Separation of screw-sensed particles in a homogeneous shear field

The Stokes motions of three-dimensional screw-sensed slender particles in a homogeneous shear field are investigated, including the effects of buoyancy. Conclusions are drawn about the possibility of achieving a separation of mixtures of right- and left-handed particles. The linearity of the Stokes equations allows complex flows to be solved by adding the effects of the several terms which describe the flow in which the particle is immersed. The homogeneous shear flow considered here consists of three such terms; solutions for a series of 12 unit motions are sufficient to determine the hydrodynamic resistance tensors. The forces and torques experienced by screw-sensed particles are calculated from these 51 resistance tensors, using slender-filament theory. The results allow an estimate of the range of buoyancy parameters for which gravitational sedimentation can be neglected. The fundamental component of the particle motion is a rotation, at approximately the same angular velocity as that of the fluid. Superimposed on this are variations, of large period, in the particle orientation. A phase plane analysis is used to find the terminal orientations. Very long calculation times are required for the phase portrait. An approximate method based on azimuthally-averaged equations is developed to avoid the requirements for long time integration.     

Light scattering by groups of spherical particles

Light scattering by groups of spherical particles is considered. It is shown that the structure of the groups and their orientational distribution can be judged from the spectrum and polarization of the scattered light. Syktyvkar State University, 55, Oktyabr'skii Ave., Syktyvkar, 167001, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 2, pp. 228–231, March–April, 1997.     

转动喇曼散射截面的群论计算

本文利用群链U(4)U(3)O(3)描述双原子分子N_2和O_2振转谱的对称性质,并利用群论方法计算了N_2和O_2分子转动喇曼散射的跃迁矩阵元,给出了它们的转动喇曼散射的截面。结果与实验较好地符合。     

烃类烟粒红外复折射率的测定与应用

测定了室温下烃类(乙炔、乙烷)烟粒的红外复折射率,并讨论了所获数据在测量烟浓度与烟粒大小分类、计算光谱吸收系数及在特定浓度与温度下评估烟雾辐射率方面的应用。     

AFM, SEM and GIXRD studies of thin films of red polycarbazolyldiacetylenes

In this paper we report the results of a morphological and structural investigation on film properties of a soluble polydiacetylene, the poly[1,6-bis(3,6-dihexadecyl-N-carbazolyl)-2,4-hexadiyne] (polyDCHD-HS). The red films of this polymer, prepared by standard spin-coating techniques, revealed absence of linear dichroism and birefringence in contrast with the ordered mesophases detected by powder X-ray studies. In order to interpret the optical behavior of this polymer, we performed AFM and SEM studies of polyDCHD-HS films spun on hydrophylic and hydrophobic glass substrates. We found the presence of surfaces organized in rod-like particles, more regularly oriented on the hydrophylic substrate. GIXRD studies, carried out on films sufficiently thick to allow the observation of the diffraction pattern, reveled the presence of a lamellar structure with a spacing of 3.22 nm. The low intensity of the diffraction peaks and the isotropic linear optical properties of the films show that the lamellar mesophases are not extended over large areas. These findings were compared with the data obtained from AFM and SEM studies on films of two other polydiacetylenes, the poly[1-(3,6-dihexadexyl-N-carbazolyl)-6-(N-carbazolyl)-2,4-hexadyine] (polya-DCHD) and the poly[1,6-bis(3,6-dipalmitoyl-N-carbazolyl)-2,4-hexadyine] (polyDPCHD), spun on hydrophylic glass substrate. The results confirmed the presence of nodular morphologies which seem to be a general characteristic of this class of materials. The particles organization appears instead related to the chemical nature of the substituents on the carbazolyl rings.     

The lay-out of the photon collider at the international linear collider

One of the interaction regions at the linear colliders should be compatible both with e ⁺ e ⁻ and γγ, γe modes of operation. In this paper, the differences in requirements and possible design solutions are discussed.      

Surface elastic properties of Si decorated with Ni nanostructures

Brillouin spectroscopy was used to study elastic properties of the Si (1 1 1) decorated with Ni nanostructures deposited by nanospherical lithography. The height of the nickel nanostructure deposited was about 25 nm, while the area taken by the structure differed depending on the type of matrix used. It was found that the Ni nanostructures change the velocity of both bulk and surface phonons in the systems studied. This finding is in contradiction to the results concerning the surface phonons velocities in different media covered with a homogenous thin metal film, in which the effect was observed for films thicker than 70 nm.     

Insight into chain dimensions in PEO/water solutions

Small‐Angle Neutron Scattering has been performed from poly(ethylene oxide) in deuterated water at temperature ranging from 10 to 80 °C. A simple fitting model was used to obtain a correlation length and a Porod exponent. The correlation length L characterizes the average distance between entanglements in the semidilute region and is proportional to the individual coil sizes in the dilute region. L was found to increase with temperature in the semidilute region but it decreases with temperature in the dilute region. This decrease is the precursor to the single‐chain collapse which applies to very dilute polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2196–2200, 2007     

On acoustic and electric waves diffraction in piezoelectric medium by a permeable half-plane crack

The problem of electric and acoustic waves diffraction by a half-plane crack in a transversal isotropic piezoelectric medium is investigated. The crack is assumed to be electric permeable and free of tractions. The so-called “quasi-hyperbolic approximation” [15] is adopted. Applying Laplace transformations and Wiener–Hopf technique a closed form solution is obtained. By the means of Cagniard–de Hoop method a detailed dynamic full electroacoustic wavefield’s investigation is conducted. Mode conversion between electric and acoustic waves, effect of electroacoustic head wave, Bleustein–Gulyaev surface wave and the wavefield structure depending on the type of the incident wave (acoustic or electric) and its angle of incidence are analyzed in details. The dynamic field intensity factors at the crack tip depending on the angle of incidence and on time are derived explicitly. Numerical analysis is presented.     

Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007