用PVDF实时测量激光诱导的冲击波压力

本文用自己研制的ＰＶＤＦ（ｐｏｌｙｖｅｎｙｌｉｄｅｎｆｌｕｏｒｉｄｅ）压电传感器测量了０．２ｍｍ厚铝和２．０８ｍｍ厚Ｔ３００／环氧复合材料中激光诱导的冲击波压力，首次获得了这些材料中激光冲击波压力的时间演化波形。实验在中国科大强激光实验室的ＹＡＧ脉冲激光器上进行，激光波长１．０６μｍ，脉宽３３ｎｓ，靶面平均功率密度为１０９Ｗ／ｃｍ２量级。从所得数据估计了表面入射压力，其值与已有结果符合良好。实验结果证实，ＰＶＤＦ压电传感器频响高，量程宽，多次使用重复性好，可有效应用于激光冲击波压力的实时测量     

浓悬浮体的屈服应力和最大填充率

对剪切稀化的浓悬浮体，假设在剪切状态下结构参数变化的速率服从一级动力学关系，在此基础上导出浓悬浮体最大填充率与剪应力、屈服应力与填充率之间关系的数学模型．用硅粉－甘油水溶液及可可粉－可可脂两种悬浮体的实验确认了模型对工业微米级颗粒悬浮体的适用性     

旋转IMU在光纤捷联航姿系统中的应用

惯性测量单元输出信号的精度直接影响捷联惯性导航系统的精度,为了提高捷联系统的精度,以舰船光纤捷联惯性航姿系统为应用对象,采用了双轴旋转机构连续匀速旋转IMU的系统方法,把惯性测量单元输出信号中的漂移误差调制成正弦信号,通过捷联算法中的积分运算可以有效地消除陀螺和加速度计中的漂移误差,从而有效地提高捷联惯性航姿系统的精度,并进行了系统仿真实验。仿真结果表明:经过旋转以后的IMU输出信号误差较传统非旋转方法可以减小一个数量级。基于双轴旋转IMU的系统方法可以有效地减小IMU输出信号漂移误差和提高捷联惯性航姿系统的精度。     

Effects of boundary conditions and anisotropy on elastically bent silicon

In four-point bending, the rollers that are used for load application impose additional constraints on the specimen that affect the anticlastic specimen curvature and cause the specimen displacement and stress profiles to deviate from the pure beam bending case. In this study, x-ray microdiffraction is used to map both the principal and anticlastic curvatures of elastically bent, rectangular (100)-type Si strips possessing width:thickness ratios of 40:1. We quantify the amount of roller constraint and show that the region over which the anticlastic specimen curvature is affected away from the roller is approximately five times the roller diameter. Consequently, for bending tests used to determine Poisson's ratio, if a region on the sample that is free from roller effects is not chosen, measurement errors as high as 46% can occur. Furthermore, we show that, due to the anisotropy of single crystal Si, this roller-constraining effect depends on crystallographic orientation and is more pronounced when the principal bending axis lies along the <100> direction as compared with the <100> direction.     

A new interferometric method for vibration measurement by electronic holography

Electronic holography is a well-established technique used in real-time, non-contact, whole-field displacement measurements. When using the real-time, time-averaged method for vibration measurments, the quantitative interpretation of dense fringe patterns is difficult because of speckle noise. Even when speckle-reducing procedures are used, such as multiple-frame averaging or rotation of the illumination beam, the remaining speckles and decreasing visibility of higher-order Bessel fringes are serious limitations. The primary objective of this paper is to present a new realtime, interferometric method for mechanical vibration measurements and the associated quantitative interpretation. The fringe pattern obtained by this method is quasi-binary and half as dense as in the time-averaged method. The method greatly improves the overall visibility (contrast, resolution) of vibration fringe patterns without any sacrifice in the real-time capabilities. Quantitative fringe interpretation is straightforward and based on binary fringe tracking. It allows quantitative measurements in situations where the time-averaged fringe processing fails.     

Full-field speckle pattern image correlation with B-Spline deformation function

A full-field speckle pattern image correlation method is presented that will determine directly the complete, two-dimensional deformation field during the image correlation process on digital images obtained using computer vision systems. In this work, a B-Spline function is used to represent the object deformation field throughout the entire image area. This is an improvement over subset-based image correlation methods by implicitly maintaining position and derivative continuity constraints among subsets up to a specified order. The control point variables within the B-Spline deformation function are optimized iteratively with the Levenberg-Marquardt method to achieve minimum disparity between the predicted and actual deformed images. Results have shown that the proposed method is computationally efficient, accurate and robust. The general framework of this method can be applied ton-dimensional image correlation systems that solve for multi-dimension vector fields.     

用同伦方法反演非饱和土中溶质迁移参数

非饱和土中溶质迁移参数反演问题可以归结为非线性算子方程的求解问题. 将同伦方法 引入该问题的求解，通过构造线性同伦将原问题转化为求解同伦函数最小值的无约束优化问 题. 同时在分析了同伦参数正则化效应的基础上，提出一种两段同伦参数修正方法. 即在求 解的初始阶段，根据拟Sigmoid函数调整同伦参数，以追踪同伦路径，保证计算稳定地进行； 在迭代的后期，采用与残差相关的同伦参数修正方法，以抵抗观测噪声对求解的影响. 数值 算例为求解带有平衡及非平衡吸附效应的一维非饱和土中溶质迁移模型参数反演问题，计算 结果表明了该方法的大范围收敛性及较强的抵抗观测噪声的能力.     

白光数字散斑图像频域自动识别技术——用于逐点分析的数字相移法

提出了一种应用于白光数字散斑图像频域位移测量技术的数字相移方法,利用计算机本身的能力,无需增加任何设备,通过计算机生成的四幅图像进行相移计算,得到逐点分析的条纹的未去包裹图像,从该图像确定位移的方向和大小,实现了白光数字散斑图像的全自动化处理。白光数字散斑方法设备简单,对环境的要求低,无需防振和相干光源,引入本文提出的数字相移技术,由于充分利用了计算机数字图像处理的功能,在未增加任何设备的情况下实现了全自动位移测量,是一种适合工业现场测量的有发展前途的位移测试的技术。     

碰撞角对爆炸复合材料界面状态的影响

复合材料界面状态是衡量复合质量优劣的主要评定因素之一,焊接参数和界面状态之间存在着紧密的联系。为了获得理想的复合质量,必须正确选择爆炸焊接参数。本文在实验的基础上,通过理论研究和数值计算,探讨了爆炸复合的力学模型及物理机制,验证了碰撞角对再入射流的质量(或再入射流的厚度)和爆炸复合材料界面状态存在的影响,得出了波形的变化趋势与碰撞角的变化趋势相一致的结论,同时确立了波形参数和碰撞角的半定量表达式,拓展和深化了爆炸复合的研究领域,丰富和发展了爆炸复合的成波机理,从而能够更好地指导工程应用,减少工程损耗,提高复合质量和工作效率。     

Viskositätsmessung mit dem longitudinal schwingenden Band

A method for the detection of small masses with the aid of a longitudinally vibrating band is described and further applications, e.g. for viscosity and humidity measurement are discussed. The complex Young's modulus of the band can also be determined.