XPS and XAES analysis of copper,arsenic and sulfur chemical state in enargites

Enargite, a copper arsenic sulfide with the formula Cu₃AsS₄ is of environmental concern due to its potential to release toxic arsenic species. The oxidation and dissolution of enargite are governed by the composition and chemical state of the outermost surface layer. Qualitative and quantitative analysis of the enargite surface can be initially obtained on the basis of X‐ray photoelectron spectroscopy (XPS) binding energy and intensity data. However, a more precise determination of the chemical state of the principal elements of enargite (copper, arsenic and sulfur) in the altered surface layer and in the bulk of the mineral requires a combined analysis based on XPS photoelectron lines and the corresponding X‐ray excited Auger lines. On the basis of results obtained on natural and synthetic enargite samples and on standards of sulfides and oxides, the Auger parameter α′ of different compounds was calculated and the Wagner chemical state plots were drawn for arsenic, copper and sulfur. Arsenic in enargite is found to be in a chemical environment similar to that of arsenides or elemental arsenic, whereas copper in enargite is in a chemical state that corresponds to copper sulfide, Cu₂S, for all samples irrespective of surface treatment (natural or freshly cleaved). Only sulfur changed from a chemical state similar to that of copper or iron sulfide in freshly cleaved samples to another state in natural enargite in the as‐received state. Thus, it is the sulfur atom at the surface of enargite that is most susceptible to changes in the enargite surface state and composition. A more detailed interpretation of this behavior, based on differences in the initial and final state effects, is proposed here. The concept of Auger parameter and chemical state plot, used here for the first time for investigating enargite, has proved to be a method to unambiguously assign the chemical state of the principal elements copper, arsenic and sulfur in these minerals. Copyright © 2006 John Wiley & Sons, Ltd.     

小角X射线散射法研究CH2Cl2,CHCl3和CCl4对PE液晶结构的影响

采用小角X射线散射法研究了CH_2Cl_2、CHCl_3和CCl_4对磷脂酰乙醇胺(PE)液晶结构影响的机理.CH_3Cl_2、CHCl_3和CCl_4对PE液晶结构影响的差别主要是其空间旋转电子云密度分布形状不同所致.空间旋转电子云密度分布呈椭球状的物质有使PE液晶形成六角形H_1相的趋向;呈圆锥状的物质有诱发PE液晶形成立方六角相的趋向;呈球状的物质有使PE液晶形成片层立方相的趋向.     

纳派林类二萜生物碱研究

纳派林类化合物是一类重要的二萜生物碱,本文概述了此类化合物的化学结构,波谱特征及某些化学反应,着重介纠~1H慢~13C NMR 的特征。并列表说明所有已知的天然存在的纳派林类化合物的结构、理化性质及植物来源等。     

羟基取代烷基苯磺酸盐界面扩张粘弹性质

研究了2-羟基-3,5-二癸基苯磺酸钠(C10C10OHphSO3Na)表面和正癸烷-水界面上的扩张粘弹性质, 考察了平衡时间对界面性质的影响. 研究结果表明, 羟基取代烷基苯磺酸钠具有十分特异的界面性质, 其扩张模量比一般表面活性剂大一个数量级, 达到平衡的时间较长, 形成的界面膜弹性较大. 界面张力弛豫测定结果表明, 平衡时界面上存在特征时间长达103 s的慢过程. 上述实验结果可能是由于羟基间形成氢键造成的.     

X-ray structure and circular dichroism of pure rotamers of bis[guanosine-5'-monophosphate(-1)](N,N,N',N'-tetramethylcyclohexyl-1,2-diamine)platinum(II) complexes that have R,R and S,S configurations at the asymmetric diamine

The use of a sterically hindered diamine ligand (Me(4)DACH) has allowed for the first time, the isolation and characterization, both in the solid state (X-ray crystallography) and in solution (circular dichroism), of pure DeltaHT rotamers of [Pt(Me(4)dach)(5'-GMP)(2)] (compounds 1 and 2 for R,R and S,S configurations of the Me(4)DACH ligand, respectively). Comparison of the CD spectra obtained for each rotamer, which differ only in the chirality of the Me(4)DACH ligand (R,R or S,S) or in the chirality of the HT conformation (Delta or Lambda), allowed us to conclude that, in the 200-350 nm range, the contributions to the overall CD spectrum that stem from diamine chirality and diamine-induced chirality of platinum d--d transitions or from sugar chirality are negligible relative to the exciton chiral coupling that occurs for pi-pi* transitions of the cis guanines. Accurate molecular structures of 1.10 D(2)O and 2.14 D(2)O (conventional crystallographic agreement indexes R(1) convergent to 2.07 % and 2.18 %, respectively) revealed that the crystallized rotamers have a DeltaHT conformation that is in agreement with all previously reported X-ray structures of [Pt(diamine)(nucleos(t)ide)(2)] complexes. This conformation allows the 5'-phosphate to be located in proximity to the Me(4)DACH ligand so that (P)O...HC(N) hydrogen-bond interactions exists in both complexes. For both structures, the canting of the guanine planes on the coordination plane is right-handed (R; canting angle (Phi) of 80.9 degrees and 73.2 degrees, respectively); this indicates that the canting direction is driven by the HT conformation chirality (Delta for both compounds) and not by the chirality of the carrier ligand (different for the two compounds). Density functional theory analysis of the conformational space as a function of Phi indicated a good agreement between the computed and experimental structures. The increase in energy for Phi values below 65 degrees and 55 degrees (for 1 and 2, respectively) is mainly due to the short intramolecular contacts between C(8)H and the cis N-Me groups on the same side of the platinum coordination plane.     

