Scaled radar cross section measurement method for lossy targets via dynamically matching reflection coefficients in THz band

In the terahertz band, the dispersive characteristic of dielectric material is one of the major problems in the scaled radar cross section (RCS) measurement, which is inconsistent with the electrodynamics similitude deducted according to the Maxwell's equations. Based on the high-frequency estimation method of physical optics (PO), a scaled RCS measurement method for lossy objects is proposed through dynamically matching the reflection coefficients according to the distribution of the object facets. Simulations of the model of SLICY are conducted, and the inversed RCS of the lossy prototype is obtained using the proposed method. Comparing the inversed RCS with the calculated results, the validity of the proposed method is demonstrated. The proposed method provides an effective solution to the scaled RCS measurement for lossy objects in the THz band.     

Z箍缩动态黑腔阴影像诊断研究

为了获得填充泡沫的钨丝阵动态黑腔动力学演化图像, 研究钨等离子体与泡沫柱的相互作用形式, 在1 MA脉冲功率装置上设计了四分幅紫外探针光(266 nm)阴影成像系统, 该系统时间分辨为2.5 ns, 静态空间分辨优于70 μm, 径向阴影图像展示了从固体丝膨胀消融到先驱等离子体与泡沫相互作用, 从泡沫的箍缩到反弹膨胀的全过程. 图像显示了在长约50 ns时间内丝等离子体以雨的形式持续与泡沫相互作用, 在整个箍缩阶段并未观察到等离子体壳层结构. 定量分析表明泡沫柱的最小箍缩速度为1.0×10⁶ cm/s, 最大箍缩速度为6.0×10⁶ cm/s, 在轴上滞止的直径约为1 mm. 通过对数值模拟计算结果的讨论, 明确了在Z箍缩等离子体状态下阴 影成像结果主要反映了逆轫致吸收效应, 与径向功率波形的时间关联给出了钨等离子体主体与泡沫柱相互作用时刻的图像. 关键词： 动态黑腔 阴影像 箍缩速度     

再发射技术测量SGⅡ黑腔靶早期对称性

利用再发射技术能够有效测量早期辐射驱动对称性。2011年在神光Ⅱ激光装置上,采用Bi替代靶,通过改变靶丸的支撑方式和优化探测器配置,利用分幅相机获得较高信噪比的Bi球表面再发射图像。利用实验结果获得了入射流不对称性P2分量随时间的变化,对比两种腔长的黑腔,P2分量随时间的变化存在明显差别。两种腔P2分量随时间的变化趋势与采用视角因子模拟的结果基本一致。     

DMH镀金体系在ICF空腔靶中的应用

将 5,5-二甲基乙内酰脲(DMH)新型无氰电镀体系应用于惯性约束聚变金空腔靶制备中。利用扫描电镜和库仑计法研究了以DMH为配位剂的镀液组成和工艺条件对电镀金层质量等的影响。结果表明:该镀液体系具有良好的稳定性,控制镀液中金盐质量浓度为8 g/L,DMH质量浓度为80 g/L时,在阴极电流密度1.5 A/dm2、pH值9~10、温度45 ℃的条件下,可制得结晶致密、厚度均一的金镀层。     

Turbulent liquid metal flow in rectangular shaped contraction nozzles for target applications

Owing to the high beam power densities envisaged in advanced nuclear targets, liquid metal-operated free surface targets are conceived as one feasible option. There, the free surface is formed by an adequately shaped upstream located nozzle. Target boundary conditions necessitate a detailed knowledge on the turbulent flow in contraction nozzles in order to identify turbulence models accurately predicting experimental findings within the velocity range of interest for nuclear target and hence can then act as design optimisation tools. In this context, a combined experimental and numerical study is conducted on the basis of the turbulent flow in the contraction nozzle of the Super-FRS target. Two aspects determining the turbulent flow in the nozzle have been investigated. The first is a potential relaminarisation of the boundary layer caused by the acceleration within the contraction and the second is a development of the secondary flows due to the pressure gradient in the rectangular shaped ducts cross-section. Regarding the three different turbulence models investigated here only the V2F model exhibited the capability to predict the relaminarisation of the turbulent boundary layer both qualitatively and quantitatively. All turbulence models are able to predict the development of secondary flows induced by pressure gradients in transverse direction with an acceptable accuracy.     

吖啶类化合物在抗肿瘤方面的研究进展

吖啶类衍生物是一类含氮的有机杂环化合物,由于其在抗炎、抗菌及抗肿瘤方面体现了较好的生物活性而受到了广泛关注。本文对近年来吖啶类化合物在抗肿瘤方面的国内外研究成果进行了综述,对其主要作用靶点如端粒酶、拓扑异构酶Ⅰ/Ⅱ、微管蛋白、ABCG2/ P-glycoprotein (P-gP)以及蛋白激酶等方面的研究进行了介绍,并指出该类化合物的发展方向及应用前景。     

Recent result from the A2 real photon facility at MAMI

The upgraded MAMI C accelerator is delivering electrons with an energy of 1558 MeV routinely. The A2 collaboration is doing experiments with energy marked polarised real photons produced via ＂Bremsstrahlung＂. Recent results from the GDH-experiment using a longitudinal polarised frozen spin target in combination with the DAPHNE detector and from the Crystal Ball experiment at MAMI are presented.     

超热电子的产生与输运背向辐射的实验研究

报道了在100TW fs激光器上采用电子磁谱仪和光学CCD积分成像相机分别对激光-固体靶相互作用在靶背方向产生的超热电子能谱及其光学渡越辐射进行的测量。能谱测量结果显示：超热电子能谱呈单温类-麦克斯韦分布,拟合的温度为107keV;光学渡越辐射(OTR)测量结果显示：OTR是由于超热电子输运穿越固体靶所致,而辐射区域呈圆盘状、有发散角、有光强分布;如果考虑超热电子的产生和加热机制,则占主导地位的加热机制是共振吸收对电子的加热。     

超热电子的产生与输运背向辐射的实验研究

报道了在100TW fs激光器上采用电子磁谱仪和光学CCD积分成像相机分别对激光-固体靶相互作用在靶背方向产生的超热电子能谱及其光学渡越辐射进行的测量.能谱测量结果显示:超热电子能谱呈单温类-麦克斯韦分布,拟合的温度为107 keV;光学渡越辐射(OTR)测量结果显示:OTR是由于超热电子输运穿越固体靶所致,而辐射区域呈圆盘状、有发散角、有光强分布;如果考虑超热电子的产生和加热机制,则占主导地位的加热机制是共振吸收对电子的加热.     

基频光腔靶辐射温度定标

研究腔靶辐射温度和X光耦合效率与靶结构及激光辐照条件的依赖关系。利用神光-Ⅱ基频光(波长1．053μm,能量3～5kJ／8束,脉宽0．6～0．9ns)辐照金腔靶。采用软X光能谱仪及平响应探测器分别测量腔靶诊断口辐射X光功率谱及其能量角分布。同时,利用五针孔时、空分辨成像技术对腔靶诊断口发射软X光进行实验观测,给出辐射温度推算中需要的等效诊断口面积修正因子。在北京同步辐射软X光标定站,对上述诊断用软X光探测元器件进行了全谱范围(0．05～1．5kev)的绝对标定,以提高X光辐射功率和黑腔辐射温度的诊断精度．