一测多评方法应用于高效液相色谱法测定防晒产品中15种防晒剂的含量

选用CAPCELL PAK C18色谱柱为分离柱,柱温为30℃,进样体积为10.0μL,并用不同比例的(A)甲醇、(B)四氢呋喃和(C)0.008 2mol·L^-1高氯酸溶液的混合液作为流动相,按程序梯度洗脱模式对市售防晒产品中所用的15种防晒剂的标准品进行色谱分离,并在波长311nm处进行紫外检测。实样分析时,称取样品0.25g,用甲醇、四氢呋喃、水和高氯酸(体积比为250∶450∶300∶0.2)的混合液(以下简称混合溶剂)15 mL超声提取30 min,用混合溶剂定容至25.0mL,离心10min,分取上清液1.0mL,加入混合溶剂定容至10.0mL,经0.45μm滤膜过滤,取滤液按仪器工作条件进行高效液相色谱分析。结果表明:所测定的15种防晒剂在一定的质量浓度范围内与其对应的峰面积呈线性关系。选定其中的二苯酮-3为参照物,并根据其余14种化合物的质量浓度和峰面积计算了各化合物的相对校正因子和相对保留时间等参数,确定了用一测多评法(QAMS)测定防晒产品中15种防晒剂的条件。还对色谱柱的型号、色谱仪器的型号以及柱温、进样量等对相对校正因子和保留时间可能产生影响的因素进行了系统试验。证明了在选定的色谱柱型号的前提下,用QAMS方法可实现防晒产品中15种防晒剂含量的同时测定。应用QAMS方法测定了6个批次防晒产品中的防晒剂含量,所得结果与用标准曲线法计算的结果基本一致,表明QAMS方法在降低检测成本和节省检测时间方面效果显著。     

激光拉曼光谱在高分子中的应用

论述了激光拉曼光谱对高分子结构、结晶形态和表征,反应动力学过程和取向的研究,还介绍了纵向声学模、共振、高温高压、光波导和付里叶拉曼光谱在高分子研究中的最新进展。     

Ligand-protein docking using a quantum stochastic tunneling optimization method

A novel hybrid optimization method called quantum stochastic tunneling has been recently introduced. Here, we report its implementation within a new docking program called EasyDock and a validation with the CCDC/Astex data set of ligand-protein complexes using the PLP score to represent the ligand-protein potential energy surface and ScreenScore to score the ligand-protein binding energies. When taking the top energy-ranked ligand binding mode pose, we were able to predict the correct crystallographic ligand binding mode in up to 75% of the cases. By using this novel optimization method run times for typical docking simulations are significantly shortened.     

高分子量的枝状聚硅烷的合成与表征

根据硅氢加成反应机理设计了“顺点滴式”工艺 ,高效、低耗地合成了甲基苯乙基二氯硅烷和甲基正己基二氯硅烷 .根据Wurtz还原偶联反应原理 ,采用“预聚”和“混聚”两种工艺分别合成枝状共聚硅烷 ,发现运用“预聚”工艺可以合成分子量很高的枝状聚硅烷 .     

Energy transfer rates and impact sensitivities of two classes nitramine explosives molecules

Some explosives are stable molecules with large energy barriers to chemical reaction, and in shock or impact initiation, a sizable amount of phonon energy must be converted to the molecular internal higher vibrations by multiphonon up pumping. To investigate the relationship between impact sensitivities and energy transfer rates, the number of doorway modes of explosive molecules is estimated by a simple theory in which the rate is proportional to the number of normal mode vibrations. We evaluated frequencies of normal mode vibrations of 13 explosive molecules which are CHNO nitramine-contained and have not been analyzed previously. The number of doorway modes in the regions of 200–700 cm⁻¹ was evaluated by the direct counting method. For more clear investigation of the relationship we have classified these 13 nitramine explosive molecules, by the number of nitramine group they contained, into two groups. There are eight molecules that contained one nitramine group and five molecules that contained poly-nitramine groups. It is found that the number of doorway modes shows a linearly correlation to the impact sensitivities derived from drop hammer tests. This result is in agreement with that of several previous works. Besides, it is also noted in our study that in those nitramine explosives molecules with similar molecular structure (similar number nitramine group they contained) and similar molecular weight, the correlation between the sensitivity and the number of doorway modes is higher. We found that the vibrational frequency of ω corresponds to nitro group motions of every molecule is contributed to the number of doorway modes in the regions of 200–700 cm⁻¹.     

