Simultaneous quantitative analysis of ketanserin and ketanserinol in plasma by RP-HPLC with fluorescence detection

A sensitive and selective high-performance liquid chromatographic assay for the quantification of ketanserin and ketanserinol in human plasma was developed and validated. The procedure involves extraction of ketanserin and ketanserinol from plasma using an Extrelut NT-1 solid-phase extraction column. The chromatograph was equipped with a Hypersil BDS column (100 x 4.5 mm, 3 micro m particle size). Separation was performed with a mixture of acetate buffer 0.01 M, pH 4.9-methanol-acetonitrile (52:40:8, v/v/v). Detection was performed with fluorescence detection (lambda(ex) = 332 nm and lambda(em) = 410 nm). Calibration curves were linear (r(2) = 0.999) in the range 0-400 ng/mL for both ketanserin and ketanserinol. The repeatability coefficient for ketanserin and ketanserinol was 3.1 and 3.0%, respectively. The reproducibility coefficient for ketanserin and ketanserinol was 10.5 and 9.1%, respectively. The limit of quantification for both ketanserin and ketanserinol was 2.0 ng/mL. The mean recovery yield for both ketanserin and ketanserinol was 60%. In an 8 h work day approximately 60 samples, including calibration and reference standards, could be processed.     

The regioselectivity of the formation of 2-pyrazolylthiazoles and their precursors from the reaction of 2-hydrazinothiazoles with 4,4,4-trifluoro-1-hetaryl-1,3-butanediones

Reaction of 2-hydrazinothiazoles 1 with 1-thienyl- and 1-furyl-1,3-butanediones 2a,b in methanol in the presence of hydrochloric acid mainly leads to a mixture of pyrazoles 3 and pyrazolines 4 or pyrazoles 3 and 5 in strong acidic conditions. Isomeric hydrazones 6 and pyrazolines 4 were formed and isolated in these reactions in the absence of hydrochloric acid. It has been shown that the regioselectivity in the reaction of diketones 2 with hydrazine 1 is governed by both the concentration of acid and the nature of substituents in the 1,3-diketones 2. Cyclization of hydrazones 6 is shown to occur under milder conditions than dehydration for pyrazolines 4. The new heterocyclic compounds were prepared and fully characterized by NMR spectra and by X-ray analysis for 3c.     

Antibody synthesis induced by endogenous internal images

In this study, immunization with a vaccine consisting of multiple F(abt’)₂ fragments of affinity-purified antitetanus toxoid antibodies covalently bound to a carrier protein successfully induced antitetanus toxoid antibodies. Further studies showed that this vaccine preparation contained no biologically detectable tetanus antigen. The induced antitetanus antibody (Ab1t’) titer was higher than the titer of antibodies binding control antigens. The immunizing F(abt’)₂ preparation did not elicit a secondary antitetanus response from mice primed with tetanus toxoid and, hence, appeared free of tetanus epitopes. The specificity of Ab1t’ was established by absorption and inhibition with antigen. Immunization with antitetanus F(abt’)₂ (Ab1t’) fragments appears to have elicited naturally occurring autologous antitetanus toxoid antibody (Ab1t’) through an idiotypic pathway. As predicted by network theory, anti-idiotype (Ab2) and antitetanus (Ab1t’) cycled reciprocally. Clonotypic characterization of Ab1t’ using isoelectric focusing and affinity immunoblotting showed increases in Ab1t’ titer to be the result of increased synthesis by limited subsets of antitetanus toxoid B-cell clones and not increased synthesis by multiple clones, as is characteristic of antigen-driven Ab1 responses. Many Ab1 and Ab1t’ clonotypes had identical pIs, suggesting that they either share V region genes or are the product of the same B-cell clones. These findings indicate that immunization with polyclonal multivalent Ab1 preparations can trigger active synthesis of antibodies with the same specificity. The results provide further evidence for naturally occurring idiotypic cascades that could be exploited for studies of catalytic antibodies.     

