Two-spin-majority cellular automaton as a model of 2D cluster and interface growth

A new probabilistic cellular automaton model is introduced to simulate cluster and interface growth in two dimensions. The dynamics of this model is an extension to higher dimensions of the compact directed percolation studied by Essam. Numerical results indicate that the two-dimensional cluster coarsening and growth can be described only approximately by the conventional cluster size scaling due to a crossover in the growth mode. The spreading of the initially flat interface follows a purely diffusional,t ^1/2, law.     

Spectral Representation Theory for Dielectric Behavior of Nonspherical Cell Suspensions

Recent experiments revealed that the dielectric dispersion spectrum of fission yeast cells in a suspension was mainly composed of two sub-dispersions. The low-frequency sub-dispersion depended on the cell length, while the high-frequency one was independent of it. The cell shape effect was simulated by an ellipsoidal cell model but the comparison between theory and experiment was far from being satisfactory. Prompted by the discrepancy, we proposed the use of spectral representation to analyze more realistic cell models. We adopted a shell-spheroidal model to analyze the effects of the cell membrane. It is found that the dielectric property of the cell membrane has only a minor effect on the dispersion magnitude ratio and the characteristic frequency ratio. We further included the effect of rotation of dipole induced by an external electric field, and solved the dipole-rotation spheroidal model in the spectral representation.Good agreement between theory and experiment has been obtained.     

寡聚乳酸改性葡聚糖的合成及表征

设计了两种基于寡聚L-乳酸(OLL)改性葡聚糖的工艺路线:路线Ⅰ为OLL末端羟基活化后接枝葡聚糖;路线Ⅱ为在亲核试剂及偶合剂的存在下,OLL末端羧基接枝葡聚糖.研究表明,固定OLL与葡聚糖摩尔比,延长反应时间有利于提高路线Ⅰ的产品得率,而对路线Ⅱ中的产品得率几乎没有影响.1HNMR,IR,UV表征改性后产物显示OLL在葡聚糖上的接枝率(葡聚塘的100个葡萄糖单元上OLL的数目)可以通过调节反应物摩尔比得到有效的控制.     

UV curing of a novel resin derived from poly(ethylene terephthalate)

The synthesis and characterization of photopolymerizable unsaturated polyester resins based on PET waste are described. The resins came from a depolymerization process based on the glycolysis of PET by diethylene glycol (DEG). Different molecular weights of glycolysates were synthesized. Then, the latter was functionalized by a methyl hemiester of maleic acid to obtain unsatured α,ω‐bismaleate PET oligomers. In the presence of an electron donor monomer, such as triethylene glycol divinyl ether, these electron acceptor oligomers were copolymerized by way of charge‐transfer complexes under UV irradiation. The reaction was monitored in situ by real‐time IR spectroscopy to study the kinetics of photopolymerization. This one was studied in relation with the physical and chemical characteristics of oligoesters and the composition of mixtures containing divinyl ethers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1324–1335, 2007     

Averaged topological equations for dispersed two-phase flows

A general relationship between the volume fraction and the specific interfacial area for averaged dispersed two-phase flows is proposed. This relationship, expressed as a basic set of two scalar evolution equations and two vectorial non-uniformity state equations, is an analytical result obtained by a systematic approach using the derivatives of some generalized functions and a local volume-averaging technique. The proposed set of equations was expressed for measurable macroscopic parameters of the system and has the same generality as the averaged transport equations of two-phase flows. By combination of the basic set of equations, called the averaged topological equations (ATEs), second-order ATEs for the volume fraction were found. The second-order ATEs were expressed both by a Lagrangian formulation and by a Eulerian formulation. The importance and physical meaning of the ATEs developed in this study were clarified within the framework of the theory of kinematic waves.     

