Relationships among Preparative Technique,Phase Composition and Bending Strength of Bauxite Porcelain

1 INTRODUCTION Bauxite porcelain is a novel “K2O–Al2O3–SiO2” system ceramic by using sintered bauxite, clay and potash feldspar and albite as the main raw materials with the Al2O3’s content of 50%～60(massfraction). Compared to the traditional“K2O–Al2O3–SiO2” feldspar porcelain by using quartz, bolus alb and potash feldspar and albite as the main raw materials, the bauxite porcelain possesses such advantages as high mechanical strength, excellent electrical insula- tion prop…     

Additivity Factors in the Binding of the Diethyltin(IV) Cation by Ligands Containing Amino and Carboxylic Groups at Different Ionic Strengths

Complex formation constants were determined potentiometrically (by a ISE-H⁺, glass electrode) in the systems, M²⁺ – L^z – H⁺ [M²⁺ = (C₂H₅)₂Sn²⁺, L^z = malonate, glycinate and ethylenediamine] at t = 25 ^∘C and 0.1 mol-L⁻¹≤ I/ ≤ 1 mol-L⁻¹ in NaCl_aq (0.1 mol-L⁻¹ ≤ I ≤ 0.75 mol-L⁻¹ for the ethylenediamine system). Thermodynamic values of formation constants, at infinite dilution, are [± 95% confidence interval, ^Tβ_pqr refer to the equilibrium, pM²⁺ + qL^z + rH⁺ = M_pL_qH_r^(2+z+r)]: for malonate, log₁₀ ^Tβ₁₁₀ = (5.47 ± 0.10); for glycinate, log₁₀ ^Tβ₁₁₀ = (9.54 ± 0.08), log₁₀ ^Tβ₁₁₁ = (12.97 ± 0.10); and for ethylenediamine, log₁₀ ^Tβ₁₁₀ = (10.47 ± 0.10), log₁₀ ^Tβ₁₂₀ = (16.17 ± 0.12) and log₁₀ ^Tβ₁₁₁ = (15.46 ± 0.10). The dependence on ionic strength of the formation constants was modeled by a simple Debye–Hückel type equation and by the SIT approach. By analyzing the stability of the species in the three different systems we found a simple additivity rule that can be expressed by the relationship: log₁₀ K = 6.46 n_N + 3.96 n_O − 0.60 (n_N²+ n_O²), with a mean deviation, ε(log₁₀ K) = 0.15 (K = equilibrium constant for the interaction of the organometal cation with the unprotonated or protonated ligand, n_N = number of amino groups and n_O = number of carboxylic groups of the ligand(s) involved in the formation reaction of complex species).     

Investigation of solution and solid-state properties of poly(R,R,4,4-cyclohexylidene diphenylene diphenyl-4,4-disulfonate)

Solution and solid-state properties of poly(R,R^′,4,4^′-cyclohexylidene diphenylene diphenyl-4,4^′-disulfonate) (PS-6: R=R^′=H; PS-7: R=CH₃, R^′=H; PS-8: R=R^′=Cl; PS-9: R=CH₃, R^′=Cl and PS-10: R=R^′=Br) have been determined and discussed in terms of nature of the substituents. Ultrasonic velocity (2 MHz) and acoustical parameters of PS-7 and PS-9 solutions in chloroform, 1,2-dichloroethane and tetrahydrofuran (THF) at 30, 35 and 40 °C have been evaluated to understand the effect of methyl and chlorine groups, concentration, and temperature on molecular interactions. The data are interpreted in light of solvent-polymer and polymer-polymer interactions. Predominant solvation is observed in THF system and the least in chloroform system at all three temperatures. The structural change is observed above 2%. Both the polymers possess structure-forming tendency and it is supported by positive values of S_n.The densities of PS-7 and PS-9 determined by floatation method are in excellent agreement with calculated values but those determined by specific volume method differ remarkably from calculated values due to solvation effect. PS-7 and PS-9 possess respectively tensile strength of 38.4 and 1.1 N/mm²; electric strength of 16.2 and 25.0 kV/mm and volume resistivity of 5.7×10¹⁶ and 1.0×1017Ωcm. The low tensile strength of PS-9 is due to low molecular weight, rigid and brittle nature of the polymer chains. PS-6 to PS-9 are thermally stable up to about 349-379 °C while PS-10 up to about 279 °C and involved two-step degradation. DTA thermograms indicated T_g at about 204-226 °C. High activation energy indicated rigid nature of the polymer chains and the positive magnitudes of ΔS* indicated less ordered transition state. The nature of the substituents (CH₃, Cl and Br) affected thermal, mechanical and electrical properties.     

Oscillator Strength Calculations with the Compromised Orbitals

The oscillator strength has been calculated from a common set of compromised orbitals, instead of sets of the two separately optimized non-orthogonal orbitals for the two states involved in the transition. Inaccuracies of two types arose from the calculations were assessed by investigating simple atomic and molecular systems.     

