利用计算机辅助装调检测矩形大口径离轴非球面的方法研究

通过非球面的零位补偿法,完成了对矩形大口径离轴非球面镜的检测。先用光学设计软件Zemax从理论上分析了在检测中会出现的现象,并结合计算机辅助装调技术,确定在检测过程中相对敏感的自由度,然后控制这些量,使补偿器和非球面的相对关系与理论设计相吻合,在Zygo相位干涉仪上测得最终结果。在λ=632.8nm时,中心圆口径与两个边缘圆口径面形误差RMS分别为0.022λ,0.037λ,0.032λ。检测结果,达到预期目的。     

陈化温度和Fe/Zr配比对SO42-/Fe2O3-ZrO2固体超强酸结构与性能的影响

用低温陈化法制备了SO42 -/Fe2 O3 ZrO2 (简称SFZ)固体超强酸催化剂 ,用红外光谱 (IR)和X光衍射(XRD)对其结构进行了表征 ,并考察了它对合成癸二酸二正丁酯的催化性能 .IR谱显示 ,低温陈化的SFZ样品在10 70cm-1处吸收峰远强于常温陈化样品 .XRD分析则显示 ,在焙烧温度为 6 5 0℃、Fe/Zr为 2∶1时 ,低温陈化的样品出现了亚稳态的ZrO2 四方晶相 .该样品在催化酯化反应中使产率达 90 %以上 ,高于常温陈化样品的 30 % .研究结果表明 :在其他条件不变时 ,低温陈化所出现的亚稳态的ZrO2 四方晶相是表面酸性和催化活性增加的微观原因     

Electrical characterization of low temperature deposited TiO2 films on strained-SiGe layers

Thin films of titanium dioxide have been deposited on strained Si_0.82Ge_0.18 epitaxial layers using titanium tetrakis-isopropoxide [TTIP, Ti(O-i-C₃H₇)₄] and oxygen by microwave plasma enhanced chemical vapor deposition (PECVD). The films have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Dielectric constant, equivalent oxide thickness (EOT), interface state density (D_it), fixed oxide charge density (Q_f/q) and flat-band voltage (V_FB) of as-deposited films were found to be 13.2, 40.6 Å, 6×10¹¹ eV⁻¹ cm⁻², 3.1×10¹¹ cm⁻² and −1.4 V, respectively. The capacitance–voltage (C–V), current–voltage (I–V) characteristics and charge trapping behavior of the films under constant current stressing exhibit an excellent interface quality and high dielectric reliability making the films suitable for microelectronic applications.     

Temperature factor effect on the structure of the separated flow within a supersonic gas stream

The effect of the temperature factor, that is, the ratio of the body temperature to the freestream stagnation temperature, on the structure of the separated flow formed in the presence of a concave corner in a supersonic stream is studied. The strong influence of the temperature factor on the separation zone length and the flow-generated aerodynamic characteristics is established. It is shown that for fairly large deflection angles this flow cannot be described by free interaction, or triple deck, theory.     

Rheological properties of polyacrylates used as synthetic road binders

Most adhesives and binders, including bitumen for asphalt mixture production, are presently produced from petrochemicals after the refining of crude oil. The fact that crude oil reserves are a finite resource means that in the future, it may become necessary to produce these materials from alternative and probably renewable sources. Suitable resources of this kind may include polysaccharides, plant oils and proteins. This paper deals with the synthesis of polymer binders from monomers that could, in future, be derived from renewable resources. These binders consist of polyethyl acrylate (PEA) of different molecular weight, polymethyl acrylate (PMA) and polybutyl acrylate (PBA), which were synthesised from ethyl acrylate, methyl acrylate and butyl acrylate, respectively, by atom transfer radical polymerisation. The rheological properties of these binders were determined by means of oscillatory testing using a dynamic shear rheometer and combinations of stress/strain, temperature and frequency sweeps. The results indicate that PEA can be produced to have rheological properties similar to that of ‘soft’ 100/150 penetration grade bitumen, PMA with similar rheological properties to that of ‘hard’ 10/20 penetration grade bitumen, while PBA, due to its highly viscous nature and low dynamic moduli, cannot be used on its own as a binder. The synthetic polymers were found to be thermo-rheologically simple, and the shift factors, used to produce the dynamic moduli master curves, were found to fit an Arrhenius function.     

