作大运动弹性薄板中的几何非线性与耦合变形

导出作大范围刚体运动弹性薄板包括了几何非线性和中面变形之间的相互耦合（耦合变形）的动力学控制方程．分析了几何非线性和耦合变形各自对系统动力学性质的影响,得到了在传统方法上只考虑几何非线性,系统将通过同宿轨分岔过渡到混沌运动;若在传统方法上考虑耦合变形,系统稳定且数值解收敛,与实际情形相符．     

复合材料结构几何非线性分析

本文采用退化的等参壳元分析了复合材料板、壳结构的几何非线性特性。数值计算表明：与各向同性材料不同,即使在很小的载荷和挠度下,几何非线性对复合材料结构的影响也是相当显著的。     

Fabrication of PbS Nanoparticles Embedded in Silica Gel by Reverse Micelles and Sol-Gel Routes

PbS doped-silica gels showing a visible absorption onset were prepared by the sol-gel method. PbS nanoparticles with strong quantum-confinement effect were obtained from sodium sulfide and lead nitrate by the reverse micelle method. Chemical parameters such as the water/surfactant and the [Pb²⁺]/[S²⁻] ratios play a very important role in the PbS particle size and in their absorption threshold. The PbS nanoparticles were dispersed in a hydrolyzed solution of TEOS and converted to homogeneous gels after heating. The absorption threshold of PbS doped-gel is blue shifted compared to the one of the as-prepared PbS particles. The non-linear optical properties of the PbS nanoparticle solution were measured by degenerate four-wave mixing and theX ⁽³⁾ value was estimated to be 1.95 10⁻¹¹ esu.     

Intensity and composition-dependent sign reversal of non-linearity in TiO2/CeO2 nanocomposites

CeO2/TiO2 composite nanoparticles with different Ce/Ti molar ratios have been successfully synthesized via sol-gel method. It was found that the band gap of the nanocomposite is tunable by varying Ce/Ti content. The nonlinear response of the sample was studied by using the nanosecond laser pulses from a Q switched Nd：Yag laser employing the Z-scan method. Open aperture Z-scan experiment revealed that with the increase in the CeO2 amount in the nanocomposite, the non-linearity of the composite increases, and it was assumed that this could be due to the modification of TiO2 dipole symmetry by the addition of CeO2. Closed aperture Z-scan experiment showed that when the CeO2 amount increases, positive nonlinear refraction decreases, and this could be attributed to the increase in the two photon absorption which subsequently suppresses the nonlinear refraction.     

A competition between Fujita and Strauss type exponents for blow-up of semi-linear wave equations with scale-invariant damping and mass

We obtain a blow-up result for solutions to a semi-linear wave equation with scale-invariant dissipation and mass and power non-linearity, in the case in which the model has a “wave like” behavior. We perform a change of variables that transforms our starting equation in a strictly hyperbolic semi-linear wave equation with time-dependent speed of propagation. Applying Kato's lemma we prove a blow-up result for solutions to the transformed equation under some assumptions on the initial data. The limit case, that is, when the exponent p is exactly equal to the upper bound of the range of admissible values of p yielding blow-up needs special considerations. In this critical case an explicit integral representation formula for solutions of the corresponding linear Cauchy problem in 1d is derived. Finally, carrying out the inverse change of variables we get a non-existence result for global (in time) solutions to the original model.     

Non-linear response of laminated composite plates under thermomechanical loading

The non-linear response of laminated composite plates under thermomechanical loading is studied using the third-order shear deformation theory (TSDT) that includes classical and first-order shear deformation theories (CLPT and FSDT) as special cases. Geometric non-linearity in the von Kármán sense is considered. The temperature field is assumed to be uniform in the plate. Layers of magnetostrictive material, Terfenol-D, are used to actively control the center deflection. The negative velocity feedback control is used with the constant gain value. The effects of lamination scheme, magnitude of loading, layer material properties, and boundary conditions are studied under thermomechanical loading.     

Large deflections of cantilever beams of non-linear elastic material under a combined loading

Large deflection of cantilever beams made of Ludwick type material subjected to a combined loading consisting of a uniformly distributed load and one vertical concentrated load at the free end was investigated. Governing equation was derived by using the shearing force formulation instead of the bending moment formulation because in the case of large deflected member, the shearing force formulation possesses some computational advantages over the bending moment formulation. Since the problem involves both geometrical and material non-linearities, the governing equation is complicated non-linear differential equation, which would in general require numerical solutions to determine the large deflection for a given loading. Numerical solution was obtained by using Butcher's fifth order Runge-Kutta method and are presented in a tabulated form.     

Non-linear propagation of laser beam and focusing due to self-action in optical fiber: Non-paraxial approach

A somewhat more general analysis for solving spatial propagation characteristics of intense Gaussian beam is presented and applied to the laser beam propagation in step-index profile as well as parabolic profile dielectric fibers with Kerr non-linearity. Considering self-action due to saturating and non-saturating non-linearity in the refractive index, a general theory has been developed without any kind of power series expansion for the dielectric constant as is usually done in other theories that make use of paraxial approximation. Result of the steady state self-focusing analysis indicates that the Kerr non-linearity acts as a perturbation on the radial inhomogeneity due to fiber geometry. Analysis indicates that the paraxial rays and peripheral rays focus at different points, indicating aberration effect. Calculated critical power matches with the experimentally reported result.     

Application of the Krylov–Bogoliubov–Mitropolsky method to weakly damped strongly non-linear planar Hamiltonian systems

In this paper, an analytical approximation of damped oscillations of some strongly non-linear, planar Hamiltonian systems is considered. To apply the Krylov–Bogoliubov–Mitropolsky method in this strongly non-linear case, we mainly provide the formal and exact solutions of the homogeneous part of the variational equations with periodic coefficients resulting from the Hamiltonian systems. It is shown that these are simply expressed in terms of the partial derivatives of the solutions, written in action-angle variables, of the Hamiltonian systems. Two examples, including a non-linear harmonic oscillator and the Morse oscillator, are presented to illustrate this extension of the method. The approximate first order solution obtained in each case is observed to be quite satisfactory.     

几何非线性分析的高效高阶无网格法

准确高效地处理几何非线性对于材料破坏等大变形过程的数值分析至关重要。考虑到无网格法具有易于形成高阶近似函数等诸多优点,本文发展了几何非线性分析的高阶无网格法。采用上一载荷步收敛的构形作为计算的参考构形,位移本质边界条件由罚函数法施加。为提高计算效率,将针对线性问题发展的二阶一致三点积分格式QC3（Quadratically Consistent 3-point integration scheme）拓展到考虑构形变化的几何非线性分析,大幅度减少了所需的积分点数目。数值结果表明,本文发展的高阶无网格法能够准确有效地处理几何非线性问题,而且在计算效率、精度以及应力场光滑性等方面均表现出显著优势。