排序方式: 共有20条查询结果,搜索用时 20 毫秒
11.
12.
13.
利用LS-DYNA3D软件,对有攻角条件下伸出式侵彻体侵彻单层靶板及等厚度双层间隔靶板进行了数值模拟研究,从靶后动能和靶板破坏程度的角度对比了伸出体与同质量、同外径的基准杆侵彻单/双层靶板的能力。得出了侵彻体动能随时间变化的规律,分析了侵彻过程中攻角、速度及靶板分层3个重要因素对侵彻体侵彻能力的影响。结果表明:当攻角小或速度大时,伸出式侵彻体相对基准杆有较明显的优势;当双层靶板的间隔与基准杆长度相等时,靶板的分层对伸出体的侵彻性能几乎无影响,而对基准杆有较大影响,说明伸出体侵彻多层间隔防护结构的能力明显优于基准杆。 相似文献
14.
15.
以长杆弹垂直侵彻半无限厚靶板为研究对象,分析了弹体最大侵彻深度与入射速度的关系,研究了弹体入射速度对侵彻最大深度的影响规律。研究表明:靶板的强度和界面效应使弹体在侵彻过程中存在一个临界速度,当入射速度大于临界速度时,弹体的侵彻才能通过开坑阶段进入准稳定阶段,它是造成当入射速度较小时侵彻深度随入射速度的提高而几乎不变或缓慢增加的主要原因;准稳定侵彻过程中弹体速度和侵彻速度基本不变,并且两者存在线性关系,这种关系只与弹体和靶板的材料性能有关,是造成当入射速度较大时侵彻深度随入射速度的提高呈快速线性增大的主要原因。 相似文献
16.
17.
钨合金长杆弹侵彻半无限钢靶的数值模拟及分析 总被引:7,自引:0,他引:7
利用显式动力有限元程序ANSYS/LS=DYNA,采用ALE方法和Steinberg本构模型,对钨合金长杆弹侵彻半无限厚钢靶进行了数值模拟,给出了侵彻过程4个阶段的完整图像和相关物理量的时程变化曲线,分析了弹、靶的压力分布、质点速度以及材料的流动特性。结果表明:在较大速度范围内,模拟计算的侵彻深度与实验结果吻合得很好;沿侵彻轴线,弹靶交界面附近的材料行为主要由静水压力控制。 相似文献
18.
19.
Modeling on mass abrasion of kinetic energy penetrator 总被引:1,自引:0,他引:1
An engineering model on mass abrasion of kinetic energy penetrator is presented to predict the nose shape and mass loss of the residual projectile after high-speed penetration into concrete. The experimental analysis indicates that the kinetic energy of penetrator (i.e., mass and velocity of projectile) and the hardness of aggregate of concrete significantly affect the mass abrasion of projectile. A theoretical upper limit exists for the mass loss. More general relationship between mass loss and impact function I of projectile is constructed. Graphical discussion declares that the most mass loss occurs on the nose of the projectile and the eroding nose approaches to an ogival shape with a smaller value of caliber-radius-head (CRH). A relative rate of mass abrasion on ogive-nose is further defined and analyzed. The mass loss from abrasion on kinetic energy (KE) penetrator may be evaluated through the variation of nose shape. 相似文献
20.