Irreversible and reversible phase transitions of alkyl monolayers. Gas chromatographic evidence of polar solvent influence on the adsorbing properties of the layer

Summary Further to Gilpin's observations in liquid chromatography of the irreversible transformation of alkyl grafts, following the replacement of an organic mobile phase by an aqueous one, we describe some gas chromatographic experiments which lead to similar (log V_s, I/T) plots, as a consequence of the same solvent release process.We use paraffin films on siliceous supports or hydroxylated liquid substrates or C₂₂-alkyl bonded silica. These experiments demonstrate that this irreversible transition and the melting-like reversible transition are completely different phenomena. They confirm the existence of at least three kinds of monomeric alkyl films.     

一种纳米蜡乳液的制备及应用研究

研究了一种纳米蜡乳液的制备方法。通过测试证明该体系稳定,得到平均粒径为57.6nm大小的纳米蜡乳液,可代替各种行业中使用的普通蜡乳液,如皮革[1]、纺织[2]、造纸[3][4]等行业·     

A thorough study of the surface wax of apple fruits

The composition of the surface waxes of three apple ( Malus domestica L.) cultivars ("Florina", "Golden B" and "Ozark Gold") has been studied by means of spectroscopic and GC–MS analysis of the class-fractionated mixture of components. Odd n -alkanes, mainly C₂₇ and C₂₉ molecules, are prevalent in the saturated fraction. Small concentrations of alkenes were also found; the C_28:1 component is strongly (72%) in excess over the other 1-alkenes. Straight-chain esters (mainly of palmitic acid) of saturated primary alcohols (C₁₈–C₃₀) were also detected; whereas the acyl moiety is made up essentially of an even number of carbons, the alcohol counterpart does not exhibit this characteristic. Aldehydes are present (C₂₀–C₃₀) with the homologue patterns C₂₆–C₃₀ most strongly represented. Straight-chain free secondary alcohols characterize the waxes of "Florina" and "Ozark Gold"; the hydroxy function is located far from the extremity of the carbon framework. Outstanding is the presence of three alcohols with 29 carbon centres. These alcohols are accompanied by free straight-chain primary alcohols, mainly with even-numbered carbon chains in the range C₂₆–C₃₀. Free fatty acids are present; all of have a framework of even-numbered carbon chains mainly in the range C₁₆–C₂₀. C_18:1 (oleic acid) is well represented.     

Comparative methods in the determination of wax content and pour points of crude oils

In this research, differential scanning calorimetry (DSC) and gas chromatography is used to determine the wax content of fourteen crude oils of different sources. Different empirical equations were applied to compare the wax content of crude oils. For the fourteen crude oil samples with the wax content ranging from 7.5 to 43.8 mass%, it was observed that the results of empirical equations were in good agreement with those determined by DSC and GC. Accordingly, a correlation between ASTM pour point and the temperature at which 2 mass% of wax has precipitated out from crude oil is developed.     

A History of Fischer-Tropsch Wax Upgrading at BP—— from Catalyst Screening Studies to Full Scale Demonstration in Alaska

Conversion of Fischer-Tropsch wax into high quality synthetic crude or finished transportation fuels such as premium diesel has been studied over the past 15 years within BP. Catalyst screening and selection was carried out in dedicated micro-reactors and pilot plants, whose designs are critical to the performance selection. Variation in catalyst composition and defining the gas to oil feed ratios with the operating temperature are a few of the parameters studied. Product selection and maximizing diesel yield combined with stability (catalyst life) were the ultimate drivers. The selected catalyst was then tested under commercial conditions in a dedicated 300 barrel per day demonstration plant. The products were also tested in engines to assess their combustion characteristics.     

Preparation of a novel infrared low-emissive coating from the Cu powder modified by the polyethylene wax

Cu powder was coated with polyethylene wax via the flux-capping method in hope to avoid the oxidation of it, so the increment of the infrared emissivity of the coating can be greatly reduced. The prepared product was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The infrared emissivity of the prepared material was measured by Infrared Emissometer. The influence parameters that will affect the emissivity of the coating were systematically investigated, such as the content of coated Cu powder, coating fineness, coating thickness and aging process. The results indicated that the infrared emissivity value of the coating was reduced after Cu powder was coated with polyethylene wax. The polyethylene wax/Cu composites presented a homogenous sheet structure when the content of Cu powder increased to 30 wt.%, and it has a lower emissivity. The infrared emissivity of the coating increases rapidly as thickness increases and becomes steady above thickness of 70 μm. The composite coating exhibits lower emissivity value and excellent physical properties at coated Cu content of 20 wt.%. The emissivity of the coating that was prepared from the modification of the Cu powder was decreased with the decrement of the grinding fineness and increased with the aging time. The emissivity of the coating that was prepared from the modification of the Cu powder is always lower than that of the coating that only composed of the Cu powder with the increment of the aging time. Therefore, it can be concluded that the anti-oxidation of Cu powder is greatly improved after it was modified by polyethylene wax, which results in a novel coating with long-run low emissivity.     

