新型制冷机冷凝器壳侧的传热强化研究

针对现行制冷机冷凝器的不足 ,设计了适用于冷凝传热的新型折流杆冷凝器的壳程内部结构 ,并分析了其传热强化机理。在重力控制条件下 ,对不同内部支承结构与管束组合的冷凝器进行了传热实验研究 ,得到了水蒸汽在冷凝器壳侧的冷凝传热特性曲线。采用冷凝传热强化因子的概念 ,建立了预测该种折流杆冷凝器壳侧冷凝传热膜系数的计算公式 ,为折流杆冷疑器在制冷系统中的设计应用提供了理论依据。     

Fourier regularization for a backward heat equation

In this paper a simple and convenient new regularization method for solving backward heat equation—Fourier regularization method is given. Meanwhile, some quite sharp error estimates between the approximate solution and exact solution are provided. A numerical example also shows that the method works effectively.     

Chip-calorimeter for small samples

A method for measuring heat capacities of small samples using a chip-calorimeter and a heat pulse technique is described. The theoretical background to calculate the heat transport properties and the heat capacity of the sample from the pulse response function is given. Problems and potentials of the method are discussed. An example is given.     

Specific heat and related thermophysical properties of liquid Fe-Cu-Mo alloy

The specific heat and related thermophysical properties of liquid Fe77.5Cu13Mo9.5 monotectic alloy were investigated by an electromagnetic levitation drop calorimeter over a wide temperature range from 1482 to 1818 K. A maximum undercooling of 221 K (0.13 Tm) was achieved and the specific heat was determined as 44.71 J·mol-1·K-1. The excess specific heat, enthalpy change, entropy change and Gibbs free energy difference of this alloy were calculated on the basis of experimental results. It was found that the calculated results by traditional estimating methods can only describe the solidification process under low undercooling conditions. Only the experimental results can reflect the reality under high undercooling conditions. Meanwhile, the thermal diffusivity, thermal conductivity, and sound speed were derived from the present experimental results. Furthermore, the solidified microstructural morphology was examined, which consists of (Fe) and (Cu) phases. The calculated interface energy was applied to exploring the correlation between competitive nucleation and solidification microstructure within monotectic alloy.     

对激光等离子体中X射线的产生与辐射加热研究

利用一维辐射流体力学程序MULTI数值模拟研究了功率为1014Wcm2、脉冲宽度为300ps、波长为0.44μm的强激光辐照平面Au靶时产生X射线的过程,给出了X射线转换效率和能谱分布.通过将靶物质划分为对所产生的X射线光学薄的转化区和光学厚的再发射区,得到了作为黑体辐射热源的最佳靶厚度,并给出了辐射加热靶所产生的等离子体的密度和温度的空间分布. 关键词： 辐射流体力学 激光等离子体 X射线转换 辐射热波     

关于半线性热方程整体解的注记

利用Besov空间的热核刻画及压缩映射原理,研究半线性热方程ut-△u＝u|u|a的初值问题,得到了当初值u0∈Lp0(Rn)且||u0||(B·)p-n (1/p0-1/p),∞(Rn)(p0＝na/2,p＞p0)充分小时,整体解的存在性及在一定条件下解的惟一性.     

不同温度均匀二半空间接触后产生的辐射场

 应用电磁线路中涨落耗散理论，推导了不同温度均匀二半空间接触后产生辐射场密度的公式。将此公式近似展开后，即得Grover和Urtiew所获得的表示式，不过多了一松弛项，该项如用非富里叶热传导理论推导，也是存在的。该结果和实验结果一致，不过这里的松驰时间可以应用介质性质进行计算。     

HL—1装置中心热区电子热传导初步分析

在电流及温度分布满足“不变性”原理的基础上,本文分析了等离子体中心热区的能量平衡,求出了电子热传导系数,根据实验数据拟合出HL-1装置电子热传导系数的定标关系为X_e=6.8(n_(eq1))~(-1.2)。此关系与其他托卡马克装置的结果类似。     

Heat transfer in lattice BGK modeled fluid

The thermal lattice BGK model is a recently suggested numerical tool aiming at solving problems of thermohydrodynamics. The quality of the lattice BGK simulation is checked in this paper by calculating temperature profiles in the Couette flow under different Eckert and Mach numbers. A revised lower order model is proposed to improve the accuracy and the higher order model is proved to be advantageous in this respect, especially in the flow regime with a higher Mach number.     

小长径比垂直管气液两相流动特性分析

实验观察了小长径比垂直上流管内流型及特点,并对管入口处的压力波动特性和系统的压差波动特性进行了试验研究.结果表明:小长径比(L/D)垂直管内流型表现为泡状流、塞状流、乳沫状流、环状流和液束环状流;分别增加管线中的气量、液量,或者同时增加气液流量,均会造成垂直管入口处压力波动的均值和最大压力的增加;压力信号的概率密度(PDF)大部分呈双峰分布,也存在单峰和多峰分布;差压信号的概率密度符合正态分布,其功率谱密度同压力信号相比具有频率波动范围宽、幅值小的特点.