新型热反应大分子单体的合成与表征

溶液法合成了一些低分子量的羟端基低聚苯醚砜,并由相转移催化剂将之转为热反应大分子单体——α,ω-双甲基丙烯酸聚苯醚砜酯;用FTIR、~1H-NMR对其结构进行了表征,GPC、VPO对其分子量进行了分析和测定;用DSC、DTA对聚苯醚砜双烯大分子单体的转变温度、热反应过程进行了测定和分析。     

Thermal behaviour of bisitaconimide and reactive diluent blends

Thermal behaviour of blends based on N,N'-bis(4-itaconimidophenyl) ether (IE) and 4,4'-bis(4-allyl-2-methoxyphenoxy) benzophenone (R₁) or 4,4'-bis(2-allylphenoxy) benzophenone (R₂) are described in this paper. The reactive diluent content was varied from 5-50% (mass/mass) in these blends. A decrease in the melting point and exothermic peak temperature was observed with increasing mass percent of reactive diluent. Thermal stability of blends was affected at high mass percentage of reactive diluents. This revised version was published online in August 2006 with corrections to the Cover Date.     

Morphology and thermal properties of a PC/PE blend with reactive compatibilization

Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC‐graft‐ethylene‐co‐acrylic acid (PC‐graft‐EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene‐acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC‐graft‐EAA. Copyright © 2007 John Wiley & Sons, Ltd.     

SYNTHESIS OF CONDUCTIVE POLYANILINE VIA OXIDATION BY MnO2

A unique process of chemical oxidation polymerization of aniline using manganese dioxide (MnO2) as the oxidizing agent in an aqueous medium is described. The reaction between aniline and MnO2 follows a mechanism by which the organic monomer is oxidized while the metal oxide undergoes reductive dissolution. The effects of the amount of oxidizing agent and aniline, pH and temperature of the reactive system, type of acid on the yield and conductivity of polyaniline are discussed. The resulting polyaniline was characterized by [R and UV-Vis spectrometry. Polyaniline with a conductivity of 12.5 S/cm was obtained using 0.033 tool of aniline oxidized by 0.023 tool MnO2 in the presence of 100 mL of 2.7 mol/L HCI at 25℃ for 4 h.     

Intrinsically flame retardant epoxy resin - Fire performance and background - Part I

The flame retardant effect of newly synthesized phosphorus-containing reactive amine, which can be used both as crosslinking agent in epoxy resins and as a flame retardant, was investigated. The effect of montmorillonite and sepiolite additives on the fire induced degradation was compared to pristine epoxy resin. The effect of combining the organophosphorous amine with clay minerals was also studied. It could be concluded that the synthesized phosphorus-containing amine, TEDAP can substitute the traditional epoxy resin curing agents providing additionally excellent flame retardancy: the epoxy resins flame retarded this way reach 960 °C GWFI value, 33 LOI value and V-0 UL-94 rating - compared to the 550 °C GWFI value, 21 LOI value and “no rate” UL-94 classification of the reference epoxy resin. The peak of heat release was reduced to 1/10 compared to non-flame retarded resin, furthermore a shift in time was observed, which increases the time to escape in case of fire. The flame retardant performance can be further improved by incorporating clay additives: the LOI and the HRR results showed that the optimum of flame retardant effect of clay additives is around 1 mass% filler level in AH-16-TEDAP system. Applying a complex method for mechanical and structural characterization of the intumescent char it was determined that the flame retarded system forms significantly more and stronger char of better uniformity with smaller average bubble size. Incorporation of clay additives (owing to their bubble nucleating activity) results in further decrease in average bubble diameter.     

Interfacial reciprocal grafting by free radical reactions in polymer blends

Recent developments in the field of reactive compatibilization of polymer blends prepared by melt processing focus on the addition of low molecular weight compounds. This work deals with in situ compatibilization through the formation of graft or crosslinked copolymers at the interface. Mixtures of semicrystalline hydrocarbon polymers have been subjected to free radical reactivity, in a co-rotating twin screw extruder (ZSK 30) in a single step. The particular system, high density polyethylene and polyamide 6, was blended in the presence of a peroxide and a reactive bifunctional monomer, maleic anhydride. Because of a combined effect, the reaction appears to occur mainly at the interface, where the resulting grafted copolymer acts as an anchor for the final stabilization of the biphasic system. Different analytical techniques, such as differential scanning calorimetry, scanning electron microscopy and tensile testing, helped in characterizing the resulting blends and confirmed the high level of interfacial grafting and the expected improvement in mechanical properties.     

