Numerical Study of Mixed Convective Peristaltic Flow through Vertical Tube with Heat Generation for Moderate Reynolds and Wave Numbers

The current study focuses on the numerical investigation of the mixed convective peristaltic mechanism through a vertical tube for non-zero Reynolds and wave number. In the set of constitutional equations, energy equation contains the term representing heat generation parameter. The problem is formulated by dropping the assumption of lubrication theory that turns the model mathematically into a system of the nonlinear partial differential equations. The results of the long wavelength in a creeping flow are deduced from the present analysis. Thus, the current study explores the neglected features of peristaltic heat flow in the mixed convective model by considering moderate values of Reynolds and wave numbers. The finite element based on Galerkin's weighted residual scheme is applied to solve the governing equations. The computed solution is presented in the form of contours of streamlines and isothermal lines, velocity and temperature profiles for variation of different involved parameters. The investigation shows that the strength of circulation for stream function increases by increasing the wave number and Reynolds number. Symmetric isotherms are reported for small values of time-mean flow. Linear behavior of pressure is noticed by vanishing inertial forces while the increase in pressure is observed by amplifying the Reynolds number.     

玻璃-橡胶混合颗粒体系的弹性行为研究

废旧橡胶制品颗粒与砂土颗粒混合物作为建筑填充材料具有环保、轻质、减震效果好等特点.软硬组分的混合比例可以调制体系力学性能从而实现兼顾材料柔韧性与强度的需求,但细观层面上材料性能改变的原因尚不明确.本文主要研究玻璃-橡胶混合颗粒体系的弹性行为及其微观机制.利用飞行时间法测量混合材料等效动弹性模量,发现随着橡胶颗粒增加,体系逐渐从类玻璃刚性行为转变为类橡胶柔性行为.离散元模拟结果与实验结果类似.此外,模拟显示低橡胶颗粒占比样品内主要由玻璃颗粒构成主力链结构,而橡胶颗粒基本不参与强力链的构成.当橡胶颗粒占比较大时,玻璃颗粒和橡胶颗粒共同构成主力链网络结构,但颗粒间法向接触力分布相对更为均匀,可视为玻璃颗粒悬浮于橡胶颗粒中.基于上述结果,提出了改进的等效介质理论,用于描述混合颗粒体系的弹性行为.研究认为:橡胶颗粒占比较小时内部颗粒的变形相对均匀,材料近似满足等应变假设,视为并联弹簧模型;橡胶颗粒占比较大时混合材料近似满足等应力假设,视为串联弹簧模型.两种模型得到的结果与模拟结果一致.上述结果有利于从微观角度揭示混合颗粒材料弹性行为的变化机制.     

Optimization of core–valence states of molecules

ABSTRACT

Core–valence double-electron ionisation spectra of a few small molecules – carbon monoxide, ammonia, methyl fluoride and thiophene – are presented and analysed using the self-consistent field algorithm introduced by Hans Jørgen Jensen 30 years ago. It confirms the utility of this algorithm, frequently employed to obtain stable and sharp convergence of wave functions for the benefit of calculations of a great variety of molecular properties, thus also for optimisation of core–valence states and for the interpretation of the corresponding spectra.     

Correlation between electronic structure and energy band in Eu-doped CuInTe_2 semiconductor compound with chalcopyrite structure

The Eu-doped Cu(In, Eu)Te_2 semiconductors with chalcopyrite structures are promising materials for their applications in the absorption layer for thin-film solar cells due to their wider band-gaps and better optical properties than those of CuInTe_2. In this paper, the Eu-doped CuInTe_2(CuIn_(1-x)Eu_xTe_2, x = 0, 0.1, 0.2, 0.3) are studied systemically based on the empirical electron theory(EET). The studies cover crystal structures, bonding regularities, cohesive energies, energy levels,and valence electron structures. The theoretical values fit the experimental results very well. The physical mechanism of a broadened band-gap induced by Eu doping into CuInTe_2 is the transitions between different hybridization energy levels induced by electron hopping between s and d orbitals and the transformations from the lattice electrons to valence electrons for Cu and In ions. The research results reveal that the photovoltaic effect induces the increase of lattice electrons of In and causes the electric resistivity to decrease. The Eu doping into CuInTe_2 mainly influences the transition between different hybridization energy levels for Cu atoms, which shows that the 3d electron numbers of Cu atoms change before and after Eu doping. In single phase CuIn_(1-x)Eu_xTe_2, the number of valence electrons changes regularly with increasing Eu content,and the calculated band gap E_g also increases, which implies that the optical properties of Eu-doped CuIn_(1-x)Eu_xTe_2 are improved.     

