EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.     

二氧化碳加氢直接合成二甲醚催化剂的研究 Ⅰ. 沉淀剂对催化剂结构和性能的影响

使用不同沉淀剂制备了CuO-ZnO-Al2O3/HZSM-5复合型催化剂，考察了其对CO2直接加氢的催化性能，并采用H2-TPR、XRD、BET、CO2-TPD、H2-TPD等表征方法对催化剂物化性质进行了表征。研究结果表明，沉淀剂对催化剂的反应性能、晶相结构、还原难易程度、以及对CO2、H2的吸附性能等均有显著影响。催化剂上存在两种吸附位，催化剂的活性、选择性与其吸附性能密切相关。研究结果可以较好地解释CO2直接转化为甲醇和二甲醚的反应机理。     

Solidification of metallic tin in dispersed phase

Differential scanning calorimetry (DSC) and particle size measurements were carried out on disproportionation products of pure SnO to investigate the fusion and solidification behaviour of Sn droplets and their catalytic nucleation on Sn oxides. If disproportionation reaction takes place at T ≥ 798 K, the products are metallic Sn and SnO₂; but for 523 < T < 798 K, SnO₂ is replaced by an intermediate oxide (IO) Sn_xO_(1+x). On melting, samples with IO show a drop of melting point of metallic tin due to Gibbs–Thomson effect; no lowering of melting point was observed in samples with SnO₂. On the other hand, if solidification occurs in the presence of IO, Tin droplets always displayed three distinct exothermic solidification peaks, but if it takes place in the presence of SnO₂, only one exothermic peak is observed. Undercooling values and contact angles were determined for each of the heterogeneous nucleation processes. The different behaviour of metallic Tin droplets was related to the different lattice symmetry of SnO₂ and IO, which act as nucleation catalysts.     

分光光度法同时测定中草药中的钼和铜

本文建立了在混合显色剂（ＰＦ＋ＰＡＮ）的胶束体系中，利用分光光度法同时测定中草药中的钼和铜。实验表明：在混合体系中，钼量在０～１０μｇ／２５ｍＬ，铜量在０～５０μｇ／２５ｍＬ的范围内符合比尔定律，ε′Ｍｏ＝９．２×１０４Ｌ·ｍｏｌ－１·ｃｍ－１；ε′Ｃｎ＝１．５×１０４Ｌ·ｍｏｌ－１·ｃｍ－１。该法用于中草药样品的分析，结果满意，回收率可达９２～１１１％。     

离子色谱法测定电镀锡溶液中的SO42-

采用络合反应，消除电镀锡溶液中金属离子对分离柱的污染，应用离子色谱法检测电镀液中SO4^2-的含量，回收率为95％－104％。     

Chiral resolution of diphenylalanine by high-performance liquid chromatography on a crown-ether-based chiral stationary phase and by NMR spectroscopy

Summary The enantiomers of diphenylalanine (DPA) were well separated by chiral HPLC and NMR spectroscopy on the chiral stationary phase (CSP) derived from (18-crown-6)-2,3,11,12-tetracarboxylic acid (18-C-6-TA). The chromatographic parameters such as separation factors and retention times were greatly influenced by the mobile phase conditions. The (+)-18-C-6-TA used in the CSP was also employed as a chiral solvating agent for the enantiodiscrimination of the DPA enantiomers by NMR spectroscopy. The proton of the DPA analyte showing the chemical shift nonequivalences was used in determining the enantiomeric composition of the analyte.     

Particle nucleation and monomer partitioning in styrene O/W microemulsion polymerization

Particle nucleation in the polymerization of styrene microemulsions was found to take place throughout the polymerization as indicated by measurements of the particle number as a function of conversion. A mechanism based on the nucleation in the microemulsion droplets was proposed to explain the experimental findings although homogeneous nucleation and coagulation during polymerization were not completely ruled out. A thermodynamic model was developed to simulate the partitioning of monomer in the different phases during polymerization. The model predicts that the oil cores of the microemulsion droplets were depleted early in the polymerization (4% conversion). Due to the high monomer/polymer swelling ratio of the polymer particles, most of the monomer resides in the polymer particles during polymerization. The termination of chain growth inside the polymer particles was attributed to the chain transfer reaction to monomer. The low n? (less than 0.5) of the microemulsion system was attributed to the fast exit of monomeric radicals.     

Nucleation of the β-modification of isotactic polypropylene

The effects of the organic pigments C.I.P. RED 177 and C.I.P. Yellow 83 as nucleating agents on the crystallization of polypropylene were studied by DSC. The anthraquinone pigment exerted a significant effect, resulting in structural modifications with lower melting point, and particularly the -modification. The DSC curves exhibit four transition regions, with the following temperature intervals: I. 415–417 K, II. 423–425 K, III. 430–432 K and IV. 438–439 K. For evaluation of the -nucleation effect of pigments, the ratio (H ₁+H ₂)/(H ₃+H ₄) was suggested.     

CaCO3/PEEK复合体系的力学行为和热行为研究

以聚醚醚酮和碳酸钙复合体系为研究对象,考察了偶联剂和填料添加量对复合材料力学行为和热行为的影响.发现磺化聚醚醚酮作为偶联剂能有效地改善材料的力学性能,提高基体树脂的玻璃化转变温度,降低基体树脂的熔点,有助于改善聚醚醚酮的加工条件