Electrochromic nickel oxide films made by reactive r.f. sputtering from different targets

We describe the preparation and optical–electrical characterization of thin electrochromic layers based on nickel oxide (NiO_x). These layers were deposited by reactive radiofrequency (r.f.) sputtering from nickel or nickel oxide targets, maintaining the r.f. power and varying the oxygen flow in a gas mixture of Ar and O₂ from 5% up to 30%. The Ni/O ratio in the deposited thin films was determined by Rutherford backscattering spectroscopy (RBS) and the microstructure was investigated by x‐ray diffraction. The deposition rate was found to be strongly dependent on the type of target used. The electrochromic behaviour in aqueous alkaline electrolyte (0.1 N KOH solution) was investigated by electrochemical cyclization. Samples deposited by the NiO target exhibited the lowest N/O ratio (0.5) and the highest value of intercalated charge (～4.9 × 10^?2 mC cm^?2 nm^?1). Among the same samples the highest value of the intercalated charge was found for those deposited at low oxygen flow, but these samples exhibit the smallest reversible changes in optical absorption in the wavelength range 330–1200 nm. Samples deposited by the nickel target do not exhibit significant variations in the value of the exchanged charge; the measured Ni/O ratio indicates a stoichiometry closer to NiO. We also observed the switching behaviour by analysing the films in cyclic time mode at a fixed wavelength. The commutation response time is estimated by measurement under the application of a step waveform potential. Copyright © 2004 John Wiley & Sons, Ltd.     

Depth profiles of shallow implanted layers by soft ion sputtering and total-reflection X-ray fluorescence

A new method suitable for depth profiling of shallow layers on different materials is presented. It is based on a soft and planar ion sputtering combined with differential weighing, total-reflection X-ray fluorescence (TXRF) spectrometry and Tolansky interferometry. By means of a stepwise repetition of these techniques it is possible to determine both density/depth and concentration/depth profiles. The respective quantities are expressed in terms inherent only to the sample and traceable to the SI-units or subunits gram, nanometer and mole. It is a unique feature of this method that density/depth profiles can directly be obtained from measurements without any calibration or theoretical approximation. The method is applied to a Si wafer implanted with Co ions of 25 keV energy and a nominal dose of 1×10¹⁶ cm⁻². The depth resolution is shown to be <3 nm while a total depth of some 100 nm can be reached. The concentration/depth profile is compared with RBS measurements, wet-chemical etching plus TXRF and Monte Carlo simulations. In view of the fact that only similar but not exactly the same samples have been examined by these methods, a good correspondence can be noticed.     

NMR Spectroscopic Observation of a Metal‐Free Acetylide Anion

A metal‐free acetylide was observed by using NMR spectroscopy. Metal‐free acetylides are closely related to reactive intermediates (carbanions) in solution; therefore, they have been regarded as unobservable species. However, we generated this highly reactive and unstable species through the deprotonation of phenylacetylene by using the strong nonmetallic phosphazene base tBu‐P4. In the presence of tBu‐P4, the J coupling between the ethynyl carbon and hydrogen nuclei (¹J_C,H) of phenylacetylene disappeared; this indicates the deprotonation of the alkyne terminal. Furthermore, a large low‐field shift (approximately 90 ppm) of the alkyne carbon resonance was observed. We concluded that we have observed a metal‐free carbanion with a formal charge on an sp‐hybridized carbon atom for the first time.     

Microstructural and physicochemical study of the buried Fe/AlGaAs(100) interface by transmission electron microscopy and x‐ray emission spectroscopy

Among the magnetic metal/semiconductor contacts, the Fe/GaAs system has been widely studied owing to its potential applications in electronic devices. In contrast, there are not many studies concerning the Fe/Al_xGa_1?xAs contact, and in particular there are no reports concerning the changes induced in the interfacial zone by the presence of Al. In this work, thin polycrystalline iron films were deposited by ion beam sputtering at room temperature on a 300 nm thick Al_0.25Ga_0.75As layer grown by molecular beam epitaxy onto GaAs(001). X‐ray diffraction analysis showed that the iron films are polycrystalline, and indications of a (002) texture of the film were observed. The fine scale analysis of the interface was achieved by high‐resolution transmission electron microscopy (HRTEM) observations, the results of which are compared with the physicochemical information obtained from electron‐induced x‐ray emission spectroscopy, by analysing the Al 3p valence states at the Fe/Al_xGa_1?xAs interface. The HRTEM experiments on cross‐section samples indicate that the interfacial zone between iron and AlGaAs is limited to <1.5 nm in thickness. X‐ray emission spectroscopy showed the presence of Al atoms in an FeAl‐like environment at the interface, and the existence of wrong bonds and point defects. The estimated width of the perturbed interface (2.0 ± 0.5 nm) is in agreement with the HRTEM results. Copyright © 2003 John Wiley & Sons, Ltd.