SHI induced modification in CR-39 polycarbonate by positron annihilation lifetime studies

CR-39 is a polycarbonate widely used as SSNTD for recording nuclear charged particles and in other applications. Latent ion tracks produced in the polymers due to the damage produced by the passage of Swift Heavy Ions contain amorphous material with highest degree of disorder, changing the free volume properties which have strong correlation with the macroscopic properties of the material. Positron annihilation lifetime spectroscopy (PALS) provides direct information about the dimension, content and hole size distribution of free volume in polymers. The effect of irradiation of ⁴⁰Ar (14.9 MeV/n) ions on CR-39 polycarbonate by Positron Annihilation Lifetime Spectroscopy (PALS) is reported here. PALS provides a non-destructive and non-interfering probe, having high detection efficiency for free volume hole properties. From o-Ps lifetime mean free volume hole radius and average free volume of the micro-voids have been calculated. PAL measurement shows an increase in free volume on irradiation.     

Local chain‐configuration dependence of the mechanisms of the chemical reaction of poly(vinyl chloride). IX. Novel results on stereoselectivity of chlorination reaction

A poly(vinyl chloride) (PVC) sample was chlorinated in solution in the presence of 2,2′‐azobisisobutyronitrile and by the fluid‐bed method. The aim was to evaluate the scope of the stereoselectivity of the chlorination reaction. The quantitative microstructural analysis of the residual PVC with a degree of chlorination was followed by ¹³C NMR spectroscopy. From the evolution of the content of isotactic (mm), heterotactic (mr), and syndiotactic (rr) triads and of mmmm, mmmr, and rmmr isotactic pentads in the unchlorinated parts of the polymer, it was unambiguously inferred that the chlorination reaction proceeds by a stereoselective mechanism in that the mr heterotactic triads are the most reactive structures followed by the isotactic triad at mmmr and rmmr pentads. This conclusion was confirmed on the basis of the Fourier transform infrared results. The results provide valuable information regarding the effect of tacticity and related local conformations in the chemical reactions of PVC. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 508–519, 2003     

Novel route to synthesis of allyl starch and biodegradable hydrogel by copolymerizing allyl‐modified starch with methacrylic acid and acrylamide

Maize starch was modified by allyl chloride adopting an interfacial reaction technique with cetyltrimethyl ammonium bromide as a phase‐transfer catalyst and pyridine as an acid acceptor. The degree of substitution was determined from an increasing carbon content of the modified starch. The percentage of carbon and hydrogen of the allyl‐modified starch was estimated by elemental analysis (C, H, and N), and the product characterization was done through ¹H NMR and ¹³C NMR analyses. The allyl‐modified starch was then copolymerized with methacrylic acid and a combination of methacrylic acid and acrylamide at 50 and 70 °C with potassium persulfate as an initiator. The copolymer thus formed swelled in distilled water after neutralization with sodium carbonate. The percentage of absorption capacity of the hydrogels was determined with distilled water and 0.9% NaCl solution. The highest percentage of absorption, 6500%, was achieved for the developed hydrogel containing allyl starch and acrylic monomer in a 1.7:1 w/w ratio and acrylic monomer, namely, methacrylic acid and acrylamide in a 3.2:1 w/w ratio. The study on biodegradability of the developed hydrogel showed that the hydrogel is degradable in the presence of diastase (amylase). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1650–1658, 2003     

Synthesis of new thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing epoxide pendant groups

A new class of thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing pendant epoxide groups were synthesized and characterized. These new epoxy polymers were prepared through the bromination of poly(2,6‐dimethyl‐1,4‐phenylene oxide) in halogenated aromatic hydrocarbons followed by a Wittig reaction to yield vinyl‐substituted polymer derivatives. The treatment of the vinyl‐substituted polymers with m‐chloroperbenzoic acid led to the formation of epoxidized poly(2,6‐dimethyl‐1,4‐phenylene oxide) with variable pendant ratios, and the structures and properties were studied with nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography. The ratios of pendant functional groups were tailored for the polymer properties, and the results showed that the glass‐transition temperatures increased as the benzylic protons were replaced by bromo‐, vinyl‐, or epoxide‐functional groups, whereas the thermal stability decreased in comparison with the original polymer. Within a molar fraction of 20–50%, the degree of functionalization had little effect on the glass‐transition temperature; however, it correlated inversely with the thermal stability of each functionalized polymer. The thermal curing behavior of the epoxide‐functionalized polymer was enhanced by the increment of the pendant functionality, which resulted in a significant increase in the glass‐transition temperature as well as the thermal stability after the curing reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5875–5886, 2006