A two dimensional, experimental study on the evolution of the detachment and its time-behavior in filled rubber

Summary The detachment of a rubber matrix from a rigid inclusion under monotonic loading and at subsequent relaxation is investigated within two dimensional analysis. Examined are stress–strain experimental data acquired with the help of a test bed equipped with a digital image-acquisition device. The influence of the interfacial bonding strength and the particle size on the detachment process is analyzed. The influence of the interfacial bonding strength is visible in the stress–strain diagram of loading and in the recorded images. The relaxation test reveals no influence of the bonding strength on the stress-relaxation. However, the image analysis indicates a secondary transient creep of the contour of detachment, which depends on the interfacial bonding.     

Decoherence within a single atom

An “almost diagonal” reduced density matrix (in coordinate representation) is usually a result of environment induced decherence and is considered the sign of classical behavior. We show that the proton of a ground state hydrogen atom can indeed possess such a density matrix. This example demonstrates that the “almost diagonal” structure may be derived from an interaction with a low number of degrees of freedom which play the role of the environment. We also show that decoherence effects in our example can only be observed if the interaction with the measuring device is significantly faster than the interaction with the environment (the electron). In the opposite case, when the interaction with the environment is significant during the measurement process, coherence is maintained. Finally, we propose a neutron scattering experiment on cold He atoms to observe decoherence which shows up as an additional positive contribution to the differential scattering cross section. This contribution is inversely proportional to the bombarding energy.     

Integral Method o Reciprocity in the Spectroscopy of Laser Crystals with Impurity Centers

A new method of determining the stimulated emission cross-section spectra from the absorption cross-section spectra, which we call the integral method of reciprocity, is suggested it does not require knowledge of the structure of the impurity-center electron levels. Based on this method, formulas for calculating the radiation lifetime of impurity centers in crystals have been derived. The effectiveness of the integral method of reciprocity was demonstrated in determining the stimulated emission cross sections and radiation lifetime of an ytterbium ion in the laser crystals Yb³⁺:KYW and Yb³⁺:KGW.     

Angular response characteristic of pyramid shape fast neutron dosimeter using CR-39 films

CR-39 is a highly sensitive etched track detector for neutron monitoring and dosimetry applications but its dose equivalent response is strongly direction dependent with respect to the incident neutrons. This is considered to be a major drawback for their use. In the present study, an attempt has been made to develop a pyramid shaped dosimeter, which consists of polyethylene material of thickness 1 mm with the provision to hold three CR-39 films at an angle of 35° to each other. The response of CR-39 in this configuration under optimum electrochemical etching at elevated temperature have been found nearly angular independent and therefore the dosimeter can be used for neutron monitoring, i.e. personnel as well as area monitoring.     

Orientation and relaxation of polymer–clay solutions studied by rheology and small-angle neutron scattering

The influence of shear on viscoelastic solutions of poly(ethylene oxide) (PEO) and clay [montmorillonite, i.e., Cloisite NA+ (CNA)] was investigated with rheology and small-angle neutron scattering (SANS). The steady-state viscosity and SANS were used to measure the shear-induced orientation and relaxation of the polymer and clay platelets. Anisotropic scattering patterns developed at much lower shear rates than in pure clay solutions. The scattering anisotropy saturated at low shear rates, and the CNA clay platelets aligned with the flow, with the surface normal parallel to the gradient direction. The cessation of shear led to partial and slow randomization of the CNA platelets, whereas extremely fast relaxation was observed for laponite (LRD) platelets. These PEO–CNA networklike solutions were compared with previously reported PEO–LRD networks, and the differences and similarities, with respect to the shear orientation, relaxation, and polymer–clay interactions, were examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3102–3112, 2004     

BNCT蒙特卡洛剂量计算的混合网格算法研究

在硼中子俘获治疗(BNCT)的蒙特卡洛(MC)剂量计算中,通常使用单一的网格模式,如16mm,8mm,4mm.使用细网格计算资源太大,使用粗网格,计算精度不够,为此,根据粒子穿透深度和计数量的变化梯度,采用混合网格模拟计算,达到了细网格的精度,时间仅为细网格的37%.     

Role of IUC-DAEF in promoting neutron beam research in India

Inter University Consortium for Department of Atomic Energy Facilities (IUC-DAEF) is an autonomous institute of the University Grants Commission and provides an interface between the university fraternity and the institutions of Department of Atomic Energy. Mumbai Centre of IUC-DAEF promotes and supports the use of neutron facilities at Dhruva reactor by the university scientists. To augment the existing neutron scattering facilities, IUC-DAEF has developed a neutron beam line at Dhruva reactor. The present paper gives a brief survey of the activities and achievements of Mumbai Centre of IUC-DAEF.     

BNCT优化网格设计及相关算法研究

用MCNP蒙特卡罗程序模拟了硼中子俘获治疗(BNCT)3种国际基准网格模型, 并与 修正的Snyder椭球模型进行了比较. 在此基础上, 给出了一种保质量守恒、内存量少、易于产生输入文件的4种基本材料成分的BNCT网格模型. 计算结果表明, 在4mm网格下, 新模型可以达到基准模型的精度; 根据解析模型剂量随深度的变化规律, 研究构造了多网格组合模型, 在重要区域计算精度不损失的条件下, 计算时间大大缩短. 最后研究给出了一个既保证精度、又在可接受的时间内完成剂量计算的模型、样本数和相应的算法, 它基本上满足临床BNCT的要求.     

13.5—14.6MeV中子能区锗的同位素反应截面的测量

报道了在13.5—14.6MeV中子能区用活化法测得的⁷⁶Ge(n,2n)⁷⁵Ge, ⁷⁰Ge(n,2n)⁶⁹Ge, ⁷⁰Ge(n, p)⁷⁰Ga, ⁷²Ge(n,p)⁷²Ga, ⁷³Ge(n,p)⁷³Ga, ⁷²Ge(n,α)^69mZn和⁷⁴Ge(n, α)^71mZn的反应截面值. 中子注量用⁹³Nb(n,2n)^92mNb反应截面得到. 单能中子由T(d,n)⁴He反应获得. 同时还列举了已收集到的文献值以作比较.