Highly sensitive catalytic determination of molybdenum

A novel, highly sensitive, selective, and simple kinetic method was developed for the determination of Mo(VI) based on its catalytic effect on the oxidation of 1-amino-2-naphthol-4-sulfonic acid (ANSA) with H₂O₂. The reaction was followed spectrophotometrically by tracing the oxidized product at 465 nm after 30 min of mixing the reagents. The optimum reaction conditions were: 10 mmol l⁻¹ ANSA, 50 mmol l⁻¹ H₂O₂, 100 mmol l⁻¹ acetate buffer of pH 5.0 ± 0.05 and at 40 °C. Addition of 200 μg ml⁻¹ diethylenetriaminepentaacetic acid (DTPA) conferred high selectivity for the proposed method. Following the recommended procedure, Mo(VI) could be determined with a linear calibration graph up to 2.5 ng ml⁻¹ and a detection limit, based on the 3S_b-criterion, of 0.027 ng ml⁻¹. The unique sensitivity and selectivity of the implemented method allowed its direct application to the determination of Mo(VI) in natural and industrial waste water. The method was validated by comparison with the standard ETAAS method. Moreover, published catalytic-spectrophotometric methods for the determination of molybdenum were reviewed.     

二硫化钼基复合材料的合成及光催化降解与产氢特性

随着环境污染和能源短缺的加剧,无污染环境修复技术及清洁能源替代工程已成为一项重要而紧迫的任务。作为层状结构的过渡金属硫化物,二硫化钼带隙较窄,边缘具有高的反应活性,容易与其他物质形成复合结构,是近年来光催化环境修复及清洁能源领域的研究热点。本文详细介绍了半导体二硫化钼及其复合物的合成方法和光催化降解与产氢行为,重点阐述了二硫化钼及其复合物的具体复合方式、光催化降解污染物活性、光催化产氢活性以及具体的降解与产氢机理等方面的内容,并举例说明。二硫化钼及其复合物在光催化降解污染物和光催化产氢方面具有绿色、廉价、高效等优点,在环境修复及清洁能源领域具有巨大的潜力和应用发展前景。     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. 58. Zur Kenntnis von 2-(Dimethylaminomethyl)ferrocenyl-Verbindungen des Vanadiums,Molybdäns,Wolframs, Thoriums und Urans

Contributions to the Chemistry of Transition Metal Alkyl Compounds. 58 On 2-(Dimethylaminomethyl)ferrocenyl Compounds of Vanadium, Molybdenum, Tungsten, Thorium, and Uranium Earlier results according to which dimethylaminomethylferrocenyl groups (FcN) are able to form stable organometallic chelate compounds were confirmed by synthesis of the heterobimetallic chelate compounds (FcN)₂VO · Li(acac) II , (FcN)MoO₂(acac) III , (FcN)WOCl₃ IV , (FcN)Th(acac)₃ V , and (FcN)UO₂(acac) VI from the corresponding metal acetylacetonates or oxidchlorides and (FcN)Li I . The new compounds were characterized by elemental analysis, the i.r., ¹H-n.m.r., and electron spectra and by their effective magnetic moments.     

Adsorptive stripping voltammetric determination of traces of molybdenum in natural water in the presence ofα-benzoinoxime

The electrochemical behavior of the molybdenum complex of -benzoinoxime was investigated using cyclic voltammetry and linear scan voltammetry, after adsorptive accumulation of the complex onto a hanging mercury drop electrode (HMDE). The signal corresponds to the reduction of molybdenum in the complex adsorbed at the HMDE surface. Under optimal conditions, the adsorptive stripping voltammetric procedure gave an extremely low detection limit of 0.1 nM (9.6ng/l) Mo(VI) following stirred accumulation for 5 min at 0.0 V (vs. Ag/AgCl). The reduction cur rent-[Mo(VI)] relationships were linear up to 25 and 100 nM. Repetitive determinations of 10 nM solutions gave relative standard deviations of 2.2 and 3.5%, for 1 and 5-min accumulation periods, respectively. Most of the ions investigated did not interfere with the determination of molybdenum, except for tungsten. Excellent selectivity against copper was observed. The proposed procedure was applied to the direct determination of molybdenum in natural water.     

