压电材料反平面应变状态的任意形状夹杂问题

应用复函数的Ｆａｂｅｒ级数展开方法，分析了含任意形状夹杂的压电材料反平面应变问题，给出了问题的复势函数解。利用这个解，具体讨论了椭圆形夹杂及其极限（几何方面与物理方面）问题。并给出了三角形、正方形夹杂的近似结果。其特例结果与早期工作一致     

纳秒激光在铜靶材中诱导冲击波的实验研究

基于聚偏二氟乙烯压电传感器, 对铜靶材中纳秒激光脉冲诱导的冲击波传播过程进行了实验研究, 给出了铜靶材内冲击压强随激光脉冲能量和靶材厚度的变化规律. 实验结果表明: 500 mJ激光脉冲能量作用到2 mm厚的铜靶材产生的冲击压强达到2.1 MPa; 激光脉冲能量从200 mJ 增加到500 mJ, 在铜靶材厚度为2和4 mm条件下, 冲击压强分别增加了162%和231%; 而当铜靶材厚度从2 mm增加到6 mm时, 在400和500 mJ激光脉冲能量作用下, 铜靶材内冲击压强分别降低了32%和49%.     

基于单片机控制的超声波换能器设计与实现

为了提高超声波换能器电源的智能性和通用性,本文提出了一套以高性能ds PIC30F4011单片机为控制核心的换能器电源解决方案,并进行了相关的软硬件设计。该方案基于键盘输入选择标称频率拓宽了换能器的标称频率选型范围;基于最大电流法检测谐振点设定最佳频率保证了换能器电声转换的高效性;基于电压反馈检测调整输出电压和保持换能器的功率稳定,主要检测过程采用软件实现。实验结果证明采用该方案的超声波换能器电源具有现实可行性。     

第三讲让声纳系统耳目一新:新型水声换能器与换能器新技术

文章综述了新型水声换能器设计与换能器新技术的重要进展.主要涉及：稀土超磁致伸缩材料、弛豫铁电材料、压电聚合物薄膜等新材料的发展及其水声换能器的新设计,基于新结构的新型水声换能器,利用不同能量转换机理的新型水声换能器,宽带换能器新技术等等;对于接收型换能器着重介绍了光纤水听器和矢量水听器.     

原子沉积台控制系统实验研究

研究了以稳定F-P腔腔长来控制原子沉积台与驻波光场之间相对位置的稳定性。在简要分析F-P腔工作原理的基础上,设计了F-P腔腔长锁定反馈控制系统。该系统以633nm稳频激光作为基准光源,通过光电转换、调制与解调、比例积分等控制环节,实现了将F-P腔的谐振频率锁定到基准光源的频率上。实验结果表明,锁定后的F-P腔腔长的稳定度达到了10-8以上,可满足原子光刻技术中对沉积台与驻波光场相对位置稳定的应用要求。     

Buckling and post-buckling of piezoelectric plates using finite element method

The finite element equations considering the geometrical nonlinearity of piezoelectric smart structures are derived based on the total Lagrange method under the assumption of weak coupling between electricity and mechanics. Buckling and post-buckling of piezoelectric-plate with various boundary conditions are investigated. The calculated results show that piezoelectric effects and external voltage can hardly affect the buckling and post-buckling characteristics of piezoelectric-plate under uniaxial pressure while the buckling caused by displacement in-plane has much to do with the electric field. The present work is supported by the National Natural Science Foundation of China (No. 59635140).     

Finite-automaton transformations of strictly almost-periodic sequences

Different versions of the notion of almost-periodicity are natural generalizations of the notion of periodicity. The notion of strict almost-periodicity appeared in symbolic dynamics, but later proved to be fruitful in mathematical logic and the theory of algorithms as well. In the paper, a class of essentially almost-periodic sequences (i.e., strictly almost-periodic sequences with an arbitrary prefix added at the beginning) is considered. It is proved that the property of essential almost-periodicity is preserved under finite-automaton transformations, as well as under the action of finite transducers. The class of essentially almost-periodic sequences is contained in the class of almost-periodic sequences. It is proved that this inclusion is strict.     

A penny-shaped crack in a transversely isotropic piezoelectric solid: Modes II and III problems

An exact analysis of the modes II and III problems of a pennyshaped crack in a transversely isotropic piezoelectric medium is performed in this paper. The potential theory method is employed based on the general solution of three-dimensional piezoelasticity and the four harmonics involved are represented by one complex potential. Previous results in potential theory are then utilized to obtain the exact solution that is expressed in terms of elementary functions. Comparison is made between the current results with those published and good agreement is obtained. The project supported by the National Natural Science Foundation of China (No. 19872060)     

聚合物电导率对0-3型压电复合材料极化性能的影响

建立了0-3型压电复合材料的等效电学模型.分析了聚合物电导率对复合材料极化性能的影响，研究了聚苯胺改性0-3型锆钛酸铅/聚偏氟乙烯复合材料极化性能与聚合物电导率之间的关系.理论分析和实验结果均表明，提高聚合物电导率可以提高复合材料的极化性能. 关键词： 压电复合材料 电导率 极化 聚偏氟乙烯