Synthesis of Lanthanide Coordination Polymers with Benzophenone-4,4′-dicarboxylate： Effect of Lanthanide Contraction on Structures

Four lanthanide coordination polymers with benzophenone‐4,4′‐dicarboxylic acid (H₂bpndc) and 1,10‐phenanthroline (phen), [Ln₂(bpndc)₃(phen)] (Ln=La (1), Pr (2) and Tb (3)), [Yb(bpndc)₁₅(phen)].05H₂O (4) were obtained through solvothermal synthesis. The crystallographic data show that 1, 2, and 3 are isostructural, the Ln(III) ions in 1, 2 and 3 are all eight‐ and ten‐coordinated, respectively, and thus the Ln(III) ions are connected by bpndc ligands, resulting in an interpenetrating 3D structure. While in 4, the Yb(III) ions are eight‐coordinated and connected by bpndc ligands into a 3D structure with 1D rhombic channels, which result from the effect of lanthanide contraction from La(III) to Yb(III) ions, and the bpndc ligands in 1, 2, 3, and 4 display three types of coordination modes.     

ELECTROSPRAYING/ELECTROSPINNING OF POLY(γ-STEARYL-L-GLUTAMATE): FORMATION OF SURFACES WITH SUPERHYDROPHOBICITY

  Electrospraying/electrospinning of poly(γ-stearyl-L-glutamate) (PSLG) was investigated on a series solutions with different concentrations in chloroform. Field emission scanning electron microscopy (FESEM) and attenuated total reflectance Fourier transform infrared spectroscopy (FT-IR/ATR) were used to characterize the morphology and structure of the electrosprayed/electrospun polypeptide mats. It was found that electrospraying of PSLG with concentrations lower than 16 wt% afforded beads, while microfibers could be electrospun at the concentration of 22 wt%. The hydrophobicity of the electrosprayed/electrospun PSLG mats was investigated with static water contact angle (WCA) and tilt angle measurements. It was demonstrated that the superhydrophobic surfaces of PSLG with WCAs and tilt angles in the ranges of 150°-170° and 16.5°-4.2°, respectively, were obtained through electrospraying/electrospinning process.     

Infrared dichroism measurements on the alkyl chain packing of an ionic detergent intercalated between silicate layers

 Microcrystals of the metal silicate hydrate ilerite orient macroscopically on the surface of a ATR-crystals and thus, are accessible for infrared linear dichroism measurements. We present first results which indicate that the alkyl chain packing and the orientation of the polar group of dodecyltrimethylammoniumbromide (DTAB) intercalated between silicate layers can be determined in terms of infrared order parameters. The properties of DTAB can be modulated by the relative humidity of the surrounding atmosphere and by temperature. Upon heating DTAB undergoes a phase transition from a paraffin-like solid to a fluid phase. The former is characterized by the orthorhombic perpendicular packing of the frozen alkyl chains with tilted long axes. The interactions between the ionic groups of the surfactant and that of the host matrix stabilize the lamellar arrangement of DTAB in the crystalline and in the fluid phases. Received: 14 January 1998 Accepted: 27 July 1998     

聚偏氟乙烯取向薄膜的结晶形态

本文用小角激光散射法研究了聚偏氟乙烯薄膜在拉伸取向过程中晶体形态及结构的变化。拉伸使球晶形变为椭球,同时伴随着局部熔融与重结晶过程,散射图案由原来的四叶瓣发展为八叶瓣。红外测量及X-射线衍射分析表明,拉伸引起分子链构象改变,使晶型发生了转变。     

南桐煤镜质组非晶结构的X射线衍射研究

本文对经典煤核结构模型评述后，提出了多元非晶煤结构概念。用Ｘ射线衍射方法研究了南桐煤镜质组的原子径各分布，论证了煤大分子中同时存在芳香结构单元和脂环结构单元，它们对Ｘ射线射射强度均有贡献，非晶煤结构的有序性不在于１ｎｍ。