Performance of YBaCuO thick film rf SQUIDs at 77 K

RF SQUID behaviour has been observed at 77 K in YBaCuO thick films prepared by screen printing technique. A hole shunted with a microbridge type of geometry is patterned manually for observing rf SQUID behaviour. Flux noise spectrum is also studied and it is found to depend on the quality of the film. The spectral density of the flux noise in the white noise region is 1.7×10⁻³ Φ₀/√Hz at 77 K.     

利用啁啾光纤光栅色散特性实现波长可调谐的主动锁模掺铒光纤环行腔激光器

在环形腔主动锁模光纤激光器中引入啁啾光纤光栅，利用啁啾光纤光栅的大色散特性，通过调节调制频率，实现波长调谐，调谐范围2nm。所得脉冲为重复频率2．5GHz，脉宽约60ps的正啁啾脉冲，。     

一种全光纤波长可调谐环路反射镜

介绍了一种全光纤波长可调谐环路反射镜。在试验温度改变140℃时，反射波长调谐了36nm，覆盖了光纤通信的C波段。对全光纤波长可调谐反射镜的反射波长的测试及调谐原理进行了分析。     

Interferometric monitoring of single-mode operation of a tunable injection laser

We propose a technique for rapid monitoring of single-mode operation of a tunable injection laser, based on analysis of the fine structure of the power-current characteristic obtained with self-heterodyning, using a Michelson interferometer. The technique makes it possible to determine the range for single-mode lasing and mode tuning as well as the presence of spurious optical feedback, and to estimate the coherence length. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 1, pp. 119–123, January–February, 2006.     

基于嵌入式系统的射频超导量子干涉仪控制系统

本文介绍了嵌入式系统在射频超导量子干涉仪控制系统中的应用,提出了嵌入式系统的整体方案,并对系统工作原理以及设计思想做了简要介绍.     

Multiaccess in all-optical networks with wavelength and code concurrency

A major obstacle in realizing fast packet switching in all-optical networks is the large tuning delays of tunable optical devices. This article proposes a multiaccess scheme for all-optical local area networks that employs both wavelength and code concurrency. In this scheme, several users share a wavelength channel through code multiplexing. The delay performance of hybrid wavelength/code division multiaccess is obtained under a simple, suboptimal access protocol based on cyclic search. Due to the reduction in the number of wavelength channels without an associated reduction in transmission concurrency, hybrid multiaccess is robust against tuning delays. At a given network throughput, the hybrid scheme achieves considerably lower delays than that of Wavelength Division Multiple Access even with a small amount of code concurrency. Conversely, the hybrid network can support a higher load when there is a maximum allowable value for the average packet delay.     

An airborne diode laser spectrometer for the simultaneous measurement of H2O and HNO3 content of stratospheric cirrus clouds

We describe a tunable diode laser spectrometer for the in situ simultaneous detection of the nitric acid and the water vapour by means of high resolution absorption spectroscopy on rovibronic lines, using a single laser emitting in the mid-infrared (5.8 μm) and a multipass cell. The instrument was designed to be installed on a high altitude aircraft, as a part of a composite payload for atmospheric aerosol studies. The instrument design criteria are discussed and the expected performances are compared with results of laboratory and field operation. Due to the high chemical activity of HNO₃, that makes difficult to use a reference cell, a fast sweep detection of direct absorption was used for the measurement. An absorption sensitivity of about 2×10⁻⁴ was achieved with an integration time of 2.5 s, corresponding to a concentration of about 4 ppb of HNO₃ in the cell and 0.1 ppb in the external aerosol. The data acquisition and processing techniques, based on the full molecular lineshape fitting are also shown and discussed, including some examples of the data acquired during the scientific flights.     

关于热阴极微波电子枪中电子反轰问题的研究

 提出了热阴极微波电子枪的设计中可以通过缩短腔长减小电子反轰功率，并通过模拟计算详细研究了腔长对电子反轰及枪出口束流品质的影响。     

Intramolecular hydrogen-bond-assisted planarization of asymmetrically functionalized alternating phenylene-pyridinylene copolymers

We report on the synthesis and characterization of a series of asymmetrically functionalized amphiphilic polymers with alternating pi-donor units (e.g., substituted benzene) and pi-acceptor units (e.g., pyridine) along the polymer backbone. The purpose of our present work involves incorporation of functional groups along the main chain to form intrachain hydrogen bonds, which promote planarization of the polymer backbone, and to fine-tune the optical properties. The structure-property relationship of polymers P1-P6 was investigated by means of analytical methods, such as FTIR spectroscopy, 1H and 13C NMR spectroscopy, UV/Vis spectroscopy, fluorescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, cyclic voltammetry, and X-ray powder diffraction. All polymers were soluble in common organic solvents, and the optical and fluorescence spectra of the polymers showed significant changes according to the formation (P4, P5) or absence (P6) of intramolecular hydrogen bonding along the polymer backbone. Moreover, the 2,6- or 3,5-linkage of the pyridine rings in P5 and P6, respectively, reduced the conjugation along the polymer backbone and this is reflected in their optical properties. The optical properties of the polymers were influenced by the addition of acid (P1-P6), base (P4-P6), and metal ions (e.g., Cu2+, Fe3+, Ag+, Ni2+, Pd2+, Mn2+, Zn2+, Mg2+, and Pr3+). Such polymers could be used in various applications, including sensors and stimuli-responsive displays.     

Self‐organized colloidal crystals for photonics and laser applications

We present an overview of recent developments in the fabrication and uses of colloidal crystals (CCs) for photonics and laser applications. Microparticles with a diameter in the range from 10 nm to 10 μm often have an intrinsic capability to spontaneously organize themselves from a colloidal suspension into 3D lattice structures. Such highly ordered 3D architectures of microparticles are called colloidal crystals (CCs). The CC structures have received tremendous attention as one of the facile and high‐throughput fabrication techniques of photonic crystals (PCs). We introduce here interesting precedents not only of diverse techniques of high‐quality CC structures, but also of their versatile applications in optical sensors responding to various external stimuli. This review also highlights a new potential use of the CCs as low‐threshold laser devices. We believe that a wide variety of CC architectures will play leading roles in the next generation of optoelectronic devices.