甾醇边链的化学修饰

本文对近年来甾醇边链结构改造的新方法和新动向--Barton 的Gif系统氧化反应及Breslow的远程功能化反应进行了综述。     

Progress in the realisation of an autonomous environmental monitoring device for ammonia

Progress in the development of a micro-fluidic system for colorimetric monitoring of ammonia in drinking and wastewater is described. The ultimate goal is to have a miniaturised instrument that can produce accurate, reliable measurements, is easy to operate, has minimal power consumption, and can operate autonomously for a year. In this study, the indophenol reaction is incorporated into a simple, reliable analytical micro-fluidic system. Absorbance measurements for the blue ammonia-indophenol complex formed in the micro-fluidic system are shown. A key issue is the limiting stability of hypochlorite, a reagent used in the assay. The effects of hypochlorite concentration and impurities on the stability of hypochlorite are investigated and discussed. Decomposition is shown to be very dependent on the presence of heavy-metal impurities. With low levels of these catalytic metals and careful storage, hypochlorite has been shown to be stable for over a year.     

Mono- and oligosaccharide sensing by phenylboronic acid-appended 5,15-bis(diarylethynyl)porphyrin complexes

Porphyrin derivatives bearing a pair of boronic acid groups (1, 1·Zn, and 1·Cu) were designed and synthesized from 2 to construct a saccharide sensing system. Compounds 1, 1·Zn, and 1·Cu have a diethynyl porphyrin rotational axis, which is expected to act as a saccharide-binding modulator. Saccharide binding studies were conducted by UV-vis, fluorescence, and circular dichroism (CD) spectroscopies. In a water-methanol 1:1 (v/v) mixed solvent, we have found that 1·Zn can bind mono- and oligosaccharides including Lewis oligosaccharides to produce 1:1 host-saccharide complexes with the association constants of 10²−10³ M⁻¹ range. This paper thus demonstrates a new principle to design a boronic acid-based saccharide receptor.     

Generation and reactions of novel oxiranyl ‘Remote’ anions

Deprotonation of an oxiranyl β-proton takes place in a stereoselective manner providing the corresponding oxiranyl ‘remote’ anion. The anion is stabilized by chelation between the lithium and the carbonyl moiety of an ester, lactone, imide, or keto-group in the form of a five-membered cyclic intermediate. Certain ester-stabilized oxiranyl anions are stable and can be left in THF solution at −78°C for several hours. The generated anions undergo a stereoselective alkylation reaction to provide products, which could be useful intermediates in the synthesis of bioactive naturally occurring α-methylene bis-γ-butyrolactones.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

Real-time sensing and three-dimensional display of far outdoor scenes based on asymmetric integral imaging

A new asymmetric integral imaging (AII) system for real-time pickup and three-dimensional (3-D) display of far outdoor scenes based on dynamic-pixel-mapping (DPM) is proposed. DPM is a digital process to transform the elemental images captured with a lens array into the perspective-variant object images (POIs) whose structures are matched with those of display lenses, where the orders of pixels in each POI are reversely mapped, and then capture a set of virtual elemental images (EIs) at the specific depth planes from the back-propagated POIs. This DPM enables an asymmetrical use of pickup and display lens arrays, allowing the long-ranged pickup of far outdoor scenes and their resolution-enhanced 3-D reconstruction. Experiments with a pair of pickup and display lens arrays whose pitches and focal lengths are given by 7.5 mm, 30 mm and 1.2 mm, 8 mm, respectively, show that the effective pickup-range and resolution of the proposed system have been increased up to 6 m and 1600×1600 pixels, respectively, from 0.064 m and 480×480 pixels of the conventional systems employing the same pickup and display lens arrays. In addition, experiments with an implemented test bed confirms that the proposed system can provide real-time 3-D images in 25 frames per second.     

Perfect controlled joint remote state preparation independent of entanglement degree of the quantum channel

We construct a quantum circuit to produce a task-oriented partially entangled state and use it as the quantum channel for controlled joint remote state preparation. Unlike most previous works, where the parameters of the quantum channel are given to the receiver who can accomplish the task only probabilistically by consuming auxiliary resource, operation and measurement, here we give them to the supervisor. Thanks to the knowledge of the task-oriented quantum channel parameters, the supervisor can carry out proper complete projective measurement, which, combined with the feed-forward technique adapted by the preparers, not only much economizes (simplifies) the receiver's resource (operation) but also yields unit total success probability. Notably, such apparent perfection does not depend on the entanglement degree of the shared quantum channel. Our protocol is within the reach of current quantum technologies.     

Specific ionic effect for simple and rapid colorimetric sensing assays of amino acids using gold nanoparticles modified with task-specific ionic liquid

In this study, a novel task-specific ionic liquid functionalized gold nanoparticle (TSIL-GNP) was successfully prepared and applied in the recognition of amino acids. Particularly, the surface of GNP was modified with the ionic liquid containing carbamido and ester group via thiol, which was characterized by Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The stability of this material in aqueous solution improves apparently and can remain unchanged for more than three months. The effect of pH was also discussed in this study. Attractive ionic interaction would effectively weaken intensity of the covalent coupling between the metal ion and the functional groups of amino acids. Thus, TSIL-GNP was successfully applied to recognizing serine, aspartic acid, lysine, arginine, and histidine in the presence of Cu²⁺ through distinctive color changes. Suspension would be generated once a spot of cysteine was added into the GNPs solution. Results indicated that it had a good linear relationship between extinction coefficients and concentration of amino acids in a wide range of 10⁻³–10⁻⁶ M. Moreover, the proposed strategy was successfully used to analyze the histidine in urinary samples. In brief, TSIL-GNP is a suitable substrate for discrimination of five amino acids in a rapid and simple way without sophisticated instruments.     

Carbon dots with strong excitation-dependent fluorescence changes towards pH. Application as nanosensors for a broad range of pH

In this study, preparation of novel pH-sensitive N-doped carbon dots (NCDs) using glucose and urea is reported. The prepared NCDs present strong excitation-dependent fluorescence changes towards the pH that is a new behavior from these nanomaterials. By taking advantage of this unique behavior, two separated ratiometric pH sensors using emission spectra of the NCDs for both acidic (pH 2.0 to 8.0) and basic (pH 7.0 to 14.0) ranges of pH are constructed. Additionally, by considering the entire Excitation–Emission Matrix (EEM) of NCDs as analytical signal and using a suitable multivariate calibration method, a broad range of pH from 2.0 to 14.0 was well calibrated. The multivariate calibration method was independent from the concentration of NCDs and resulted in a very low average prediction error of 0.067 pH units. No changes in the predicted pH under UV irradiation (for 3 h) and at high ionic strength (up to 2 M NaCl) indicated the high stability of this pH nanosensor. The practicality of this pH nanosensor for pH determination in real water samples was validated with good accuracy and repeatability.