装备电子设备边界扫描系列标准及测试性设计技术研究

随着新一代电子产品的复杂化和密集程度的不断提高,电路和系统的可测试性急剧下降,传统测试技术已经不能满足需要。针对我国军用电子设备的测试及诊断工作需求,通过对IEEE1149系列边界扫描测试标准进行了研究分析,分析各标准的特征范围、适用对象、各标准相互关系,可以分析梳理IEEE1149标准在我国军用电子设备测试性设计中的可行性和适用性,探索得到将边界扫描技术在测试性设计上的应用思路。将边界扫描技术应用于电子设备不同范围的测试设计,能有效地解决传统测试性设计的问题,能够提升诊断能力,缩减产品生产周期及研制费用。     

Ce3+/Ce4+电对在混酸(硫酸和甲磺酸)中的电化学行为

采用循环伏安、线性扫描、交流阻抗等技术研究了Ce³⁺/Ce⁴⁺电对在混酸(硫酸与甲磺酸)中的电化学行为,并对该体系在间接有机电合成中的应用进行了探索.结果表明：当硫酸和甲磺酸(MSA)浓度分别为0.8和1.0 mol·L^-1时,Ce³⁺/Ce⁴⁺电对具有最佳的电化学活性;在上述配比的混酸介质中,铈盐的溶解度得到了大幅提高,同时电解氧化铈(III)离子的电流效率较高（92.1%）,与纯硫酸体系中的电流效率接近（92.8%）,明显高于纯甲磺酸体系（78.5%）;该混酸介质中Ce⁴⁺在氧化茴香醚生成茴香醛这一过程中也表现出很好的氧化能力.     

缓冲层对量子阱二能级系统中电子子带间跃迁光吸收的影响

由于ZnO缓冲层对纤锌矿ZnO/Mg_xZn_(1-x)O有限深单量子阱结构左垒的限制作用,导致阱和右垒的尺寸、Mg组分值等因素将影响系统中形成二能级.本文考虑内建电场、导带弯曲及材料掺杂对实际异质结势的影响,利用有限差分法数值求解Schr?dinger方程,获得电子的本征能级和波函数,探讨ZnO缓冲层对此类量子阱形成二能级系统的尺寸效应及三元混晶效应的影响;利用费米黄金法则探讨缓冲层、左垒、阱及右垒宽度和三元混晶效应对此类量子阱电子子带间跃迁光吸收的影响.计算结果显示:对于加入ZnO缓冲层的ZnO/Mg_xZn_(1-x)O有限深单量子阱二能级系统,左垒宽度临界值会随着阱宽和Mg组分值的增大而逐渐减小,随着右垒宽度和缓冲层厚度的增大而逐渐增大;量子阱中电子子带间跃迁光吸收峰会随着左垒、右垒尺寸以及Mg组分的增大发生蓝移,随着阱宽增大而发生红移.本文所得结果可为改善异质结器件的光电性能提供理论指导.     

高效率的蓝色磷光有机电致发光器件

制备了基于双母体结构的高效率蓝色磷光有机电致发光器件。通过与采用单母体结构和双发光层结构的器件性能进行对比,发现双母体结构的应用对蓝光器件的性能起到了明显的提升作用。双母体蓝光器件的最大效率为14.9 cd/A(13.3 lm/W),最大亮度达到10 440 cd/m~2,其开启电压仅为2.7 V。蓝光器件同时展示出低的效率滚降特性,在100~5 000 cd/m~2范围内,器件的效率滚降仅为35.3%。在3~8 V的电压变化内,器件的色坐标一直位于蓝光区域。     

功率型白光LED的非线性混合调光方法

分析脉冲宽度调制(PWM)双通道输出白光LED的混合调光方法,建立PWM与混合光源输出的光通量和色温之间变化关系的非线性数学模型。基于Zig Bee无线通信模块CC2530作为双路PWM输出,控制以SN3350为核心的LED恒流驱动电源,完成占空比可调的暖白和冷白两路白光LED的色温和光通量混合调光控制系统设计,并通过高精度快速光谱辐射计HAAS-2000测试系统进行测试。实验结果表明,双路PWM能够较好地实现对LED色温和光通量的输出大小进行控制,混合光源相关色温在3 250~15 000 K范围内连续可调。理论计算与系统控制的光通量和色温存在的相对误差分别小于1.70%和8.50%。