Probing buried carbon nanotubes within polymer-nanotube composite matrices by atomic force microscopy

Multi-walled carbon nanotubes (MW-CNT) inside a polyamide-6 (PA6)-MW-CNT composite were visualized by atomic force microscopy (i) in a field-assisted intermittent contact and (ii) in the tunneling (TUNA) mode. Individual buried MW-CNTs were clearly discerned within the PA6 matrix. An average diameter of 33 ± 5 nm of the MW-CNTs was determined based on field-assisted intermittent contact mode AFM images, which is consistent with the expected size of PA6-coated MW-CNTs. Single well dispersed MW-CNTs that are located in the sub-surface region of the composite were also observed in the TUNA mode. These new AFM approaches circumvent the tedious sample preparation based on ultramicrotoming required for high resolution electron microscopy studies to obtain “in-depth” morphological information and hence are expected to facilitate the analysis of CNT-based and other nanocomposites in the future.     

Fast spatially localised electrooptical mode in vertically aligned nematic LCs with negative dielectric anisotropy

ABSTRACT

Electro-optical switching and the liquid crystal (LC) director distribution are studied in spatially periodic electric field for vertically aligned LC with negative dielectric anisotropy. Two electro-optical switching modes characterised by different switching times are observed. These modes are well distinguished optically by choosing proper geometry for the polarisers axes orientation. One of these modes is significantly faster as compared to the other. The fast switching is explained in terms of localised near-to-surface director reorientation. The 3D-numerical simulation shows very good agreement with the experiment: it points out the existence of the disclination lines and field-stabilised walls responsible for the localised director field switching and its relaxation. Possibilities of enhancing the fast mode for high-speed light modulators are discussed.     

白杨素-6-磺酸钠及其Zn(Ⅱ)、Ca(Ⅱ)配位化合物与NDA作用的研究

采用紫外、荧光、粘度法研究了白杨素-6-磺酸钠、白杨素-6磺酸双核锌及白杨素-6-磺酸四核钙与小牛胸腺DNA的结合常数分别是KNa=1.52×104L.mol-1、KZn=3.56×104L.mol-1和KCa=1.54×104L.mol-1。实验结果表明,白杨素-6-磺酸双核锌和白杨素-6-磺酸四核钙;白杨素-6-磺酸钠与DNA间的作用方主要为静电结合。     

旋转输液管动力稳定性理论分析北大核心CSCD

基于Lagrange原理和假设模态法建立了旋转输液管的动力学模型.通过降阶升维的方法求解系统的特征值问题,并分析了旋转输液管自由振动特性.得到了不同端部集中质量和转速下,系统特征值随流速升高的演变轨迹.揭示了临界流速随系统参数的变化规律.研究发现,内部流体的流动对旋转输液管动力学特性存在显著影响.在某些参数组合下,系统低阶模态能够形成不同形式的内共振关系.预示了旋转输液管模型蕴含丰富的动力学现象.     

价格与质量双重竞争下电商平台渠道模式决策研究

近年来传统电商正加速从经销商转变为连接消费者与供应商的在线市场中间商, 电商平台与供应商形成三种渠道结构:经销商模式、混合模式和在线市场模式。本文通过构建Stackelberg博弈模型讨论产品质量与价格双重竞争情境下电商平台与供应商销售合作模式最新选择问题。研究表明,当价格竞争强度适中而佣金比例较大时,混合模式是电商平台最优选择,此时产品质量差异最大;当价格竞争强度较小而佣金比例较大时,在线市场模式则是最优选择;在其他条件下,经销商模式是其最优选择。本文结论对电商平台与供应商合作模式选择、产品质量与定价决策具有参考价值。