应用高分子铂络合物催化合成硅烷偶联剂

以二氧化硅为载体的侧链上含有配位基团和-COOH的聚硅氧烷(1-5)分别与氯铂酸反应制备了五种聚硅氧烷-铂络合物(“St-Pt-l”—“St-Pt-5”).这些高分子铂络合物,用于催化环氧丙基烯丙基醚与三甲及基氢硅烷反应具有很高的催化活性,在温和的条件下(80℃,30min),反应以72—98％的产率生成了硅烷偶联剂γ-(2,3-环氧丙氧基)丙基三甲氧基硅烷.通过对含,配位基的高分子铂络合物“Si-Pt-1”的稳定性研究,发现它可以重复使用多次而不降低其催化活性.     

纳米级TiO2粉体的制备研究——Ⅱ.絮凝剂及其浓度的影响

采用溶胶-凝胶-超临界流体干燥(SCFD)法制备纳米级TiO₂超细粉，详细考察了不同絮凝剂及其浓度对TiO₂织构和结构性质的影响。结果表明，利用强碱溶液作为絮凝剂，浓度为5 mol·L^-1是制备大孔高比表面TiO₂超细粉较为适宜的条件。     

Crystallization of polymers in variable external conditions

General equations of crystallization in variable conditions derived in the former paper [1] have been applied to non-isothermal crystallization of unstressed and unoriented polymers. Crystallization rate involving transient and athermal effects is controlled by temperature,T, and cooling rate,. Experimental procedures leading to determination of three temperature-dependent material functions: steady-state crystallization rate,K _st(T), relaxation time, (T), and athermal nucleation function, Z(T), are outlined.     

核磁共振法研究CH2=CHSi（OET）3的水化反应

高强水泥的生产近年来巳成为许多国家发展水泥生产的一个主要方向。在水泥中加入有机单体可以改善混凝土的质量,如加重量比为3％的有机硅烷偶联剂乙烯基三乙氧基硅烷CH_2=CHSi(OEt)_3(简称VTES)于水泥中,即可在较大程度上增加水泥石的强度。     

A competitive particle nucleation mechanism in the polymerization of homogenized styrene emulsions

The effects of concentrations of surfactant (sodium lauryl sulfate [SLS]) and initiator (sodium persulfate [SPS]) on the polymerization of homogenized styrene emulsions, stabilized by SLS/lauryl methacrylate (LMA) or SLS/stearyl methacrylate (SMA), were studied. The rate of polymerization increases with increasing [SLS] or [SPS]. In addition to monomer droplet nucleation, the formation of particle nuclei in the aqueous phase (homogeneous nucleation) plays a crucial role in the polymerization kinetics. In comparison with the LMA containing polymerization system, monomer droplet nucleation becomes more important when the more hydrophobic SMA was used as the costabilizer. Furthermore, the degree of homogeneous nucleation increases with increasing [SPS].     

Synthesis and anticholinesterase activity of some new fluorogenic analogues of organophosphorus nerve agents

Eighteen new fluorogenic analogues of organophosphorus nerve agents were synthesised and characterised. They included analogues of tabun, sarin, cyclosarin, soman, VX, and Russian VX, with the 7-oxy-4-methylcoumarin or 7-oxy-4-(trifluoromethyl)coumarin leaving group. These analogues inhibited acetylcholinesterase (AChE) effectively in vitro and therefore have potential as tools for the identification of novel organophosphatases in biological systems. Analogues of VX and Russian VX with the 7-amino-4-methylcoumarin group, although poor AChE inhibitors, may have utility for screening enzyme libraries for phosphoramidases capable of cleaving P-N bonds.     

Immobilization,characterization, and laboratory-scale application of bovine liver arginase

Arginase isolated from beef liver was covalently attached to a polyacrylamide bead support bearing carboxylic groups activated by a water-soluble carbodiimide. The most favorable carbodiimide wasN-cyclohexyl-Nt’-(methyl-2-p-nitrophenyl-2-oxoethyl) aminopropyl carbodiimide methyl bromide, but for practical purposes,N-cyclohexyl-Nt’-morpholinoethyl carbodiimide methyl tosylate was used. The optimal conditions for the coupling procedure were determined. The catalytic activity of the immobilized arginase was 290–340 U/g solid or 2.9–3.4 U/mL wet gel. The pH optimum for the catalytic activity was pH 9.5, the apparent temperature maximum was at 60°C and K_mapp was calculated to be 0.37M L-arginine. Immobilization markedly improved the conformational stability of arginase. At 60°C, the pH for maximal stability was found to be 8.0. The immobilized arginase was used for the production of L-ornithine and D-arginine.     

Homogeneous crystallization of the Lennard-Jones liquid. Structural analysis based on Delaunay simplices method

The crystallization process of a simple liquid upon slow cooling has been modeled by the Monte-Carlo method. The model contains 10,000 Lennard-Jones atoms in the model box with periodic boundary conditions. The model structure is investigated at different stages of crystallization using Delaunay simplices. The simplex belonging to one or another particular crystal structure was determined by the shape of the given simplex taking into account the shape of its neighboring simplices. Simplices typical of the fcc and hcp crystal structures, as well as of polytetrahedral aggregates, not typical of crystals, were studied. The analysis has shown that the “precursors” of a hcp structure are strongly dominating over the “precursors” of a fcc structure in liquid phase before the beginning of crystallization. When crystallization starts, small embryos of the fcc structure are observed; the simplices peculiar to hcp are present at that in great amount, but they are distributed over the sample more uniformly. As crystallization proceeds, the portion of the fcc phase grows faster than hcp. However, no unified crystal appears in our case of slow cooling of the model. A complex polycrystalline structure containing crystalline regions with multiple twinning, pentagonal prisms and elements of icosahedral structures arises instead.     

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.