Solid Introduction to an ICP-Atomic Emission Spectrometer for the Analyses of Metals Contents of Air Filters

The direct introduction of solid samples (air filters) to the inductively coupled plasma source of an atomic emission spectrometer using a furnace atomizer has been studied. Conditions have been found for the analysis of elements which volatilize with varyling degrees of difficulty. Lead, copper and vandaium compounds retained on glass fibre filters from air pollution studies have been determined. The results are in good agreement with those obtained by means of established sample dissolution/atomic emision methods.     

Enhanced multi‐objective optimization of a dimpled channel through evolutionary algorithms and multiple surrogate methods

Using a multi‐objective evolutionary algorithm (MOEA) and enhanced surrogate approximations, the present study demonstrates the numerical analysis and optimization of staggered‐dimple channels. Two surrogates, the response surface approximation (RSA) model and the Kriging (KRG) model, are applied in light of the surrogate fidelity of the approximate analysis. An enhanced Pareto‐optimal front is obtained by performing local resampling of the Pareto‐optimal front, which provides relatively more accurate Pareto‐optimal solutions in the design space for each surrogate model. Three dimensionless design variables are selected, which are related to geometric parameters, namely, the channel height, dimple print diameter, dimple spacing, and dimple depth. Two objective functions are selected that are related to the heat transfer and pressure loss, respectively. The objective‐function values are numerically evaluated through Reynolds‐averaged Navier–Stokes analysis at the design points that are selected through the Latin hypercube sampling method. Using these numerical simulations two surrogates, viz, the RSA and Kriging models, are constructed for each objective function and a hybrid MOEA is applied to obtain the Pareto‐optimal front. For the particular implementation of surrogate models, it is observed that Pareto‐optimal predictions of the RSA model are better than those of the KRG model, whereas the KRG model predicts equally well at the off‐Pareto‐region (region away from the Pareto‐optimal solutions), which is not the case with the RSA model. The local resampling of the Pareto‐optimal front increases the fidelity of the approximate solutions near the Pareto‐optimal region. The ratios of the channel height to the dimple print diameter and of the dimple print diameter to the dimple pitch are found to be more sensitive along the Pareto‐optimal front than the ratio of the dimple depth to the print diameter. The decrease of the ratio of the channel height to the dimple diameter and the increase of the ratio of the dimple print diameter to the pitch lead to greater heat transfer at the expense of the pressure loss, whereas the ratio of the dimple depth to the print diameter is rather insensitive to Pareto‐optimal solutions. Pareto‐optimal solutions at higher values of the Nusselt number are associated with higher values of the pressure loss due to the increased recirculation, mixing of fluid and vorticity generation. Copyright © 2010 John Wiley & Sons, Ltd.     

小型家用空调器除霜方式的探讨

提高低温制热量是小型家用空调器技术的一个难点,除霜带来的热量损失是低温制热量损失的一个重要方面。对小型家用空调器的除霜技术的发展进行了分析和总结,对小型家用空调器提出了一些新的除霜方式,对提高空调器的低温制热量、使用性能有重要意义。     

变频空调制冷系统流量调节性能分析和实验研究

通过实验分析不同膨胀阀开度和压缩机频率下系统性能。过热度在‘0’点及前后情况下,制冷系统性能及回油状况随膨胀阀开度调节,会出现较大变化。且在过热度为‘0’时系统制冷量和能效比最高。同时对不同频率下系统性能参数变化规律尤其是换热器效率影响进行分析。给出膨胀阀开度和压缩机变转速联合调节在系统性能最优状态下调节策略。     

用修正的RELIEF方法测量高速空气流瞬时速度的理论研究

修正了拉曼激发激光感应电子荧光（ＲａｍａｎＥｘｃｉａｔｉｏｎｐｕｌｓｅＬａｓｅｒ－ｉｎｄｕｃｅｄＥｌｅｃｔｒｏｎｉｃＦｌｕｏｒｅｓｃｅｎｃｅ简称ＲＥＬＩＥＦ）方法，以实现对亚音速和超音速空气流多点时速度的测量，测量精度优于２％。     

Sol-Gel Nanosized Semiconducting Titania-Based Powders for Thick-Film Gas Sensors

Pure, 5 at%, and 10 at% Ta- or Nb-doped TiO₂ nanosized powders were prepared by the sol-gel method. The powders heated to 400°C have the crystalline anatase structure. While the pure TiO₂ powder heated to 850°C has the rutile structure, the addition of Ta and Nb inhibited the anatase-to-rutile phase transformation at this temperature. Ta was soluble in the titania lattice up to the concentration of 10 at%, while the solubility of Nb was 5 at%. Thick films were fabricated with these powders by screen printing technology and then fired at 650°C and 850°C for 1 h. SEM observations showed that the anatase-to-rutile phase transformation induces a grain growth of about one order of magnitude for pure TiO₂. The addition of Ta and Nb is effective to keep the TiO₂ grain size at the nanometric level even at 850°C. Conductance measurements showed that a good gas response is observed only for the nanostructured titania-based films. The CO response of these materials is only slightly affected by humidity.     

二次风率对分级进风燃烧室内湍流燃烧与NOx生成的影响

本文在分级进风燃烧室的热态实验装置上,测量了燃烧室内湍流燃烧的温度场和组分浓度场,研究了分级进风的流量比率即二次风率对燃烧及NOx生成的影响.得到了四组不同二次风率下燃烧室内气体温度和O2、CO2、CO与NO浓度的分布.     

零排放燃气轮机的空气动力学特性

本文对采用二氧化碳作为基本工作流体的半闭环燃气轮机循环的空气动力学特性进行了详尽的分析.结果表明,不同工作流体的比热比值对压气机的压比、等熵效率及临界堵塞质量流量影响很大,并详细阐述了一种比热比对透平机械性能影响的修正方法,进而提出了一种零排放发动机的设计新思路,揭示了最初为空气工质而设计的压气机可以直接用于CO2零排放发动机中.     

高温水蓄冷空调的原理和理论分析

介绍了一种新型高温水蓄冷空调方案的原理井进行了理论分析。它可利用高至３８℃水的显热或其它材料的相变潜热来蓄冷空调．分析了完全不掺混系统的性能与过冷水流率的关系；给出了完全掺混系统非稳态循环的性能变化；数值计算并讨论了蓄冷水部分掺混系统的温度分层和动态特性、为高温水蓄冷空调系统的设计和运行提供了理论指导．     

基于高/多光谱图像空天一体融合仿真方法

提出了一种基于高/多光谱图像的空天一体融合仿真方法. 以航空高光谱数据为基础, 根据航天多光谱遥感相关参数, 通过空天一体光谱维变换、尺度空间变换、辐射强度变换、混合像素变换和噪声变换将 航空高光谱图像中的地物目标进行空天一体映射到航天多光谱图像中, 得到特定地物目标的航天多光谱融合模拟仿真图像. 仿真实验表明该方法简便易行, 有效地减少了地物目标的三维建模和探测器响应建模的巨大工作量, 较好地实现了对特定地物目标航天多光谱图像的模拟, 开拓了遥感图像仿真模拟方法的新领域, 具有重要的研究和应用价值. 关键词： 遥感图像 空天一体 融合仿真 光谱维变换