Preparation, phase transformation and photocatalytic activities of cerium-doped mesoporous titania nanoparticles

Cerium-doped mesoporous TiO₂ nanoparticles with high surface area and thermal stable anatase wall were synthesized via hydrothermal process in a cetyltrimethylammonium bromide (CTAB)/Ti(SO₄)₂/Ce(NO₃)₄/H₂O system. The obtained materials were characterized by XRD, FESEM, HRTEM, FTIR spectroscopy, nitrogen adsorption and DRS spectra. Experimental results indicated that the doping of cerium not only increased the surface area of mesoporous TiO₂ nanoparticles, but also inhibited the mesopores collapse and the anatase-to-rutile phase transformation. Moreover, the undoped, doped anatase mesoporous nanoparticles exhibit higher photocatalytic activity than commercial photocatalyst (Degussa, P25), but the maximum photodegradation rate corresponds to the undoped mesoporous TiO₂ nanoparticles. The lower photocatalytic activities of cerium-doped samples compared with undoped one may be ascribed to that the doped cerium partially blocks titania's surface sites available for the photodegradation and absorption of Rhodamine B (RB).     

Isomerism of [FeMM′(μ3-Q)(CO)7CpCp′] heterometallic clusters (Q = Se, Te; M, M′ = Mo, W; Cp = η5-C5H5; Cp′ = Cp, η5-C5(CH3)5) in solids

The crystal structures of three cluster compounds: [(µ-H)Fe₂Mo(µ₃-Te)(CO)₈Cp*], [FeMo₂(µ₃-Te)(CO)_7x Cp*₂], and [FeMoW(µ₃-Te)(CO)₇CpCp*], where Cp = ⁵-C₅H₅, Cp* = ⁵-C₅ (CH₃)₅, have been investigated. In the cluster with a tetrahedral {FeMo₂Te} core, one can observe positional isomerism of the carbonyl and cyclopentadienyl ligands with respect to the plane through the Fe and Te atoms and the center of the Mo₂bond, resulting in two mirror isomers in the racemic crystal. In the cluster with the {FeMoWTe} core, additional chirality causes the formation of four diastereoisomers. Earlier, the structure of the [FeMoW(µ₃-Se)(CO)₇Cp] cluster with Mo and W atoms coordinated to identical Cp-ligands has been structurally defined. In this crystal, statistical disordering of Mo and W over the metal positions is observed. In the [FeMo(Cp*)W(Cp)(µ₃-Te)(CO)₇] cluster studied here, the Mo and W atoms are coordinated to different cyclopentadienyl ligands. Due to this, two of four diastereoisomers were isolated as ordered racemic crystals; the other two are nonexistent for steric reasons.Original Russian Text Copyright © 2004 by A. V. Virovets, S. N. Konchenko, P. S. Yuferov, and D. FenskeTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 522–527, May–June 2004.     

掺铁纳米TiO_2的制备及其光催化性能

以TiC l4为原料,采用微波加热与常规加热2步合成法制备掺铁纳米TiO2。用X射线粉末衍射(XRD)、透射电镜(TEM)、紫外可见吸收光谱(UV-V is)、光电子能谱(XPS)等测试技术对其进行了表征。结果表明,所制得的掺铁纳米TiO2是以锐钛矿为主相的混晶,平均粒径约为10 nm,适量Fe3+的掺杂能促进金红石相变,抑制锐钛矿晶粒的生长,使Ti2p电子结合能升高0.3 eV,并使TiO2吸光能力增强,带边吸收向可见光区移动。在UVA段(320~400 nm)光照下,通过对维生素VB12的光催化降解,发现掺入摩尔分数为0.5%的Fe3+的纳米TiO2能明显提高其光催化活性,使维生素B12的降解速率提高2.3倍。     