后退火温度对溅射沉积Pb(Zr0.52Ti0.48)O3铁电薄膜结构和性能的影响

在具有Ti缓冲层的Pt(111)底电极上,用射频溅射工艺在较低的衬底温度(370℃)和纯Ar气氛中沉积Pb(Zr0.52Ti0.48)O3(PZT)薄膜,沉积过程中基片架作15°摇摆以提高膜厚的均匀性。然后将样品在大气中进行5min快速热退火处理,退火温度550-680℃。用XRD、SEM分析薄膜的微结构,RT66A标准铁电测试系统测量样品的铁电和介电性能。结果表明,所沉积的Pt为(111)取向,仅当后退火温度高于580℃,沉积在Pt(111)上的PZT薄膜才能形成钙钛矿结构的铁电相,退火温度在580-600℃时结晶为(110)择优取向,退火温度高于600℃时结晶为(111)择优取向。PZT薄膜的极化强度随退火温度的升高而增加,但退火温度超过650℃时漏电流急剧上升,因此退火处理的温度对PZT薄膜的结构和性能有决定性的影响。     

氘代聚合物膜靶制备技术与性能研究

 氘代聚合物膜是快点火基础物理实验的一种重要靶型。通过氘代苯乙烯单体的本体自由基聚合反应制备氘代聚苯乙烯，并利用流延法和浇铸法制备出厚度从几十nm到数百μm的膜靶。溶剂挥发过程中的随机扰动对膜厚均匀性造成影响，采用清洁的基片和在涂沫基片或模具外加防护罩可以降低这种影响。采用PVA作脱膜剂有利于获得较薄的聚合物薄膜。DSC分析表明薄膜的玻璃化转变温度与热处理过程有关，缓慢退火有利于提高Ｔ-g和储能模量。     

提高YBCO块材在外磁场中悬浮力

本给出了三种提高YBCO块材在外磁场中悬浮力的方法．第一种方法是增强外磁场，对于此方法，本研究了一块直径为30mm的圆柱状YBCO块材分别在圆柱状NdFeB永磁体和NdFeB永磁导轨上的悬浮力．测量结果表明在77K温度下YBCO块在圆柱状NdFeB永磁体上的最大悬浮力为50N，在NdFeB永磁导轨上的最大悬浮力为103．ON．第二种方法是提高YBCO块材自身的性能，包括临界电流密度、俘获磁通和块材尺寸，对于此方法，本仅研究了块材尺寸对悬浮力的影响．三块直径分别为30mm、35mm、40mm的圆柱状YBC0块材在NdFeB永磁导轨上的悬浮力被测量，77K温度下5mm悬浮间距时的悬浮力分别为103．ON、134．5N、175．ON．第三方法是将YBCO块材变成准永久磁体，此种情况下，直径为40mm的圆柱状YBCO块材在77K温度下5mm悬浮间距时的悬浮力高达218．3N．     

小阶跃反应性输入时点堆中子动力学方程的解析解

对小阶跃反应性输入（0<ρ,０<β）且有温度反馈时点堆中子动力学方程进行了研究. 导出任意初始功率条件下核反应堆功率、反应性与时间的解析表达式. 分析和讨论了初始功率与输入小阶跃反应性的大小对功率、反应性变化规律的影响，得到了一些新的结果. 关键词： 中子动力学 反应性 点堆 温度反馈     

非本征型法布里-珀罗干涉仪光纤布拉格光栅应变温度传感器及其应用

介绍了光纤布拉格光栅非本征型法布里珀罗干涉仪集成复用传感器的结构、应变和温度同时监测的原理 ;观察到光纤布拉格光栅反射谱和非本征型法布里珀罗干涉仪干涉谱间的串扰 ,用 3dB带宽平均波长法减小了该串扰 ,提高了测量精度 ;将该传感器应用于三维编织复合材料的应变及温度同时监测。实验结果表明温度精度为± 1℃ ,应变精度为± 2 0 μ ,可满足实际应用的要求