电子碰撞诱导原子从低激态向高激态弛豫

本文根据空心阴极放电中电子能量分布的物理图象,分析了原子从低激态向高激态弛豫的可能途径。建立高低激态集居数密度增量的关系。讨论高激态集居数密度增量获得可观量的条件。根据此条件分别选取钠原子的基态3s~2S_(1/2)和铜原子的亚稳态4s~2D_(3/2)为与激光共振的下能级,并激发具有较大自发发射几率的3s~2S_(1/2)→3p~2P°_(1/2)(和3p~2P°_(3/2))和4s~2D_(3/2)→4p~2P°_(1/2)跃迁,在远离上能级的高激态上观测到敏化荧光,并精确测得这些态的自发发射系数比值,而在更高激态上没有观测到敏化荧光,表明讨论中提出的条件是合理的。     

稀土富勒烯生成的影响因素初探

采用某些特殊的放电和提取方法，如反向放电和甲苯高温高压提取等可以有效地提高稀土富勒烯的生成效率［‘，‘’，并已先后成功高效地合成了许多含稀土富勒烯「‘’．对其提纯、表征、衍生和应用也进行了研究［‘－’j．但对影响稀土富勒烯生成的因素研究较少．在石墨律中同时填入La，Y，Sc的稀土氧化物，对其稀土富勒烯生成效率的情况进行了研究，认为稀土元素的第一电离能是影响稀土富勒烯生成的主要因素‘’，’‘．Moro等采用激光和热解吸质谱对稀土富勒烯的研究结果表明，稀土元素的氧化态是影响稀土富勒烯生成的决定性因素”’．本…     

Multielemental characterisation of cobalt by glow discharge quadrupole mass spectrometry

Multielemental determination and the assessment of purity of cobalt metal used in the preparation of Ni-based super-alloys have been carried out by glow discharge quadrupole mass spectrometry (GD-QMS). Relative sensitivity factors (RSF) generated from certified iron matrix reference samples (NIST 663 and 664 low alloy steel pin standards) could be used for the determination of different trace element constituents of the sample. Different wet chemical procedures were also carried out for the determination of the trace constituents in the sample. The GD-QMS results are in reasonably good agreement with those obtained from wet chemical procedures, validating the use of the RSF values generated on low alloy steel standards for the computation of trace element concentrations in cobalt metal. A variety of molecular ions formed through the reaction of cobalt (matrix) with the discharge gas (argon) were also detected.     

Modeling Studies of the Formation and Destruction of NO in Pulsed Barrier Discharges in Nitrogen and Air

This paper presents the results of modeling studies on the formation and destruction of NO in pulsed barrier discharges in nitrogen and air. The goals of this work are to identify the major processes involved in the formation and destruction of NO in air discharges, to distinguish between oxidative and reductive paths for NO destruction, to explore the potential importance of excited state reactions, to evaluate the role of water in such systems, and to identify the final products in the absence of heterogeneous processes. In all cases, the systems were modeled with 100×10^–4% (100 ppm) of added NO, with and without 3% added water. The focus in all of this work is chemistry in the post-pulse regime.     

火花激发原子发射光谱分析不锈钢线材

火花激发原子发射光谱法应用于直径小于8mm的不锈钢线材的分析，对此类试样应用了一种特制的夹具，用块状标准样品制作工作曲线。由于线状试样和块状标准样品之间的形状差异所产生的系统不确定度借采用同类型标样作校正，对共存元素的相互干扰也采用了相应的校正方法。其它分析条件，包括严格的制样工序，氩气的纯度要求及其流量控制，以及光源的最佳条件等，作了深入的试验。按所提出的方法测定了不锈钢线材试样中碳、硅、锰、磷、硫、铬、镍及钛等8个元素。经校正后的结果与化学法测得结果相符。     

Concentrations of Active Species in the Flowing Afterglow of a Nitrogen Microwave Plasma

