An In Situ Copper Plated Boron‐Doped Diamond Microelectrode Array for the Sensitive Electrochemical Detection of Nitrate

The first example of using a copper microelectrode array for use in electroanalysis is explored and exemplified with the electroanalytical quantification of nitrate. The analytical approach is based upon the in situ deposition of copper at a boron‐doped diamond (BDD) microelectrode array. The immobilized copper layer is electrocatalytic for nitrate reduction and exhibits an analytically useful range from 1.2 to 124 μM with a marked selectivity for nitrate ion over nitrate, with a limit of detection of 0.76 μM. The analytical applicability was examined through standard addition determinations of nitrate in drinking and river water samples.     

Synthesis, crystal structure and properties of the Cu complex of a tetradentate imidazole-functionalized diazamesocyclic ligand, 1,4-bis(N-1-methylimidazol-2-yl-methyl)-1,4-diazacycloheptane

A new potential tetradentate ligand, 1,4-bis(N-1-methylimidazol-2-ylmethyl)-1,4-diazacycloheptane (l), together with its Cu^II complex [CulCl]ClO₄ (1), has been reported. The crystal structure of 1, determined by single-crystal X-ray analysis, shows that it is in chiral P2₁2₁2₁ space group. The Cu^II centre is penta-coordinated in square pyramidal geometry and the diazacycloheptane (DACH) ring adopts normal boat configuration. The most striking feature of this complex is the formation of a 3D network bridged through the C-H?Cl hydrogen bonds with the perchlorate anions in the cavities, and stabilized via π-π stacking interactions along the a-direction. The solution behaviour of 1 has been further investigated by UV/Vis and ESR techniques.     

Application of an integrated microchip system with capillary array electrophoresis to optimization of enzymatic reactions

In this work, a combination of complementary metal-oxide semiconductor (CMOS) microchip system with capillary array electrophoresis (CAE) is demonstrated as a system for optimizing conditions for enzymatic reaction. Dimethylacridinone (DDAO)-phosphate substrate and alkaline phosphatase conjugate were selected for the enzymatic reaction, which was applicable to the enzyme-linked immunosorbent assay (ELISA) technique. Laser-induced fluorometry with a miniature semiconductor laser was used to detect the enzymatic products. The speed of the enzymatic reaction between the DDAO-phosphate and the alkaline phosphatase conjugate was investigated as a function of reaction time. The microchip-CAE detection system could determine the pH condition and the concentration of enzyme that are suitable for rapid and low-cost analysis. This result shows the feasibility of using the microchip-CAE system for application to miniaturized screening systems.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

Novel Fabrication of Conductive Polymers Contained Micro‐Array Gas Sensitive Films Using A Micromanipulation Method

A novel method for fabricating a micro gas sensor film on an indium tin oxide (ITO) electrode patterned using micro‐machining technology was developed. A micromanipulation system equipped with a counter electrode (Au; Ø10 μm) and a microsyringe, which was connected to a microinjection system, was first constructed. With this system, micro gas sensor arrays could be successfully prepared on ITO electrodes. Two kinds of micro gas sensor films were prepared, based on polythiophene (PTh) and poly(3‐n‐dodecylthiophene) (PD). The response behavior of conventional PTh and micro‐PTh films against NH₃ at three different operating temperatures (25, 40 and 60 °C) was investigated by measuring the resistance of the film. With the micro‐PTh film, a reversible response was observed against NH₃ when measured at 40 and 60 °C. In addition, the responsive characteristics of the microsensor films against different testing gases were examined at the three operating temperatures. The resistance of the microsensor films of PTh and PD changed considerably, depending on the type of testing gas, allowing these sensor films to be used for the detection of various gases. Furthermore, the microsensor films had a high stability compared with conventional films prepared from the same polymer.     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.     

A statistical method to detect chromosomal regions with DNA copy number alterations using SNP-array-based CGH data

Single nucleotide polymorphism (SNP) arrays were used to detect chromosomal regions with DNA copy number alterations. Current statistical methods for microarray-based comparative genomic hybridization (array-CGH) analysis generally assume certain relationships among adjacent markers on the same chromosome, and these assumptions may be questionable. For an SNP-array-based CGH study, multiple normal reference SNP arrays were collected. In order to utilize these normal reference SNP arrays, we derived an empirical distribution of signal ratios for each SNP marker. With an assumed threshold value for the overall error rate control and the defined signal ratio ranges for chromosomal amplification and deletion, we proposed a procedure to identify chromosomal alteration regions based on several bootstrapped one-sample t-tests and the false discovery rate control. When we have multiple arrays for different individuals with the same disease, our method can also be used to detect SNP markers for chromosomal alteration regions that are common among these individuals. We applied our method to a published SNP array data set for breast carcinoma cell lines. For an individual with breast cancer, numerous chromosomal alteration regions were identified. Compared to results of previous studies, our method identified more chromosomal alteration regions, with some being implicated in the literature to harbor genes associated with breast cancer. For multiple cancer arrays, our results suggested the existence of common chromosomal alteration regions. However, a high proportion of false positives also indicated that genetic variations among different individuals with breast cancer can be present.     

Fe-Co-Ni合金纳米线有序阵列的模板合成与磁性

以二次阳极氧化的氧化铝膜为模板，用电化学沉积的方法成功地合成了Fe-Co-Ni三组份有序纳米线阵列.扫描电子显微镜（SEM）和透射电子显微镜(TEM)观察表明纳米线表面光滑、有序、高长径比；磁性测量表明,其矫顽力较同组份的膜材料有较大的提高.将样品在惰性气体氛围中不同温度下退火，随着退火温度增加，其纵向矫顽力有一个极值，而对应的横向矫顽力没有类似的变化，关于这一现象的机理,本文进行了初步的讨论. 图5参15