Modification of the resistance of two epoxy resins to accelerated weathering using calcium sulfate as a photostabilizer

Epoxy-timber composites have received increasing attention during the last decades because there are many advantages related to their uses as construction materials in applications such as timber bridges. However, the durability of epoxy-timber composites under outdoor conditions has become a concern for many epoxy resins. This study evaluated the chemical, thermal, and mechanical properties of two cured epoxies, the product of the diglycidyl ether of bisphenol A with 2,4-trimethyl-1,6-hexanediamine (DGEBA-TMDA) and the analogous resin prepared with the hydrogenated diglycidyl ether of bisphenol A (HDGEBA-TMDA), each mixed with 2?wt. % calcium sulfate (CS). We hypothesized that the use of CS, as an inorganic UV absorber, could decrease undesirable effects arising from exposure to UV light, moisture, and extreme temperatures.

An accelerated aging chamber simulated natural weathering for 1, 2, 3, 4, and 6?months. Chemical changes in cured epoxy systems over time in the presence and absence of CS fillers were determined using Fourier transform infrared spectroscopy (FT-IR). Thermal degradation profiles before and after exposure to accelerated weathering were followed by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) before and after accelerated weathering were measured, and the effect of accelerated weathering on the surface morphology of the epoxy systems was investigated by scanning electron microscopy (SEM). In the presence of CS, after 6?months accelerated weathering the tensile strength of DGEBA-TMDA reduced by 23.8?±?2.4%, compared to 46.5?±?5.5% in its absence, while the corresponding values for HDGEBA-TMDA were 21.4?±?2.1% and 28.7?±?1.8%.     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

Separation of polar and non-polar analytes using dimethyl sulfoxide-modified subcritical water

Separations using methanol–water or acetonitrile–water mixtures at different temperatures have been well investigated in reversed-phase liquid chromatography. However, reversed-phase separation with dimethyl sulfoxide (DMSO)–water mixtures is much less studied. In this work, separations of polyhydroxybenzenes, phenol derivatives, benzene, toluene, ethylbenzene, and xylenes (BTEX), and polycyclic aromatic hydrocarbons (PAHs) with DMSO-modified subcritical water were performed at several temperatures to evaluate the effect of temperature on the elution strength of DMSO–water mixtures. The column efficiency obtained by using DMSO-modified subcritical water was also studied. Finally, the resolution of ethylbenzene and p-xylene was investigated.     

Application of a sequential extraction procedure to study the release of elements from municipal solid waste incineration bottom ash

The release of five elements (Cr, Cu, Mn, Pb and Zn) from a municipal solid waste incineration bottom ash (BA) under different extraction conditions has been investigated by performing the three-step sequential extraction procedure proposed by the Standards, Measurements and Testing Program of the European Union. A fourth step (strong acid attack) has been added in order to calculate the mass balance. The results of this study provide information on the potential mobility of the studied elements. Almost all of the Cr and part of the Mn are extracted with strong acid which indicates low potential mobility in the environment. Most of the Cu is extracted under oxidizing conditions. Pb and Zn are released under acidic condition, indicating the possibility of their mobilization by changes in pH. The reproducibility of the sequential extraction procedure is also discussed.     

Dissociation quotients of succinic acid in aqueous sodium chloride media to 225°C

The first and second molal dissociation quotients of succinic acid were measured potentiometrically with a hydrogen-electrode, concentration cell. These measurements were carried out from 0 to 225°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The dissociation quotients from this and two other studies were combined and treated with empirical equations to yield the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: log K_1a=–4.210±0.003; H _1a ⁰ =2.9±0.2 kJ-mol^–1; S _1a ⁰ =–71±1 J-mol^–1-K^–1; and C _p1a ⁰ =–98±3 J-mol^–1-K^–1; and for the second acid dissociation equilibrium at 25°C: log K_2a=–5.638±0.001; H _2a ⁰ = –0.5±0.1 kJ-mol^–1; S _2a ⁰ =–109.7±0.4 J-mol^–1-K^–1; and C _p2a ⁰ = –215±8 J-mol^–1-K^–1.     

π-CONJUGATED OLIGOMERS IN SUPRAMOLECULAR CRYSTALS AND THEIR OPTOELECTRONIC FUNCTIONS

Functional organic molecular materials and conjugated oligomers or polymers now allow the low-cost fabrication of thin films for insertion into new generations of electronic and optoelectronic devices. The performance of these devices relies on the understanding and optimization of several complementary processes. Our goal is to discuss the relationship between the molecular stacking structures and their optoelectronic properties that are of importance in all these areas. The concept of intermolecular interaction should be taken here in the special sense that is inter-dipole coupling. Specifically, we will address the impact of inter-dipole interaction between adjacent molecules in aggregate state on the solid-state emission properties.