Measurements of nitrogen atom density, by means of NO chemical titration, along with an evaluation of the densities of some excited species N ₂ (B, v=11), N ₂ (B, v=2), N ₂ (C, v=0), and N ₂ ⁺ (B,v=0), by means of a spectroscopic study of some bands of dinitrogen, are achieved along the flowing afterglow of a dinitrogen microwave plasma (2450 MHz) for several pressures. The concentrations obtained are in the following range: [N]10 ⁺¹⁵ , [N ₂ (B, 2)]10 ⁺⁹ –10 ⁺¹⁰ , [N ₂ (B, 11)]10 ⁺⁸ –10 ⁺⁹ , [N ₂ (C, 0)]10 ⁺⁶ –10 ⁺⁷ , [N ₂ ⁺ (B,0)]10 ⁺⁶ -10 ⁺⁸ (cm^-3). From a kinetic study of the formation and decay of excited and charged species, an estimation of N ₂ (A, v), N ₂ (X, v, and N ₂ ⁺ (X) densities can be derived: [N ₂ (A, v)]10 ⁺¹² , [N ₂ (X, v6)]10 ⁺¹⁵ –10 ⁺¹⁶ , [N ₂ (X, v12)]10 ⁺¹⁴ –10 ⁺¹⁵ , [N ₂ ⁺ (X)]10 ⁺¹⁰ (cm ^-3 ).     

Formation of Negative Hydrogen Ions in a Ne–H2 Hollow Cathode Discharge

The formation of negative hydrogen ions in a conventional hollow cathode discharge has been investigated. A mixture of Ne and H₂ proved to be more advantageous compared to pure hydrogen. The study has been performed by solving the electron Boltzmann equation, coupled with a system of balance equations for neon and hydrogen neutral and charged particles. The vibrational distribution function of hydrogen has been calculated. Our calculations show unusually high population of vibrationally excited hydrogen molecules in a Ne–H₂ mixture, which explains the high density of negative hydrogen ions under optimal conditions (total gas pressure of few Torr, hydrogen number mole fraction of 1–10% and discharge current of 10–100 mA). Line intensities originating from highly excited neon states vs. hydrogen pressure have been calculated and a comparison with existing experimental results has been made.     

Investigation of glow discharge plasma for surface modification of polypropylene

Material surface properties of polymers, plastics, ceramics and textiles can be modified by atmospheric or low‐pressure glow discharge plasma. The aim of the present work is to study the surface modification of biaxially oriented polypropylene (BOPP) film in order to improve its hydrophilic and wetting properties. In this article we used low‐pressure, low‐temperature oxygen plasma for the surface treatment of BOPP. Scanning electron microscopy indicates that plasma treatment causes mainly physical changes by creating microcraters and roughness on the surface and increasing surface friction. Attenuated total reflectance infrared spectra show oxygen‐containing groups such as ? OH at 3513 cm^?1 and C?O at 1695 cm^?1. Microscopic investigations of water droplets on BOPP (treated, untreated) show that the interfacial adhesion of treated surfaces is increased. Copyright © 2003 John Wiley & Sons, Ltd.     

Kinetic model of a DC oxygen glow discharge

A simple kinetic model predicting the concentration of oxygen atoms, metastable singlet molecules O₂(a ¹) and negative ions O — in the positive column of a DC glow discharge is developed. The calculated O and O₂(a ¹) concentrations are compared to previously reported measurements for pressuresp=0.2–2 Torr and discharge currentsI=10–80 mA. The electron density calculated from the continuity equationj=n _e e v _d agrees well with experiment. The rate coefficients for electron impact processes used in the balance equations of O, O₂(a ¹), and O^– were taken from the literature as a function of the reduced electric fieldE/N forE/N=40–80 Td. A reasonable agreement is obtained between the model and the experiment with a set of 10 reactions for the production and destruction of the above-mentioned species     

甲烷二氧化碳介质阻挡放电转化产物分布研究

针对介质阻挡放电甲烷二氧化碳转化实验,分析了反应的产物分布,探讨了进料组成和反应器结构对反应的影响.反应产物包括:高H2/CO摩尔比的合成气、气态烃、高辛烷值的汽油组分、醇和酸等含氧有机物.对所述电极结构,产物的选择性随碳数增加而降低;高的甲烷进料浓度有利于烃的生成,对醇和酸的最佳甲烷进料体积分数范围在67.4％～75.1％;放电间隙越小,原料转化率和烃、酸的选择性越大,大的放电间隙对醇的生成有利.