0.6~T人体核磁共振成象及其图象的彩色化处理

在0.6~τ超导磁体人体核磁共振成象设备上获得了横断、矢状、冠状各种断层的成象。采用了直接两维傅里叶变换成象方法,应用了自旋回波脉冲序列。由于人体心脏跳动和呼吸运动会造成图象模糊而使用心电延迟触发及呼吸门控方法。作者用一种相位调制光密度分割的方法将原始黑白灰度表示的核磁共振成象进行彩色化处理。提高了原图象低密度梯度区的清晰度,为进行医学图象诊断及判读解译提供了方便度。山了光学系统图,解释了光学信息处理方法。由所处理的人体核磁共振成象图片可以看出,在低密度梯给区更易辨认。参考文献10种。     

水溶性金属卟啉肿瘤靶向磁共振成像造影剂的研究

利用显微荧光－阿达玛变换三维图像分析研究了Ｃｕ－ＴＳＰＰ，Ｍｎ－ＴＳＰＰ，Ｃｕ－ＴＭＡＰ，Ｍｎ－ＴＭＡＰ４种水溶性金属卟啉人细胞间质进入肿瘤细胞内的富集过程，对金属卟啉的自旋－晶格驰豫性能（Ｒ１）的天空结果表明，Ｍｎ（Ⅱ）卟啉配合物的Ｒ１、值结Ｇｄ－ＤＴＰＡ提高１．５－２倍。     

Real‐time lock‐in energy loss imaging with a novel high‐speed image processing CCD video camera

We have developed a high‐speed image processing CCD video camera for real‐time energy‐loss imaging using a conventional electron microscope with an energy‐loss imaging facility. As an initial demonstration of real‐time lock‐in energy‐loss imaging, a background‐subtracted energy‐loss image was observed by attaching the high‐speed image processing CCD video camera to an analytical electron microscope equipped with a floating‐type energy‐loss imaging analyser. Copyright © 2003 John Wiley & Sons, Ltd.     

Oxidation products of the niobium tungsten oxide Nb4W13O47: A high-resolution scanning transmission electron microscopy study

Nb₄W₁₃O₄₇, a member of the solid solution series Nb_8−nW_9+nO₄₇ (0?n?5), crystallizes in a threefold superstructure of the tetragonal tungsten bronze structure. While the oxidation of this reduced phase at T_OX=1200 °C leads to a separation into the thermodynamically stable phases, lower oxidation temperatures result in products that comprise new structural elements and ordering variants. The characterization of the oxidation products obtained at T_OX=1000 °C was performed by scanning transmission electron microscopy applying a high-angle annular dark field detector. At the selected imaging conditions (Z contrast), not only the metal positions are revealed by this technique but valuable additional information about the elemental distribution can be obtained simultaneously.     

纳米分辨率的三维形貌检测仪

从光干涉方式，瞳窗关系和光源带宽等基本关系出发，利用空间不变系统理论解析了相移显微干涉检测系统中衍射效应的影响。为了减小横向分辨率对纵向分辨率的影响，利用相关信息提取或数字滤波的方法，获得了纳米分辨率的三维形貌。     

Fourier transform spectroscopy using image sensors

Multichannel Fourier transform spectrometers utilizing image sensing devices are reviewed along with the instrumental design concepts. Although the idea itself is fairly simple, a photographic plate in holographic spectroscopy is replaced by an image sensor, there are stringent requirements to be satisfied in order to realize the system for field use. Mainly two types of the instrument, which are characterized by the Sagnac common-path interferometer and the polarization interferometer optics, respectively, are described with regard to their system performances. Examples of the system operation introduced show that Fourier transform spectrometers without mechanical moving parts play an important role in a variety of spectroscopic applications under severe surroundings. In a summary, methods for the resolution enhancement and comments on the signal-to-noise ratio are also included.