Surface structure monitoring with plastic optical fiber

A sensor was designed using a plastic optical fiber to study the potential of detecting structural deformities and corrosion of metallic surfaces, in particular for applications in constricted areas such as pipes. The principle of the sensor is based on the collection of scattered light reflected by the surface imperfections. Several types of metallic materials in various surface profiles and stages of corrosion have been studied. The sensor was able to determine the position of ridges on the surface and corroded regions in all cases evaluated in the study. A sensitivity of 100 mV/mm was detectable for proximity and a vertical resolution of 1 mm has been measured.     

X-Y振镜扫描式舌诊高光谱采集系统

针对目前舌诊研究中在舌体信息全面获取方面存在严重不足,将高光谱技术用到舌诊的研究中来,提出了一种基于X-Y振镜扫描式舌诊高光谱采集系统.通过模拟实验,采集与舌体大小相似图片的高光谱信息,验证了该系统可以用于舌体高光谱信息采集,实验结果表明,与现有舌诊客观化研究相比,该系统可以获得更多的舌体信息,为舌诊客观化研究提供了一...     

两种不同系统因素影响下完全检验的最优设计

本文研究了两种不同系统因素影响下完全检验的质量最优问题 ,采用有两种不同控制界限的控制图来控制生产过程 ,并根据完全检验的特点 ,提出了一种新的最优模型。 Hui(1 991 )提出的最优模型是本文的最优模型的特殊情况 ,并且本文建立的最优模型还可推广到两种以上不同的系统因素下影响的情况     

Mural inspection by vibration measurements with TV-holography

A commonly encountered problem in the conservation of historical murals is the identification of sections in the plaster that have detached from the wall and thus threaten to fall off. Commonly, walls are inspected by the acoustic response to a gentle finger-tapping (percussion method). Since this is a costly and cumbersome technique, means for a more automatic inspection are searched for. A TV-holography system of increased sensitivity in combination with acoustic excitation of the object is shown to be a new and powerful tool for monitoring of loose areas. It has the advantage of non-contact and remote operation which, for example, is extremely useful in large buildings. Principles of the method, experimental results obtained at an artificial wall in the laboratory, and a thorough comparison of results from historical sites gained by the traditional percussion method and the new technique are presented. The latter shows very good agreement in the assessment of wall quality and thus is evidence of the suitability of the optical equipment for tasks in conservation.     

Optimal Sequencing of Inspection of Dependent Characteristics

We address the problem of sequentially inspecting the dependent characteristics of a product, where the dependency is expressed in terms of the joint probabilities of the fitness of the characteristics. We show that, even when the inspection has classification errors, the joint probability mass function of the observed fitness of the characteristics is independent of the sequence of inspection. Using this result, a dynamic programming approach is presented for finding the optimal sequence that minimizes the expected total cost of inspection. Previously reported policies for independent characteristics are shown to be special cases of the results presented here.     

基于CCD与CMOS的图像传感技术

概述了CCD图像传感器的原理、特点及发展趋势。对CMOS图像传感器的结构和工作原理,尤其是CMOS与CCD两类图像传感之间的不同进行综述。重点介绍了CMOS图像传感器的研究现状和发展趋势。     

What Makes a Theory Testable, or Is Intelligent Design Less Scientific Than String Theory?

I compare the theory of intelligent design to string theory to see on what basis, if any, only the former can be justifiably excluded as being scientific.We shall see that the classic criterion of testability or falsifiability is sometimes not so straightforward, and that there are other criteria to help us make such a distinction.     

基于粗糙集理论的智能数据分析模型

粗糙集理论作为一种智能数据分析和数据挖掘的新的数学工具,其主要优点在于它不需要任何关于被处理数据的先验或额外知识.提出了一种基于粗糙集理论的智能数据分析模型,从目标数据集出发,通过数据预处理、数据分类和规则获取,实现对原始数据集的智能分析,并通过实例测试验证了该模型的有效性.     

AT&T准则下完全检验的最优设计(英文)

本文研究了完全检验的质量控制问题,将广泛用于X-控制图的AT＆amp;T准则应用于完全检验,并根据完全检验的特点,提出一种新的最优模型,数值实验结果表明AT＆amp;T准则下的完全检验优于传统的完全检验。     

Application of computer vision and laser interferometer to the inspection of line scale

In the paper machine vision, laser interferometer and coordinate measuring machine (CMM) are combined to develop a vision inspection system. The measurement capability of the developed system is investigated by measuring the distances between the lines on a standard line scale. The vision camera is used to replace the probe of the CMM to take the images of the interested lines on a line scale at two different positions. Meanwhile, the displacement of the CCD camera is measured using laser interferometer. Using subpixel edge localization and outlier-excluding least-squares regression, the distance between two interested lines is computed under an image plane coordinate system. By adding the displacement of the CCD camera measured using laser interferometer, the line space can be determined. Experiments have been performed repeatedly to measure the line space on the 1.00 and 300.0 mm line scales. Results indicate that the measured data only have a little fluctuation and are close to those obtained by the NML (National Measurement Laboratory, Taiwan).