Nitrogen fixation under mild ambient conditions: part I--the initial dissociation/association step at molybdenum triamidoamine complexes

In several recent studies Schrock and collaborators demonstrated for the first time how molecular dinitrogen can be catalytically transformed under mild and ambient conditions to ammonia by a molybdenum triamidoamine complex. In this work, we investigate the geometrical and electronic structures involved in this process of dinitrogen activation with quantum chemical methods. Density functional theory (DFT) has been employed to calculate the coordination energies of ammonia and dinitrogen relevant for the dissociation/association step in which ammonia is substituted by dinitrogen. In the DFT calculations the triamidoamine chelate ligand has been modeled by a systematic hierarchy of increasingly complex substituents at the amide nitrogen atoms. The most complex ligand considered is an experimentally known ligand with an HMT = 3,5-(2,4,6-Me3C6H2)2C6H3 substituent. Several assumptions by Schrock and collaborators on key reaction steps are confirmed by our calculations. Additional information is provided on many species not yet observed experimentally. Particular attention is paid to the role of the charge of the complexes. The investigation demonstrates that dinitrogen coordination is enhanced for the negatively charged metal fragment, that is, coordination is more favorable for the anionic metal fragment than for the neutral species. Coordination of N2 is least favorable for the cationic metal fragment. Furthermore, ammonia abstraction from the cationic complex is energetically unfavorable, while NH3 abstraction is less difficult from the neutral and easily feasible from the anionic low-spin complex.     

Selective Detection of Dopamine and Its Metabolite,DOPAC, in the Presence of Ascorbic Acid Using Diamond Electrode Modified by the Polymer Film

The surface of boron‐doped diamond (BDD) electrode is modified by the polymer film for the first time. The cationic polymer film of N,N‐dimethylaniline (DMA) is electrochemically deposited on BDD electrode surface. This polymer (PDMA) film‐coated BDD electrode is used as a sensor which selectively detect dopamine (DA) in the presence of ascorbic acid (AA). This electrode also can detect both DA and its metabolite, 3,4‐dihydroxy phenyl acetic acid (DOPAC) in the presence of AA in the range of the physiological concentrations of these species. Favorable ionic interaction (i.e., electrostatic attraction) between the PDMA film and AA or DOPAC lowers their oxidation potentials and enhances the current response for AA and DOPAC compared to that at the bare electrode. The PDMA film also shows a hydrophobic interaction with DA and DOPAC. In cyclic voltammetric measurements, the PDMA film‐coated electrode can successfully separate the oxidation potentials for AA and DA coexisting in the same solution and the separation is about 200 mV. AA oxidizes at more negative potential than DA. In square‐wave voltammetry, the sensitivity of the PDMA film‐coated BDD electrode for DA in the presence of higher concentration of AA is higher than that of the PDMA film‐coated glassy carbon electrode. The hydrodynamic amperometric experiments confirm that the oxidation of AA is not affected by the oxidized product of DA and vice versa. So, unlike the bare electrode the catalytic oxidation of AA by the oxidized DA is eliminated at the PDMA film‐coated BDD electrode. The sensitivities of the modified electrode for AA, DA and DOPAC, which are present in the same solution with their physiological concentration ratios, are calculated to be 0.070, 0.363 and 0.084 μA μM^?1, respectively. The modified electrode exhibits a stable and sensitive response to DA.     

Synthesis and Crystal Structure of cis-Bis(3-hydroxy2-ethyl-4-pyranonato)dioxomolybdenum(Ⅵ)

1 INTRODUCTION 3-Hydroxy-2-methyl-4-pyranone (maltol) and 3-hydroxy-2-ethyl-4-pyranone (ethylmaltol) are nontoxic compounds that have been applied to bio- inorganic chemistry over several decades[1, 2]. Their iron(III) complexes are relevant to the control of iron levels in the human body. Such complexes have been assessed for the amelioration of anaemia[3] and their respective ligands have been tested for the removal of excess burdens of iron in diseases such as siderosis, haemochroma…