conformation of poly(ethylene glycol) (PEG) (number‐average molecular weight: 6000 or 12,000) segment. Their characterization was investigated with ¹H NMR, Fourier transform infrared spectra, and gel permeation chromatography. Triblock copolymers exhibited a crystalline phase, a smectic phase, and a nematic phase. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased, and the crystallization of PEG depressed with increasing molecular weight of the LC block. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2854–2864, 2003     

激光水下偏振特性用于目标图像探测

利用激光水下偏振特性获得偏振差分图像(PDI),并运用PDI技术,从理论和实验上对水下目标探测进行了研究.介绍了PDI基本概念和实验系统原理,然后比较分析了不同条件下普通图像与PDI在辨别目标距离及其纹理上的差别和PDI中背景偏振光的影响,得出利用目标和背景偏振光的差异区分二者,从而提高探测距离的结论,并取得了较好的效果.在此基础上提出了通过处理有关PDI偏振参量来进一步辨别目标与背景的设想.     

Studies on the blends of cardanol-based epoxidized novolac resin and CTPB

Cardanol-based novolac-type phenolic resins were synthesized with different mole ratios of cardanol-to-formaldehyde, viz., 1:0.6, 1:0.7, and 1:0.8. These novolac resins were epoxidized with molar excess of epichlorohydrin at 120 °C in basic medium. The epoxidized novolac resins were, separately, blended with different weight ratios of carboxyl-terminated polybutadiene liquid rubber ranging between 0-25 wt% with an interval of 5 wt%. All the blends were cured at 150 °C with 40 wt% polyamide. The formation of various products during the curing of blend samples has been studied by Fourier-transform infra-red spectroscopic analysis. The tensile strength and elongation-at-break of the cured samples increased up to 15 wt% in the blend and decreased thereafter. This blend sample was also found to be most thermally stable system. The blend morphology, studied by scanning electron microscopy analysis, was finally correlated with the structural and property changes in the blends.