Development of a manual method for the determination of mineral oil in foods and paperboard

So far the majority of the measurements of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) were obtained from on-line high performance liquid chromatography–gas chromatography–flame ionization detection (on-line HPLC–GC–FID). Since this technique is not available in many laboratories, an alternative method with more easily available tools has been developed. Preseparation on a small conventional liquid chromatographic column was optimized to achieve robust separation between the MOSH and the MOAH, but also to keep out the wax esters from the MOAH fraction. This was achieved by mixing a small portion of silica gel with silver nitrate into highly activated silica gel and by adding toluene into the eluent for the MOAH. Toluene was also added to the MOSH fraction to facilitate reconcentration and to serve as a keeper preventing loss of volatiles during solvent evaporation. A 50 μl volume was injected on-column into GC–FID to achieve a detection limit for MOSH and MOAH below 1 mg/kg in most foods.     

Synthesis of Some Additives and Study Effect of Gas Oil Composition on Flow Properties

Nine additives were prepared by esterification of dibasic acid (succinic, adipic, sebacic acid) and polyethylene glycol (Mol.wt.=600, 1000, 4000). These additives were characterized by infrared spectral analysis, average molecular weight and polydispersity index. Their influence on the depression of pour point for two type of paraffin gas oils (G1 and G2) were investigated, blends of paraffin gas oils G1 and G2 by different ratio, when their untreated and treated by additives were evaluated as pour point depressant in comparison with the original paraffin gas oils G1 and G2.

The effect of additive type and gas oil composition on wax crystal modification were studied using the photo micrographic analysis. Diethoxylate (eo=182) sebacate with blend gas oil No. 3 has achieved the best performance as pour point depressant. The photo micrographic analysis showed that, the wax morphology was greatly modified to fine dispersed crystals of compact size. A correlation between the pour point depression and the extent of wax modification was detected.     

Rheological Properties of Model and Crude Oil Systems when Wax Precipitate under Quiescent and Flowing Conditions

Wax precipitation and deposition is a recurring challenge in transportation of crude oil, and increased knowledge about the behavior of such systems is necessary. Microscopy and differential scanning calorimetry were used to follow the crystallisation of wax for two model systems. The amount of solid was also determined by the latter method as well. The flow and viscoelastic behavior were investigated around the wax precipitation temperature, and the yield stress was determined both after dynamic and static cooling. Interpretation of the results was carried out in view of crystal growth and microstructure of the wax crystals. The variables that were studied were wax composition, amount of wax and thermal and shear history.     

Nelumbo nucifera leaves as source of water-repellent wax: Extraction through polar and non-polar organic solvents

Nelumbo nucifera leaves are rich source of natural wax possessing super-hydrophobic properties. It provides protection to them from ecological turbulences and climatic wear and tear. In this study, various experiments have been conducted to observe the yield of extraction and the determination of various functional groups, which are present in natural wax, derived from Nelumbo nucifera leaves. The natural wax has been extracted from lotus leaves through non-polar (hexane) and polar (ethanol) solvent via different extraction methods. The superhydrophobic wax has been successfully extracted with hexane. Whereas, ethanol did not extract the water-repellent wax of lotus leaf. Considering the cumulative amount, i.e. (desired + undesired), the maceration shows the extraction of 2.9% (%w/w, through hexane) and 10.2% (%w/w, through ethanol), while it was found 2.5% (%w/w, cycle period 15 min) and 9.0% (%w/w, cycle period 26 min) respectively, in case of Soxhlet extraction technique. For this specific case of natural wax recovery from biomass (lotus leaf), the maceration (traditional method) resulted a little bit superior extraction yield in comparison to the Soxhlet extraction method for extraction of crude wax. In the case of non-polar solvent (hexane), an extraction yield of 1.97% (%w/w) through maceration method was observed while in the case of non-polar solvent (ethanol), an extraction yield of 1.62% (%w/w) through Soxhlet extraction was observed. The TLC analysis on both types of extracts was performed. For the detection of various hydrocarbon chains in the crude wax extracts, FTIR was also performed. Topography of wax surface and wax-coated waterproof fabric was compared through SEM.